EAP-TTLS problem at phase 1

Rafiqul Ahsan rafiqul.ahsan at gmail.com
Sat Oct 21 16:11:02 CEST 2006 

Dear Hoercher,

Thank you for your email. I noticed that too, however it didn't seem working
and it stopped with error even before that  with the following users entry :

"testuser" User-Password := "testuser"

the error was about no matching "anonymous_identity", and thats why I had to
have a DEFAULT entry after this with Auth-Type :=EAP.

Do you suggest any particular format of my users file ? Please note, the
phase 1 user identity is "anonymous_identity", and phase 2 user/passwd is
"testuser/testuser".

Below is my full debug out put. Please advise further ...

Rafi



# ./radiusd -X -A -f -s^M
Starting - reading configuration files ...^M
reread_config:  reading radiusd.conf^M
Config:   including file: /usr/local/etc/raddb/proxy.conf^M
Config:   including file: /usr/local/etc/raddb/clients.conf^M
Config:   including file: /usr/local/etc/raddb/snmp.conf^M
Config:   including file: /usr/local/etc/raddb/eap.conf^M
Config:   including file: /usr/local/etc/raddb/sql.conf^M
 main: prefix = "/usr/local"^M
 main: localstatedir = "/usr/local/var"^M
 main: logdir = "/usr/local/var/log/radius"^M
 main: libdir = "/usr/local/lib"^M
 main: radacctdir = "/usr/local/var/log/radius/radacct"^M
 main: hostname_lookups = no^M
 main: max_request_time = 30^M
 main: cleanup_delay = 4^M
 main: max_requests = 1024^M
 main: delete_blocked_requests = 0^M
 main: port = 0^M
 main: allow_core_dumps = no^M
 main: log_stripped_names = yes^M
 main: log_file = "/usr/local/var/log/radius/radius.log"^M
 main: log_auth = yes^M
 main: log_auth_badpass = yes^M
 main: log_auth_goodpass = yes^M
 main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"^M
 main: user = "(null)"^M
 main: group = "(null)"^M
 main: usercollide = no^M
 main: lower_user = "no"^M
 main: lower_pass = "no"^M
 main: nospace_user = "no"^M
 main: nospace_pass = "no"^M
 main: checkrad = "/usr/local/sbin/checkrad"^M
 main: proxy_requests = yes^M
 proxy: retry_delay = 5^M
 proxy: retry_count = 3^M
 proxy: synchronous = no^M
 proxy: default_fallback = yes^M
 proxy: dead_time = 120^M
 proxy: post_proxy_authorize = no^M
 proxy: wake_all_if_all_dead = no^M
 security: max_attributes = 20^M
 security: reject_delay = 2^M
 security: status_server = no^M
 main: debug_level = 0^M
read_config_files:  reading dictionary^M
read_config_files:  reading naslist^M
Using deprecated naslist file.  Support for this will go away soon.^M
read_config_files:  reading clients^M
read_config_files:  reading realms^M
radiusd:  entering modules setup^M
Module: Library search path is /usr/local/lib^M
Module: Loaded expr ^M
Module: Instantiated expr (expr) ^M
Module: Loaded PAP ^M
 pap: encryption_scheme = "crypt"^M
Module: Instantiated pap (pap) ^M
Module: Loaded DIGEST ^M
Module: Instantiated digest (digest) ^M
Module: Loaded eap ^M
 eap: default_eap_type = "ttls"^M
 eap: timer_expire = 60^M
 eap: ignore_unknown_eap_types = no^M
 eap: cisco_accounting_username_bug = no^M
rlm_eap: Loaded and initialized type md5^M
rlm_eap: Loaded and initialized type leap^M
 gtc: challenge = "Password: "^M
 gtc: auth_type = "PAP"^M
rlm_eap: Loaded and initialized type gtc^M
 tls: rsa_key_exchange = yes^M
 tls: dh_key_exchange = no^M
 tls: rsa_key_length = 1024^M
 tls: dh_key_length = 1024^M
 tls: verify_depth = 2^M
 tls: CA_path = "(null)"^M
 tls: pem_file_type = yes^M
 tls: private_key_file = "/etc/freeradius/etc/certs/key2.pem"^M
 tls: certificate_file = "/etc/freeradius/etc/certs/cert2.pem"^M
 tls: CA_file = "/etc/freeradius/etc/certs/cacert.pem"^M
 tls: private_key_password = "wimax i2 test certs"^M
 tls: dh_file = "/etc/freeradius/etc/certs/dh"^M
 tls: random_file = "/etc/freeradius/etc/certs/random"^M
 tls: fragment_size = 1024^M
 tls: include_length = yes^M
 tls: check_crl = no^M
 tls: check_cert_cn = "%{User-Name}"^M
 tls: cipher_list = "(null)"^M
 tls: check_cert_issuer = "(null)"^M
rlm_eap_tls: Loading the certificate file as a chain^M
rlm_eap: Loaded and initialized type tls^M
 ttls: default_eap_type = "mschapv2"^M
 ttls: copy_request_to_tunnel = no^M
 ttls: use_tunneled_reply = no^M
rlm_eap: Loaded and initialized type ttls^M
 peap: default_eap_type = "mschapv2"^M
 peap: copy_request_to_tunnel = no^M
 peap: use_tunneled_reply = no^M
 peap: proxy_tunneled_request_as_eap = yes^M
rlm_eap: Loaded and initialized type peap^M
 mschapv2: with_ntdomain_hack = no^M
rlm_eap: Loaded and initialized type mschapv2^M
Module: Instantiated eap (eap) ^M
Module: Loaded MS-CHAP ^M
 mschap: use_mppe = yes^M
 mschap: require_encryption = no^M
 mschap: require_strong = yes^M
 mschap: with_ntdomain_hack = no^M
 mschap: passwd = "(null)"^M
 mschap: ntlm_auth = "(null)"^M
Module: Instantiated mschap (mschap) ^M
