help configureing a proxium Tsunami MP.11 5054-R and free radius

[Cameron Cowie]

Hi:

really simple question here...

 in my user file I have
0020A666B9E6    Auth-Type := local,    User-Password :="qwerty1"

in my clients.conf file I have
client 172.16.20.18 {
        secret = qwerty1
        shortname = base
}

my show system on the Tsunami is

System Name                   :base
System Mode                   :bridge
Descriptor                    :Tsunami MP.11 5054-R v2.3.0(169) 
SN-06UT30570483
Location                      :<BLANKED OUT by ME>
Contact Name                  :xxxxxx
Contact Email                 :info at xxx.xx
Contact Number                :+xxx xx xxxx
Up Time (DD:HH:MM:SS)         :0:0:46:6
System OID                    :1.3.6.1.4.1.11898.2.4.9
Ethernet MAC Address          :00:20:A6:66:B9:E6
Country                       :ZA
System Flash Backup Interval  :120
Device HW Type                :Outdoor


now when I reboot the modem I get the following error when I do a radius -XX
Waking up in 31 seconds...
Thread 1 got semaphore
Thread 1 handling request 0, (1 handled so far)
        User-Name = "0020a6-66b9e6"
        User-Password = "qwerty1"
        NAS-IP-Address = 172.16.20.18
        NAS-Port = 0
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "0020a6-66b9e6", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
  modcall[authorize]: module "files" returns notfound for request 0
modcall: leaving group authorize (returns ok) for request 0
auth: No authenticate method (Auth-Type) configuration found for the 
request: Rejecting the user
auth: Failed to validate the user.
Login incorrect: [0020a6-66b9e6/qwerty1] (from client base port 0)
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
Thread 1 waiting to be assigned a request
rad_recv: Access-Request packet from host 172.16.20.18:6001, id=1, length=65
Sending Access-Reject of id 1 to 172.16.20.18 port 6001
--- Walking the entire request list ---
Cleaning up request 0 ID 1 with timestamp 455489dd
Nothing to do.  Sleeping until we see a request.


Now what am I doing wrong?

Please any and all help is greatly appreciated


Cameron