Need help setting up FreeRadius using PEAP/MSChapV2
Graham, Robert
rgraham at mem-ins.com
Fri Nov 3 03:34:44 CET 2006
A year ago I tried to set up 802.1x on our network using PEAP/MSChapV2 without any luck, but wanted to try again so here I am. I followed the document titled, "FreeRADIUS Active Directory Integration HOWTO" on the FreeRadius Wiki site and I am still not able to authenicate against AD. I hope someone out there can provide some assistance and HELP me out. I have included the debug out below. Any help would GREATLY be appreciated...
[root at mem-co-radius3 raddb]# /usr/local/sbin/radiusd -XA
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = yes
mschap: passwd = "(null)"
mschap: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "peap"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem"
tls: private_key_password = "whatever"
tls: dh_file = "/usr/local/etc/raddb/certs/dh"
tls: random_file = "/dev/urandom"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
peap: default_eap_type = "mschapv2"
peap: copy_request_to_tunnel = no
peap: use_tunneled_reply = no
peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 172.16.1.243:1645, id=166, length=112
User-Name = "MEM\\rgraham"
Service-Type = Framed-User
Framed-MTU = 1500
NAS-IP-Address = 172.16.1.243
NAS-Port = 13
Calling-Station-Id = "00-15-58-32-95-BB"
EAP-Message = 0x02010010014d454d5c7267726168616d
Message-Authenticator = 0x129b48f31fd82471f30cc7fb9f2b16c0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 1 length 16
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 166 to 172.16.1.243 port 1645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xe5c2ae6e98091f71681bce0ece77b661
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.16.1.243:1645, id=167, length=95
User-Name = "0015583295bb"
User-Password = "0015583295bb"
Service-Type = Framed-User
Framed-MTU = 1500
NAS-IP-Address = 172.16.1.243
NAS-Port = 13
Calling-Station-Id = "00-15-58-32-95-BB"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "0015583295bb", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 1
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns ok) for request 1
rad_check_password: Found Auth-Type System
auth: type "System"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
modcall[authenticate]: module "unix" returns notfound for request 1
modcall: leaving group authenticate (returns notfound) for request 1
auth: Failed to validate the user.
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.16.1.243:1645, id=168, length=236
User-Name = "MEM\\rgraham"
Service-Type = Framed-User
Framed-MTU = 1500
NAS-IP-Address = 172.16.1.243
NAS-Port = 13
Calling-Station-Id = "00-15-58-32-95-BB"
State = 0xe5c2ae6e98091f71681bce0ece77b661
EAP-Message = 0x0202007a198000000070160301006b010000670301454aa65119092ed15cac0bf2dd1cfa4ae4ba44f4f6fb75edb0d148540e065a03000018002f00350005000ac009c00ac013c01400320038001300040100002600000010000e00000b6d656d5c7267726168616d000a00080006001700180019000b00020100
Message-Authenticator = 0xd1271dca6c660ae3adf19b38556b5d25
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 2 length 122
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
modcall[authorize]: module "files" returns ok for request 2
modcall: leaving group authorize (returns updated) for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 006b], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0681], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A
rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group authenticate (returns handled) for request 2
Sending Access-Challenge of id 168 to 172.16.1.243 port 1645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x0e5216a179547e2d1679c45745a5d2b6833dcd6ab5cae91dd82caa3a5d81cabde7904fb35d62d5c381704cfef893d16f5afd2ab8ecf9ec619033bd833e3a04d659a757355aa76422d22746562d637000039630820392308202fba003020102020100300d06092a864886f70d0101040500308193310b30090603550406130255533111300f060355040813084d6973736f7572693111300f06035504071308436f6c756d626961312c302a060355040a13234d6973736f75726920456d706c6f79657273204d757475616c20496e737572616e6365310b3009060355040b130249543123302106092a864886f70d01090116147365637572697479406d
EAP-Message = 0x656d2d696e732e636f6d301e170d3036313130323233
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4722dd921ba28f05b6a3ce4dd0c63ff5
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.16.1.243:1645, id=169, length=120
User-Name = "MEM\\rgraham"
Service-Type = Framed-User
Framed-MTU = 1500
NAS-IP-Address = 172.16.1.243
NAS-Port = 13
Calling-Station-Id = "00-15-58-32-95-BB"
State = 0x4722dd921ba28f05b6a3ce4dd0c63ff5
EAP-Message = 0x020300061900
Message-Authenticator = 0x2fe4ba89411ecaaf30d4b0fcc21e009c
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "chap" returns noop for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