Module: Loaded preprocess ^M
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"^M
 preprocess: hints = "/usr/local/etc/raddb/hints"^M
 preprocess: with_ascend_hack = no^M
 preprocess: ascend_channels_per_line = 23^M
 preprocess: with_ntdomain_hack = no^M
 preprocess: with_specialix_jetstream_hack = no^M
 preprocess: with_cisco_vsa_hack = no^M
 preprocess: with_alvarion_vsa_hack = no^M
Module: Instantiated preprocess (preprocess) ^M
Module: Loaded detail ^M
 detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"^M
 detail: detailperm = 384^M
 detail: dirperm = 493^M
 detail: locking = no^M
Module: Instantiated detail (auth_log) ^M
Module: Loaded CHAP ^M
Module: Instantiated chap (chap) ^M
Module: Loaded realm ^M
 realm: format = "suffix"^M
 realm: delimiter = "@"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmsuffix) ^M
 realm: format = "prefix"^M
 realm: delimiter = "/"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmslash) ^M
 realm: format = "prefix"^M
 realm: delimiter = "\"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmbackslash) ^M
 realm: format = "suffix"^M
 realm: delimiter = "%"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmpercent) ^M
Module: Loaded fastusers ^M
 fastusers: usersfile = "/usr/local/etc/raddb/users"^M
 fastusers: acctusersfile = "/usr/local/etc/raddb/acct_users"^M
 fastusers: hashsize = 1000^M
 fastusers: stats = no^M
 fastusers: compat = "no"^M
 fastusers: hash_reload = 5^M
 fastusers:  Reading /usr/local/etc/raddb/acct_users^M
 fastusers:  Reading /usr/local/etc/raddb/users^M
rlm_fastusers:  Loaded 1 users and 1 defaults^M
Module: Instantiated fastusers (fastusers) ^M
Module: Loaded Acct-Unique-Session-Id ^M
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port-Id"^M
Module: Instantiated acct_unique (acct_unique) ^M
 detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"^M
 detail: detailperm = 384^M
 detail: locking = no^M
Module: Instantiated detail (auth_log) ^M
Module: Loaded CHAP ^M
Module: Instantiated chap (chap) ^M
Module: Loaded realm ^M
 realm: format = "suffix"^M
 realm: delimiter = "@"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmsuffix) ^M
 realm: format = "prefix"^M
 realm: delimiter = "/"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmslash) ^M
 realm: format = "prefix"^M
 realm: delimiter = "\"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmbackslash) ^M
 realm: format = "suffix"^M
 realm: delimiter = "%"^M
 realm: ignore_default = no^M
 realm: ignore_null = no^M
Module: Instantiated realm (realmpercent) ^M
Module: Loaded fastusers ^M
 fastusers: usersfile = "/usr/local/etc/raddb/users"^M
 fastusers: acctusersfile = "/usr/local/etc/raddb/acct_users"^M
 fastusers: hashsize = 1000^M
 fastusers: stats = no^M
 fastusers: compat = "no"^M
 fastusers: hash_reload = 5^M
 fastusers:  Reading /usr/local/etc/raddb/acct_users^M
 fastusers:  Reading /usr/local/etc/raddb/users^M
rlm_fastusers:  Loaded 1 users and 1 defaults^M
Module: Instantiated fastusers (fastusers) ^M
Module: Loaded Acct-Unique-Session-Id ^M
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port-Id"^M
Module: Instantiated acct_unique (acct_unique) ^M
 detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"^M
 detail: detailperm = 384^M
 detail: dirperm = 493^M
 detail: locking = no^M
Module: Instantiated detail (detail) ^M
Module: Loaded radutmp ^M
 radutmp: filename = "/usr/local/var/log/radius/radutmp"^M
 radutmp: username = "%{User-Name}"^M
 radutmp: case_sensitive = yes^M
 radutmp: check_with_nas = yes^M
 radutmp: perm = 384^M
 radutmp: callerid = yes^M
Module: Instantiated radutmp (radutmp) ^M
 detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d"^M
 detail: detailperm = 384^M
 detail: dirperm = 493^M
radutmp: callerid = yes^M
Module: Instantiated radutmp (radutmp) ^M
 detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d"^M
 detail: detailperm = 384^M
 detail: dirperm = 493^M
 detail: locking = no^M
Module: Instantiated detail (reply_log) ^M
Listening on authentication *:1812^M
Listening on accounting *:1813^M
Ready to process requests.^M
rad_recv: Access-Request packet from host 192.168.1.102:19801, id=2,
length=133^M
        User-Name = "anonymous_identity"^M
        NAS-IP-Address = 192.168.1.102^M
        NAS-Port = 19801^M
        Service-Type = Login-User^M
        Called-Station-Id = "\313\026\344Q\000"^M
        Calling-Station-Id = "DU\224I\272("^M
        NAS-Identifier = "testuser"^M
        NAS-Port-Type = Wireless-Other^M
        EAP-Message = 0x0202001701616e6f6e796d6f75735f6964656e74697479^M
        Message-Authenticator = 0x1612b328a300f3a07fb104ea3b1b2b79^M
  Processing the authorize section of radiusd.conf^M
modcall: entering group authorize for request 0^M
  modcall[authorize]: module "preprocess" returns ok for request 0^M
