Authenticate users from 3 realms in one MySQL database
Scott Lambert
lambert at lambertfam.org
Tue Aug 14 06:48:06 CEST 2007
I am attempting to build a setup which authenticates users from 3 realms
in one MySQL database. Some of my users, actually a large proportion of
them, are currently not using their realm to authenticate. I am about
to merge the dial pools so I won't be able to use huntgroups or hints to
figure out which realm they are coming from.
I am trying to use the new unlang option to avoid writing an rlm_perl
type script.
FreeRADIUS-snapshot-20070813
I don't know if any of this is "legal". I'm using one sql module. I
just call it once for each realm after changing the %{User-Name} to
append that realm. It just looked like it might work so I tried it.
The debug output makes it look like I am very close. I haven't been
able to figure out exactly what is wrong with it, yet.
The failure happens in rlm_pap when the user does not specify a realm.
I don't see the cause of the failure in the debug output. I'm probably
not interpreting the output correctly.
Here are the diffs to the default config coming from the snapshot.
--------------------------------------------------------------------
--- radiusd.conf-orig Mon Aug 13 20:42:25 2007
+++ radiusd.conf Mon Aug 13 21:15:41 2007
@@ -210,7 +210,7 @@
# Allowed values are:
# integer port number (1812)
# 0 means "use /etc/services for the proper port"
- port = 0
+ port = 1645
# Type of packets to listen for.
# Allowed values are:
@@ -252,7 +252,7 @@
listen {
ipaddr = *
# ipv6addr = ::
- port = 0
+ port = 1646
type = acct
# interface = eth0
# clients = per_socket_clients
@@ -1051,7 +1051,7 @@
#
# If you're not running a Cisco or Quintum NAS, you don't
# need this hack.
- with_cisco_vsa_hack = no
+ with_cisco_vsa_hack = yes
}
# Livingston-style 'users' file
@@ -1214,33 +1214,33 @@
#
# See rlm_sql_log(5) manpage.
#
-# sql_log {
-# path = ${radacctdir}/sql-relay
-# acct_table = "radacct"
-# postauth_table = "radpostauth"
-#
-# Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '%S', '0', '0', '');"
-# Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \
-# '%{Acct-Terminate-Cause}');"
-# Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');"
-#
-# Post-Auth = "INSERT INTO ${postauth_table} \
-# (user, pass, reply, date) VALUES \
-# ('%{User-Name}', '%{User-Password:-Chap-Password}', \
-# '%{reply:Packet-Type}', '%S');"
-# }
+ sql_log {
+ path = ${radacctdir}/sql-relay
+ acct_table = "radacct"
+ postauth_table = "radpostauth"
+
+ Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
+ NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
+ AcctSessionTime, AcctTerminateCause) VALUES \
+ ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
+ '%{Framed-IP-Address}', '%S', '0', '0', '');"
+ Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
+ NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
+ AcctSessionTime, AcctTerminateCause) VALUES \
+ ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
+ '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \
+ '%{Acct-Terminate-Cause}');"
+ Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
+ NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
+ AcctSessionTime, AcctTerminateCause) VALUES \
+ ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
+ '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');"
+
+ Post-Auth = "INSERT INTO ${postauth_table} \
+ (user, pass, reply, date) VALUES \
+ ('%{User-Name}', '%{User-Password:-Chap-Password}', \
+ '%{reply:Packet-Type}', '%S');"
