Different Groups

[Norman Zhang]

tnt at kalik.co.yu wrote:
> Yes. Use NAS-IP-Address as check item. If you need a list of groups
> and/or users/callerIDs/etc. that are allowed then use a huntgroup.

I added the following lines to huntgroup.

fw-pix		NAS-IP-Address == 10.0.0.1
fw-pix		NAS-IP-Address == 10.0.0.2

fw-pix-group	NAS-IP-Address == 10.0.0.1
		User-Name = fw-admin,
		Group = fw-group

However, I'm getting the following error. Could someone please give me 
few pointers?

Norman

---

Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 5 ID 25 with timestamp 46362f79
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 26 to 10.0.0.1:1812
         Cisco-AVPair = "shell:priv-lvl=1"
Waking up in 4 seconds...
rad_recv: Access-Request packet from host 10.0.0.1:1812, id=27, length=109
         User-Name = "fw-admin"
         NAS-IP-Address = 10.0.0.1
         Calling-Station-Id = "10.0.0.3"
         User-Password = "\025\372\202`\370RE\005\327\231^\200\303\353"
         NAS-Port = 27
         Cisco-AVPair = "ip:source-ip=10.0.0.3"
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
   modcall[authorize]: module "preprocess" returns ok for request 7
   modcall[authorize]: module "chap" returns noop for request 7
   modcall[authorize]: module "mschap" returns noop for request 7
     rlm_realm: No '@' in User-Name = "fw-admin", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 7
   rlm_eap: No EAP-Message, not doing EAP
   modcall[authorize]: module "eap" returns noop for request 7
     users: Matched DEFAULT at 152
   modcall[authorize]: module "files" returns ok for request 7
modcall: group authorize returns ok for request 7
   rad_check_password:  Found Auth-Type System
auth: type "System"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_unix: [fw-admin]: invalid password
   modcall[authenticate]: module "unix" returns reject for request 7
modcall: group authenticate returns reject for request 7
auth: Failed to validate the user.
Login incorrect: [fw-admin] (from client pix-network port 27 cli 10.0.0.3)
   WARNING: Unprintable characters in the password. ?  Double-check the 
shared secret on the server and the NAS!
Delaying request 7 for 1 seconds
Finished request 7
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 6 ID 26 with timestamp 46362f7e
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 27 to 10.0.0.1:1812
         Cisco-AVPair = "shell:priv-lvl=1"
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 7 ID 27 with timestamp 46362f83
Nothing to do.  Sleeping until we see a request.