radius_xlat:
'/usr/local/var/log/radius/radacct/192.168.1.102/auth-detail-20061020'^M
rlm_detail:
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
expands to /usr/local/var/log/ra
dius/radacct/192.168.1.102/auth-detail-20061020^M
  modcall[authorize]: module "auth_log" returns ok for request 0^M
  modcall[authorize]: module "chap" returns noop for request 0^M
  rlm_eap: EAP packet type response id 2 length 23^M
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation^M
  modcall[authorize]: module "eap" returns updated for request 0^M
  modcall[authorize]: module "mschap" returns noop for request 0^M
  modcall[authorize]: module "digest" returns noop for request 0^M
    rlm_realm: No '@' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmsuffix" returns noop for request 0^M
    rlm_realm: No '/' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmslash" returns noop for request 0^M
    rlm_realm: No '\' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmbackslash" returns noop for request 0^M
    rlm_realm: No '%' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmpercent" returns noop for request 0^M
rlm_fastusers:  Reloading fastusers hash^M
rlm_fastusers:  File /usr/local/etc/raddb/acct_users was unchanged. Not
reloading.^M
rlm_fastusers:  File /usr/local/etc/raddb/users was unchanged. Not
reloading.^M
rlm_fastusers:  checking defaults^M
  fastusers: Matched DEFAULT at 6^M
  modcall[authorize]: module "fastusers" returns updated for request 0^M
modcall: leaving group authorize (returns updated) for request 0^M
  rad_check_password:  Found Auth-Type EAP^M
auth: type "EAP"^M
  Processing the authenticate section of radiusd.conf^M
modcall: entering group authenticate for request 0^M
  rlm_eap: EAP Identity^M
  rlm_eap: processing type tls^M
  rlm_eap_tls: Initiate^M
  rlm_eap_tls: Start returned 1^M
  modcall[authenticate]: module "eap" returns handled for request 0^M
modcall: leaving group authenticate (returns handled) for request 0^M
Sending Access-Challenge of id 2 to 192.168.1.102 port 19801^M
        EAP-Message = 0x010300061520^M
        Message-Authenticator = 0x00000000000000000000000000000000^M
        State = 0xb6f4137eeccba240eb5fb35d9a7720fd^M
Finished request 0^M
Going to the next request^M
--- Walking the entire request list ---^M
Waking up in 5 seconds...^M
--- Walking the entire request list ---^M
Cleaning up request 0 ID 2 with timestamp 45394f82^M
Nothing to do.  Sleeping until we see a request.^M
rad_recv: Access-Request packet from host 192.168.1.102:19801, id=3,
length=218^M
        User-Name = "anonymous_identity"^M
        NAS-IP-Address = 192.168.1.102^M
        NAS-Port = 19801^M
        Service-Type = Login-User^M
        Called-Station-Id = "\313\026\344Q\000"^M
        Calling-Station-Id = "DU\224I\272("^M
        NAS-Identifier = "testuser"^M
        NAS-Port-Type = Wireless-Other^M
        EAP-Message =
0x0203006c150016030100610100005d03013d7b3c4fb8bbad3b5d5e3aab9cc3d3689c21b9c006cc4b1e77b3642e90d7
3ae200003600390038003500160013000a00330032002f000700660005000400630062006100150012000900650064006000140011000800060003
0100^M
        Message-Authenticator = 0x34960047891b107d3d82dda0a176d255^M
  Processing the authorize section of radiusd.conf^M
modcall: entering group authorize for request 1^M
  modcall[authorize]: module "preprocess" returns ok for request 1^M
radius_xlat:
'/usr/local/var/log/radius/radacct/192.168.1.102/auth-detail-20061020'^M
rlm_detail:
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
expands to /usr/local/var/log/ra
dius/radacct/192.168.1.102/auth-detail-20061020^M
  modcall[authorize]: module "auth_log" returns ok for request 1^M
  modcall[authorize]: module "chap" returns noop for request 1^M
  rlm_eap: EAP packet type response id 3 length 108^M
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation^M
  modcall[authorize]: module "eap" returns updated for request 1^M
  modcall[authorize]: module "mschap" returns noop for request 1^M
  modcall[authorize]: module "digest" returns noop for request 1^M
    rlm_realm: No '@' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmsuffix" returns noop for request 1^M
    rlm_realm: No '/' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmslash" returns noop for request 1^M
    rlm_realm: No '\' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmbackslash" returns noop for request 1^M
    rlm_realm: No '%' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmpercent" returns noop for request 1^M
rlm_fastusers:  Reloading fastusers hash^M
rlm_fastusers:  File /usr/local/etc/raddb/acct_users was unchanged. Not
reloading.^M
rlm_fastusers:  File /usr/local/etc/raddb/users was unchanged. Not
reloading.^M
rlm_fastusers:  checking defaults^M