+ }
#
# Create a unique accounting session Id. Many NASes re-use
--- default-orig Mon Aug 13 21:00:10 2007
+++ default Tue Aug 14 03:30:23 2007
@@ -122,7 +122,56 @@
# is meant to mirror the "users" file.
#
# See "Authorization Queries" in sql.conf
-# sql
+ if ( "%{User-Name}" =~ /@/) {
+ sql
+ }
+ else {
+ update request {
+ Stripped-User-Name := "%{User-Name}"
+ User-Name := "%{User-Name}@example1.net"
+ }
+ sql {
+ fail = 1
+ notfound = 2
+ noop = return
+ ok = return
+ updated = return
+ reject = return
+ userlock = return
+ invalid = return
+ handled = return
+ }
+ update request {
+ User-Name := "%{Stripped-User-Name}@example2.com"
+ }
+ sql {
+ fail = 1
+ notfound = 2
+ noop = return
+ ok = return
+ updated = return
+ reject = return
+ userlock = return
+ invalid = return
+ handled = return
+ }
+ update request {
+ User-Name := "%{Stripped-User-Name}@example3.net"
+ }
+ sql {
+ fail = 1
+ notfound = 2
+ noop = return
+ ok = return
+ updated = return
+ reject = return
+ userlock = return
+ invalid = return
+ handled = return
+ }
+ }
+
+
#
# If you are using /etc/smbpasswd, and are also doing
@@ -312,7 +361,7 @@
# Log traffic to an SQL database.
#
# See "Accounting queries" in sql.conf
-# sql
+ sql
#
# Instead of sending the query to the SQL server,
@@ -339,11 +388,11 @@
# or rlm_sql module can handle this.
# The rlm_sql module is *much* faster
session {
- radutmp
+# radutmp
#
# See "Simultaneous Use Checking Queries" in sql.conf
-# sql
+ sql
}
@@ -364,7 +413,7 @@
# After authenticating the user, do another SQL query.
#
# See "Authentication Logging Queries" in sql.conf
-# sql
+ sql
#
# Instead of sending the query to the SQL server,
--------------------------------------------------------------------
Here are the authentication tests.
lambert at sysmon ~
22:30:33 Mon Aug 13 $ radtest lambert at example3.net password1 radtest.example1.net 2 blahblah 2
Sending Access-Request of id 82 to radtest.example1.net port 1645
User-Name = "lambert at example3.net"
User-Password = "password1"
NAS-IP-Address = 255.255.255.255
NAS-Port = 2
Framed-Protocol = PPP
rad_recv: Access-Accept packet from host radtest.example1.net:1645, id=82, length=32
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
lambert at sysmon ~
22:33:43 Mon Aug 13 $ radtest lambert password1 radtest.example1.net 2 blahblah 2
Sending Access-Request of id 99 to radtest.example1.net port 1645
User-Name = "lambert"
User-Password = "password1"
NAS-IP-Address = 255.255.255.255
NAS-Port = 2
Framed-Protocol = PPP
rad_recv: Access-Reject packet from host radtest.example1.net:1645, id=99, length=20
--------------------------------------------------------------------
And here is the output from "/usr/local/sbin/radiusd -X":
Script started on Tue Aug 14 03:33:25 2007
root at radtest.example1.net /usr/local/etc/raddb
03:33:25 Tue Aug 14 # /usr/local/sbin/radiusd -X
FreeRADIUS Version 2.0.0-pre2, for host i386-unknown-freebsd6.2, built on Aug 13 2007 at 19:41:31
Copyright (C) 2000-2007 The FreeRADIUS server project.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
Config: including file: /usr/local/etc/raddb/radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
Config: including file: /usr/local/etc/raddb/sql/mysql/dialup.conf
Config: including file: /usr/local/etc/raddb/sql/mysql/counter.conf
Config: including files in directory: /usr/local/etc/raddb/sites-enabled/
Config: including file: /usr/local/etc/raddb/sites-enabled/default
Starting - reading configuration files ...
read_config_files: reading dictionary
main {
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/usr/local/var/log/radius"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
snmp = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
log_stripped_names = no
log_file = "/usr/local/var/log/radius/radius.log"
log_auth = no
log_auth_badpass = no
log_auth_goodpass = no
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
syslog_facility = "daemon"
}
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
home_server localhost {
ipaddr = 127.0.0.1 IP address [127.0.0.1]
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_check = "none"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
listen {
type = "auth"
ipaddr = *
port = 1645
client 127.0.0.1 {
secret = "testing123"
shortname = "localhost"
nastype = "other"
}
}
listen {
type = "acct"
ipaddr = *
port = 1646
}
radiusd: entering modules setup
radiusd: Library search path is /usr/local/lib
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = yes
input_pairs = "request"
shell_escape = yes
}
rlm_exec: wait=yes but no output defined. Did you mean output=none?
