EAP-MD5client"rlm_eap_md5 : Password is required for EAP-MD5 Authentication...

[rick norman]

> ----- Original Message -----
> From: tnt at kalik.co.yu
> To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
> Subject: Re: EAP-MD5client"rlm_eap_md5 : Password is required for EAP-MD5	Authentication...
> Date: Mon, 06 Aug 2007 00:39:26 +0100
> 
> 
> Use cleartext password:
> 
> con_d   Cleartext-Password:="con_d"
> 
Okay, I tried Cleartext-Password as well as ==.
Still fails.

 Following is the new complete output from radiusd -X for this session.


--------------------------------------------------------------------------------

rad_recv: Access-Request packet from host 127.0.0.1:57360, id=184, length=63
         User-Name = "con_d"
         NAS-Identifier = "rick"
         Message-Authenticator = 0x5f4c08498fcee5d8497d0a1ec083a4d0
         EAP-Message = 0x0200000a01636f6e5f64
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
   modcall[authorize]: module "preprocess" returns ok for request 0
   modcall[authorize]: module "chap" returns noop for request 0
   modcall[authorize]: module "mschap" returns noop for request 0
     rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 0
   rlm_eap: EAP packet type response id 0 length 10
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 0
     users: Matched entry con_d at line 138
   modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
   rlm_eap: EAP Identity
   rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
   modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 184 to 127.0.0.1 port 57360
         EAP-Message = 0x010100160410e18639eeac9b901b1e0bd3444aca06f2
         Message-Authenticator = 0x00000000000000000000000000000000
         State = 0x6b43db4b270e35f227bf224ccd168b04
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:57360, id=185, length=93
         User-Name = "con_d"
         NAS-Identifier = "rick"
         State = 0x6b43db4b270e35f227bf224ccd168b04
         Message-Authenticator = 0xca15f35d9c82f222c56e62e34928f6f1
         EAP-Message = 0x02010016041037ab0f881c1fa98e477b0a5ad546b160
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
   modcall[authorize]: module "preprocess" returns ok for request 1
   modcall[authorize]: module "chap" returns noop for request 1
   modcall[authorize]: module "mschap" returns noop for request 1
     rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 1
   rlm_eap: EAP packet type response id 1 length 22
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 1
     users: Matched entry con_d at line 138
   modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/md5
   rlm_eap: processing type md5
rlm_eap_md5: User-Password is required for EAP-MD5 authentication
  rlm_eap: Handler failed in EAP/md5
   rlm_eap: Failed in EAP select
   modcall[authenticate]: module "eap" returns invalid for request 1
modcall: leaving group authenticate (returns invalid) for request 1
auth: Failed to validate the user.
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 184 with timestamp 46b647b8
Sending Access-Reject of id 185 to 127.0.0.1 port 57360
         EAP-Message = 0x04010004
         Message-Authenticator = 0x00000000000000000000000000000000
Cleaning up request 1 ID 185 with timestamp 46b647b8
Nothing to do.  Sleeping until we see a request.

 





-- 
_______________________________________________
Get your free email from http://bsdmail.com