  fastusers: Matched DEFAULT at 6^M
  modcall[authorize]: module "fastusers" returns updated for request 0^M
modcall: leaving group authorize (returns updated) for request 0^M
  rad_check_password:  Found Auth-Type EAP^M
auth: type "EAP"^M
  Processing the authenticate section of radiusd.conf^M
modcall: entering group authenticate for request 0^M
  rlm_eap: EAP Identity^M
  rlm_eap: processing type tls^M
  rlm_eap_tls: Initiate^M
  rlm_eap_tls: Start returned 1^M
  modcall[authenticate]: module "eap" returns handled for request 0^M
modcall: leaving group authenticate (returns handled) for request 0^M
Sending Access-Challenge of id 2 to 192.168.1.102 port 19801^M
        EAP-Message = 0x010300061520^M
        Message-Authenticator = 0x00000000000000000000000000000000^M
        State = 0xb6f4137eeccba240eb5fb35d9a7720fd^M
Finished request 0^M
Going to the next request^M
--- Walking the entire request list ---^M
Waking up in 5 seconds...^M
--- Walking the entire request list ---^M
Cleaning up request 0 ID 2 with timestamp 45394f82^M
Nothing to do.  Sleeping until we see a request.^M
rad_recv: Access-Request packet from host 192.168.1.102:19801, id=3,
length=218^M
        User-Name = "anonymous_identity"^M
        NAS-IP-Address = 192.168.1.102^M
        NAS-Port = 19801^M
        Service-Type = Login-User^M
        Called-Station-Id = "\313\026\344Q\000"^M
        Calling-Station-Id = "DU\224I\272("^M
        NAS-Identifier = "testuser"^M
        NAS-Port-Type = Wireless-Other^M
        EAP-Message =
0x0203006c150016030100610100005d03013d7b3c4fb8bbad3b5d5e3aab9cc3d3689c21b9c006cc4b1e77b3642e90d7
3ae200003600390038003500160013000a00330032002f000700660005000400630062006100150012000900650064006000140011000800060003
0100^M
        Message-Authenticator = 0x34960047891b107d3d82dda0a176d255^M
  Processing the authorize section of radiusd.conf^M
modcall: entering group authorize for request 1^M
  modcall[authorize]: module "preprocess" returns ok for request 1^M
radius_xlat:
'/usr/local/var/log/radius/radacct/192.168.1.102/auth-detail-20061020'^M
rlm_detail:
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
expands to /usr/local/var/log/ra
dius/radacct/192.168.1.102/auth-detail-20061020^M
  modcall[authorize]: module "auth_log" returns ok for request 1^M
  modcall[authorize]: module "chap" returns noop for request 1^M
  rlm_eap: EAP packet type response id 3 length 108^M
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation^M
  modcall[authorize]: module "eap" returns updated for request 1^M
 modcall[authorize]: module "eap" returns updated for request 1^M
  modcall[authorize]: module "mschap" returns noop for request 1^M
  modcall[authorize]: module "digest" returns noop for request 1^M
    rlm_realm: No '@' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmsuffix" returns noop for request 1^M
    rlm_realm: No '/' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmslash" returns noop for request 1^M
    rlm_realm: No '\' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmbackslash" returns noop for request 1^M
    rlm_realm: No '%' in User-Name = "anonymous_identity", looking up realm
NULL^M
    rlm_realm: No such realm "NULL"^M
  modcall[authorize]: module "realmpercent" returns noop for request 1^M
rlm_fastusers:  Reloading fastusers hash^M
rlm_fastusers:  File /usr/local/etc/raddb/acct_users was unchanged. Not
reloading.^M
rlm_fastusers:  File /usr/local/etc/raddb/users was unchanged. Not
reloading.^M
rlm_fastusers:  checking defaults^M
  fastusers: Matched DEFAULT at 6^M
  modcall[authorize]: module "fastusers" returns updated for request 1^M
modcall: leaving group authorize (returns updated) for request 1^M
  rad_check_password:  Found Auth-Type EAP^M
auth: type "EAP"^M
  Processing the authenticate section of radiusd.conf^M
modcall: entering group authenticate for request 1^M
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown
EAP-request^M
  rlm_eap: Failed in handler^M
  modcall[authenticate]: module "eap" returns invalid for request 1^M
modcall: leaving group authenticate (returns invalid) for request 1^M
auth: Failed to validate the user.^M
Login incorrect: [anonymous_identity/<no User-Password attribute>] (from
client 192.168.1.102 port 19801 cli DU?I\272(
)^M
Delaying request 1 for 2 seconds^M
Finished request 1^M
Going to the next request^M
--- Walking the entire request list ---^M
Waking up in 2 seconds...^M
--- Walking the entire request list ---^M
Waking up in 2 seconds...^M
--- Walking the entire request list ---^M
Sending Access-Reject of id 3 to 192.168.1.102 port 19801^M
Waking up in 1 seconds...^M
--- Walking the entire request list ---^M
Cleaning up request 1 ID 3 with timestamp 45394f9b^M
Nothing to do.  Sleeping until we see a request.^M
exit^M




