freeradius 1.1.0 with rp-pppoe 3.8 pppoe-server

[Seferovic Edvin]

Again !

As far as FreeRADIUS returns the attributes and values which are expected to
be returned. The mistake in system is out of FreeRADIUS range. And this list
is not a support hotline for misconfiguration on the rest of the system ;) 

Your PPPoE server should load radius.so and then radattr.so !

Ive just tested the radattr.so module on my Poptop server ( without any
special config - just added the module ) and it is working as it should. 

Have you entered the attributes in both dictionaries? Server & client
dictionary ??

Regards,

Edvin

-----Original Message-----
From: freeradius-users-bounces+edvin.seferovic=kolp.at at lists.freeradius.org
[mailto:freeradius-users-bounces+edvin.seferovic=kolp.at at lists.freeradius.or
g] On Behalf Of root linux
Sent: Mittwoch, 31. Mai 2006 04:22
To: FreeRadius users mailing list
Subject: Re: freeradius 1.1.0 with rp-pppoe 3.8 pppoe-server

I included the below into
/etc/radiusclient/dictionary: -

ATTRIBUTE       RP-Upstream-Speed-Limit 81     
integer
ATTRIBUTE       RP-Downstream-Speed-Limit       82    
 integer


But it doesn't help... the output from the
/var/run/radattr.ppp0 still shows the below: -

Idle-Timeout 300

Below is the output from radtest command: -

[root at gw01 run]# radtest testuser testpass 127.0.0.1
10 glsbb2005
Sending Access-Request of id 194 to 127.0.0.1 port
1812
        User-Name = "testuser"
        User-Password = "testpass"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 10
rad_recv: Access-Accept packet from host
127.0.0.1:1812, id=194, length=50
        Idle-Timeout = 300
        RP-Upstream-Speed-Limit = 64
        RP-Downstream-Speed-Limit = 128



--- Damjan <gdamjan at mail.net.mk> wrote:

> > Below is the output from the /var/run/radattr.ppp0
> :-
> > 
> > Idle-Timeout 300
> > 
> > 
> > Below is the output from "radiusd -X" :-
> > 
> > Sending Access-Accept of id 74 to 127.0.0.1 port
> 32797
> >         Idle-Timeout = 300
> >         RP-Upstream-Speed-Limit = 64
> >         RP-Downstream-Speed-Limit = 128
> > Finished request 8
> > 
> > 
> > I don't see any RP-Upstream-Speed-Limit or
> > RP-Downstream-Speed-Limit...why?
> 
> You need to have the dictionary with
> RP-Upstream-Speed-Limit and
> RP-Downstream-Speed-Limit installed in
> /etc/radiusclient/ and
> /etc/radiusclient/radiusclient.conf .
> 
> -- 
> damjan | дамјан
> This is my jabber ID -->         damjan at bagra.net.mk
> 
>  -- not my mail address, it's a Jabber ID --^ :)
> - 
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam
protection around 
http://mail.yahoo.com 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
- 
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html