EAP-MD5client"rlm_eap_md5 : Password is required for EAP-MD5Authentication...

[tnt at kalik.co.yu]

Send a (PAP) request with radtest. Does that work?

Ivan Kalik
Kalik Informatika ISP


Dana 6/8/2007, "rick norman" <gumbo_2007 at bsdmail.com> piše:

>I'm using freeradius version1.1.0_2 on freebsd 6.1.
>The radius client is running locally and talks to radiusd through
>loopback.
>The users file in raddb contains the line
>
>con_d User-Password == con_d 
>Following is radiusd -X output.  I don't understand the failure.
>
>rad_recv: Access-Request packet from host 127.0.0.1:56788, id=190, length=63
>         User-Name = "con_d"
>         NAS-Identifier = "rick"
>         Message-Authenticator = 0x8427e9ce00df09446ca9130a3ade1de8
>         EAP-Message = 0x0200000a01636f6e5f64
>   Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
>   modcall[authorize]: module "preprocess" returns ok for request 0
>   modcall[authorize]: module "chap" returns noop for request 0
>   modcall[authorize]: module "mschap" returns noop for request 0
>     rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL
>     rlm_realm: No such realm "NULL"
>   modcall[authorize]: module "suffix" returns noop for request 0
>   rlm_eap: EAP packet type response id 0 length 10
>   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>   modcall[authorize]: module "eap" returns updated for request 0
>     users: Matched entry con_d at line 138
>   modcall[authorize]: module "files" returns ok for request 0
>modcall: leaving group authorize (returns updated) for request 0
>   rad_check_password:  Found Auth-Type EAP
>auth: type "EAP"
>   Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 0
>   rlm_eap: EAP Identity
>   rlm_eap: processing type md5
>rlm_eap_md5: Issuing Challenge
>   modcall[authenticate]: module "eap" returns handled for request 0
>modcall: leaving group authenticate (returns handled) for request 0
>Sending Access-Challenge of id 190 to 127.0.0.1 port 56788
>         EAP-Message = 0x010100160410223177b20b1d22da8c79e2c0a8562196
>         Message-Authenticator = 0x00000000000000000000000000000000
>         State = 0x93fe786c1b3d77b98c0e87dc406bbd88
>Finished request 0
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 6 seconds...
>rad_recv: Access-Request packet from host 127.0.0.1:56788, id=191, length=93
>         User-Name = "con_d"
>         NAS-Identifier = "rick"
>         State = 0x93fe786c1b3d77b98c0e87dc406bbd88
>         Message-Authenticator = 0xf3b427506614646b12ec161a2be00033
>         EAP-Message = 0x02010016041037ab0f881c1fa98e477b0a5ad546b160
>   Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 1
>   modcall[authorize]: module "preprocess" returns ok for request 1
>   modcall[authorize]: module "chap" returns noop for request 1
>   modcall[authorize]: module "mschap" returns noop for request 1
>     rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL
>     rlm_realm: No such realm "NULL"
>   modcall[authorize]: module "suffix" returns noop for request 1
>   rlm_eap: EAP packet type response id 1 length 22
>   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>   modcall[authorize]: module "eap" returns updated for request 1
>     users: Matched entry con_d at line 138
>   modcall[authorize]: module "files" returns ok for request 1
>modcall: leaving group authorize (returns updated) for request 1
>   rad_check_password:  Found Auth-Type EAP
>auth: type "EAP"
>   Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 1
>   rlm_eap: Request found, released from the list
>   rlm_eap: EAP/md5
>   rlm_eap: processing type md5
>   rlm_eap: Freeing handler
>   modcall[authenticate]: module "eap" returns reject for request 1
>modcall: leaving group authenticate (returns reject) for request 1
>auth: Failed to validate the user.
>Delaying request 1 for 1 seconds
>Finished request 1
>Going to the next request
>Waking up in 6 seconds...
>--- Walking the entire request list ---
>Cleaning up request 0 ID 190 with timestamp 46b76f06
>Sending Access-Reject of id 191 to 127.0.0.1 port 56788
>         EAP-Message = 0x04010004
>         Message-Authenticator = 0x00000000000000000000000000000000
>Cleaning up request 1 ID 191 with timestamp 46b76f06
>Nothing to do.  Sleeping until we see a request.
>
>
>-- 
>_______________________________________________
>Get your free email from http://bsdmail.com
>
>