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
}
eap: Linked to sub-module rlm_eap_md5
eap: Instantiating eap-md5
eap: Linked to sub-module rlm_eap_leap
eap: Instantiating eap-leap
eap: Linked to sub-module rlm_eap_gtc
eap: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
eap: Linked to sub-module rlm_eap_tls
eap: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
}
rlm_eap_tls: Loading the certificate file as a chain
eap: Linked to sub-module rlm_eap_ttls
eap: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
}
eap: Linked to sub-module rlm_eap_peap
eap: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
}
eap: Linked to sub-module rlm_eap_mschapv2
eap: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = yes
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
Module: Linked to module rlm_sql
Module: Instantiating sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = ""
login = "radius"
password = "kic7ops83"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
readclients = yes
deletestalesessions = yes
num_sql_socks = 5
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctsessiontime = 0 AND acctstoptime = 0 AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'"
accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawo!
rds}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Fra!
med-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gi!
gawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime = 0"
postauth_query = "INSERT INTO radpostauth (user, pass, reply, date) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret FROM nas
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Read entry nasname=sysmon.example1.net,shortname=sysmon,secret=blahblah
rlm_sql (sql): Adding client xx.xy.yz.w (sysmon) to clients list
rlm_sql (sql): Released sql socket id: 4
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
}
}
Initializing the thread pool...
Listening on authentication address * port 1645
Listening on accounting address * port 1646
Listening on proxy address * port 1647
Ready to process requests.
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host xx.xy.yz.w port 1131, id=82, length=75
User-Name = "lambert at example3.net"
User-Password = "password1"
NAS-IP-Address = 255.255.255.255
NAS-Port = 2
Framed-Protocol = PPP
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
rlm_realm: Looking up realm "example3.net" for User-Name = "lambert at example3.net"
rlm_realm: No such realm "example3.net"
++[suffix] returns noop
rlm_eap: No EAP-Message, not doing EAP
++[eap] returns noop
users: Matched entry DEFAULT at line 172
++[files] returns ok
++? if ("%{User-Name}" =~ /@/)
expand: %{User-Name} -> lambert at example3.net
? Evaluating ("%{User-Name}" =~ /@/) -> TRUE
++? if ("%{User-Name}" =~ /@/) -> TRUE
++- entering if ("%{User-Name}" =~ /@/)
expand: %{User-Name} -> lambert at example3.net
rlm_sql (sql): sql_set_user escaped user --> 'lambert at example3.net'
rlm_sql (sql): Reserving sql socket id: 3
expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lambert at example3.net' ORDER BY id
rlm_sql (sql): User found in radcheck table
expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lambert at example3.net' ORDER BY id
expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'lambert at example3.net' ORDER BY priority
expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id
rlm_sql (sql): User found in group dialup
expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id
rlm_sql (sql): Released sql socket id: 3
+++[sql] returns ok
++- if ("%{User-Name}" =~ /@/) returns ok
++ ... skipping else for request 0: Preceding "if" was taken
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
rad_check_password: Found Auth-Type
auth: type "PAP"
+- entering group PAP
rlm_pap: login attempt with password password1
rlm_pap: Using clear text password.
rlm_pap: User authenticated successfully
++[pap] returns ok
+- entering group post-auth
rlm_sql (sql): Processing sql_postauth
expand: %{User-Name} -> lambert at example3.net
rlm_sql (sql): sql_set_user escaped user --> 'lambert at example3.net'
expand: %{User-Password} -> password1
expand: INSERT INTO radpostauth (user, pass, reply, date) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (user, pass, reply, date) VALUES ( 'lambert at example3.net', 'password1', 'Access-Accept', '2007-08-14 03:33:43')
rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (user, pass, reply, date) VALUES ( 'lambert at example3.net', 'password1', 'Access-Accept', '2007-08-14 03:33:43')
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql (sql): Released sql socket id: 2
++[sql] returns ok
Sending Access-Accept of id 82 to xx.xy.yz.w port 1131
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0 state 5
Going to the next request
Waking up in 4 seconds...
