authing clients - Debug Mode - More Output!!!!

[emerson]

Ready to process requests.
rad_recv: Access-Request packet from host 10.254.0.2:2048, id=115, length=165
--- Walking the entire request list ---
Waking up in 31 seconds...
Threads: total/active/spare threads = 5/0/5
Thread 1 got semaphore
Thread 1 handling request 0, (1 handled so far)
        User-Name = "joao"
        NAS-IP-Address = 10.254.0.2
        NAS-Port = 0
        Called-Station-Id = "004f6207b40c"
        Calling-Station-Id = "0014a53c478d"
        NAS-Identifier = "Realtek Access Point. 8181"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x02000009016a6f616f
        Message-Authenticator = 0xdcc560812d6c0bad0bc665744157e53a
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  rlm_eap: EAP packet type response id 0 length 9
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
radius_xlat:  'joao'
rlm_sql (sql): sql_set_user escaped user --> 'joao'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM radcheck           WHERE Username = 'joao'           ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat:  'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE usergroup.Username = 'joao' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM radreply           WHERE Username = 'joao'           ORDER BY id'
radius_xlat:  'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE usergroup.Username = 'joao' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
  modcall[authorize]: module "sql" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type Local
auth: type Local
auth: No User-Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
Login incorrect: [joao/<no User-Password attribute>] (from client mslink-radius port 0 cli 0014a53c478d)
Delaying request 0 for 1 seconds
Finished request 0