modcall[authorize]: module "files" returns ok for request 3
modcall: leaving group authorize (returns updated) for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 3
modcall: leaving group authenticate (returns handled) for request 3
Sending Access-Challenge of id 169 to 172.16.1.243 port 1645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x6c20496e737572616e6365310b3009060355040b130249543123302106092a864886f70d01090116147365637572697479406d656d2d696e732e636f6d820100300c0603551d13040530030101ff300d06092a864886f70d01010405000381810079c9916ca05fde402cf2e85befa2ae87244447523a09a922320183d8694faa74dd7d5addf7164ef96350a24df5da75050a54ea796738036a65be17fcd71521fe61b0f3e69e635f93c24887d88be2fc45c7c4a5dbb9cfb745852c476c7a439ceaf3e1348232bece52c82f453a8ace4319cdc35f41593c22f04acf76515acf898f16030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x8ce86c1c3a38aed8bcb14c9da3a5743f
Finished request 3
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.16.1.243:1645, id=170, length=322
User-Name = "MEM\\rgraham"
Service-Type = Framed-User
Framed-MTU = 1500
NAS-IP-Address = 172.16.1.243
NAS-Port = 13
Calling-Station-Id = "00-15-58-32-95-BB"
State = 0x8ce86c1c3a38aed8bcb14c9da3a5743f
EAP-Message = 0x020400d01980000000c61603010086100000820080b77d0443340fa7e3b42f8318960f944f15a0a73271046b0d214a6c34fb25a701ae2c03fd2c21dd496240b1c8238f72a3a527151715148068e72feb05b580156d320cce3657cd8e5ff327981c1ba0021ce8bb23c94243d18d03c083fef43c2928a2d903ee759cc6b97c8be550b65e5c0cadf681e16f40688363093327061599671403010001011603010030cb59268377c2f35bbb5ed04112bb5d080c903154fe75ba0e9353913f943962405da3b30e5931e143ddb32a0715ce32a3
Message-Authenticator = 0x32568f629d463150d30fcdcb1f4a9221
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
modcall[authorize]: module "chap" returns noop for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 4 length 208
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
modcall[authorize]: module "files" returns ok for request 4
modcall: leaving group authorize (returns updated) for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
TLS_accept: SSLv3 read client key exchange A
rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 read finished A
rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
TLS_accept: SSLv3 write change cipher spec A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 write finished A
TLS_accept: SSLv3 flush data
(other): SSL negotiation finished successfully
rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
SSL Connection Established
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 4
modcall: leaving group authenticate (returns handled) for request 4
Sending Access-Challenge of id 170 to 172.16.1.243 port 1645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x01050041190014030100010116030100304af5b337b3cda8be50cdfb95d5d40e0d5edf65aaf35d6103df543a82b1df2c90676adf32b1277e7837bce039fd169873
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x3fa55aa771536d2480fa32bd3214f790
Finished request 4
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.16.1.243:1645, id=171, length=120
User-Name = "MEM\\rgraham"
Service-Type = Framed-User
Framed-MTU = 1500
NAS-IP-Address = 172.16.1.243
NAS-Port = 13
Calling-Station-Id = "00-15-58-32-95-BB"
State = 0x3fa55aa771536d2480fa32bd3214f790
EAP-Message = 0x020500061900
Message-Authenticator = 0x5681e2ac70ffdfed2a265d2beeb405de
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 5 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
modcall[authorize]: module "files" returns ok for request 5
modcall: leaving group authorize (returns updated) for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake is finished
eaptls_verify returned 3
eaptls_process returned 3
rlm_eap_peap: EAPTLS_SUCCESS
modcall[authenticate]: module "eap" returns handled for request 5
modcall: leaving group authenticate (returns handled) for request 5
Sending Access-Challenge of id 171 to 172.16.1.243 port 1645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x0106005019001703010020d08cd78b8085bb7e97b9adbe129e47fa17a094ff284ec4df5b954f625a749c1e1703010020e4aaebed0bf703160bb667600586ff0fdc1a75d6264db7a51ffe165cca8e943d
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x83dac1e77347d020ee17ac371330f05e
Finished request 5
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 166 with timestamp 454aa651
Sending Access-Reject of id 167 to 172.16.1.243 port 1645
Cleaning up request 1 ID 167 with timestamp 454aa651
Cleaning up request 2 ID 168 with timestamp 454aa651
Cleaning up request 3 ID 169 with timestamp 454aa651
Cleaning up request 4 ID 170 with timestamp 454aa651
Cleaning up request 5 ID 171 with timestamp 454aa651
Nothing to do. Sleeping until we see a request.
More information about the Freeradius-Users
mailing list