Cleaning up request 0 ID 82 with timestamp +15
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host xx.xy.yz.w port 3307, id=99, length=65
User-Name = "lambert"
User-Password = "password1"
NAS-IP-Address = 255.255.255.255
NAS-Port = 2
Framed-Protocol = PPP
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[unix] returns updated
rlm_realm: No '@' in User-Name = "lambert", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: No EAP-Message, not doing EAP
++[eap] returns noop
users: Matched entry DEFAULT at line 172
++[files] returns ok
++? if ("%{User-Name}" =~ /@/)
expand: %{User-Name} -> lambert
? Evaluating ("%{User-Name}" =~ /@/) -> FALSE
++? if ("%{User-Name}" =~ /@/) -> FALSE
++- entering else
expand: %{User-Name} -> lambert
expand: %{User-Name}@example1.net -> lambert at example1.net
+++[request] returns ok
expand: %{User-Name} -> lambert at example1.net
rlm_sql (sql): sql_set_user escaped user --> 'lambert at example1.net'
rlm_sql (sql): Reserving sql socket id: 1
expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lambert at example1.net' ORDER BY id
expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'lambert at example1.net' ORDER BY priority
rlm_sql (sql): Released sql socket id: 1
rlm_sql (sql): User lambert at example1.net not found
+++[sql] returns notfound
expand: %{Stripped-User-Name}@example2.com -> lambert at example2.com
+++[request] returns notfound
expand: %{User-Name} -> lambert at example2.com
rlm_sql (sql): sql_set_user escaped user --> 'lambert at example2.com'
rlm_sql (sql): Reserving sql socket id: 0
expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lambert at example2.com' ORDER BY id
expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'lambert at example2.com' ORDER BY priority
rlm_sql (sql): Released sql socket id: 0
rlm_sql (sql): User lambert at example2.com not found
+++[sql] returns notfound
expand: %{Stripped-User-Name}@example3.net -> lambert at example3.net
+++[request] returns notfound
expand: %{User-Name} -> lambert at example3.net
rlm_sql (sql): sql_set_user escaped user --> 'lambert at example3.net'
rlm_sql (sql): Reserving sql socket id: 4
expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lambert at example3.net' ORDER BY id
rlm_sql (sql): User found in radcheck table
expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lambert at example3.net' ORDER BY id
expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'lambert at example3.net' ORDER BY priority
expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dialup' ORDER BY id
rlm_sql (sql): User found in group dialup
expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dialup' ORDER BY id
rlm_sql (sql): Released sql socket id: 4
+++[sql] returns ok
++- else returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
rad_check_password: Found Auth-Type
auth: type "PAP"
+- entering group PAP
rlm_pap: login attempt with password password1
rlm_pap: Using CRYPT encryption.
rlm_pap: Passwords don't match
++[pap] returns reject
auth: Failed to validate the user.
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} -> lambert at example3.net
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 1 for 1 seconds
Going to the next request
Sending delayed reject for request 1
Sending Access-Reject of id 99 to xx.xy.yz.w port 3307
Waking up in 4 seconds...
Cleaning up request 1 ID 99 with timestamp +27
Nothing to do. Sleeping until we see a request.
root at radtest.example1.net /usr/local/etc/raddb
03:38:22 Tue Aug 14 # exit
exit
Script done on Tue Aug 14 03:38:25 2007
--
Scott Lambert KC5MLE Unix SysAdmin
lambert at lambertfam.org
More information about the Freeradius-Users
mailing list