On 10/21/06, K. Hoercher <wbhoer at gmail.com> wrote:
>
> Hi,
>
> as mentioned in various places in the documentation and countless
> times on this list:
>
> On 10/21/06, Rafiqul Ahsan <rafiqul.ahsan at gmail.com> wrote:
>
> > Here is my users file :
> >
> > "testuser" Auth-Type := EAP, User-Password := "testuser"
> >
> >
> > DEFAULT Auth-Type := EAP
>
> Dont't set Auth-Type
>
>
> > Here is the radius log (only shown the failed part)
> >
> > rlm_fastusers:  checking defaults^M
> >   fastusers: Matched DEFAULT at 6^M
> >   modcall[authorize]: module "fastusers" returns updated for request 1^M
> > modcall: leaving group authorize (returns updated) for request 1^M
> >   rad_check_password:  Found Auth-Type EAP^M
> > auth: type "EAP"^M
> >   Processing the authenticate section of radiusd.conf^M
> > modcall: entering group authenticate for request 1^M
> >  rlm_eap: Either EAP-request timed out OR EAP-response to an unknown
> > EAP-request^M
> >   rlm_eap: Failed in handler^M
> >   modcall[authenticate]: module "eap" returns invalid for request 1^M
> > modcall: leaving group authenticate (returns invalid) for request 1^M
>
> Thats pretty much non-informative. In case, the above fix does not yet
> yield the desired results, provide the full debug output.
>
> regards
> K. Hoercher
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-- 
Rafiqul Ahsan                630-717-1698(h)
2120 Periwinkle Ln         630-689-1457(h)
Naperville, IL 60540        847-812-6176(c)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20061021/96b3bc5d/attachment.html>

More information about the Freeradius-Users mailing list