HELP! testuser works, but local unix user dosn't! - WPA/WPA2 PEAP

[Kristian Junkov]

Hi,

I use freeradius 1.1.7, and my client pc runs windows Vista.
I've set up a testuser with a clear-text password in the users file - which
works:-). I can connect using the testuser with WPA/WPA2, PEAP, TTLS without
problems.

But when I try to connect using the local unix users it dosnt work:-((, what
am I doing wrong?

This is what i got when running in debug -X mode, and trying with root:
########## The user request #############
rad_recv: Access-Request packet from host 172.16.20.240:2056, id=0,
length=121
        User-Name = "root"
        NAS-IP-Address = 172.16.20.240
        Called-Station-Id = "000001a728a8"
        Calling-Station-Id = "0013e8c11ed3"
        NAS-Identifier = "000001a728a8"
        NAS-Port = 12
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x0200000901726f6f74
        Message-Authenticator = 0x626a6cc69ca1f0b92f795e2542e86be3
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "root", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 0 length 9
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    users: Matched entry DEFAULT at line 159
  modcall[authorize]: module "files" returns ok for request 0
rlm_pap: WARNING! No "known good" password found for the user. 
Authentication may fail because of this.
  modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 0 to 172.16.20.240 port 2056
        EAP-Message = 0x01010016041054c071964fb44c8680fbb4110fcb766c
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x06737742f028b5011a4eecca9b8e7047
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 475b3805
Nothing to do.  Sleeping until we see a request.


This is my configuration from debug mode:
loki:/etc/freeradius# freeradius -X -A -y
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc/freeradius/proxy.conf
Config:   including file: /etc/freeradius/clients.conf
Config:   including file: /etc/freeradius/snmp.conf
Config:   including file: /etc/freeradius/eap.conf
Config:   including file: /etc/freeradius/sql.conf
 main: prefix = "/usr"
 main: localstatedir = "/var"
 main: logdir = "/var/log/freeradius"
 main: libdir = "/usr/lib/freeradius"
 main: radacctdir = "/var/log/freeradius/radacct"
 main: hostname_lookups = no
 main: snmp = no
 main: max_request_time = 60
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/freeradius/radius.log"
 main: log_auth = yes
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/freeradius/freeradius.pid"
 main: user = "freerad"
 main: group = "freerad"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
 pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = yes
 mschap: require_strong = yes
 mschap: with_ntdomain_hack = yes
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "/etc/passwd"
 unix: shadow = "/etc/shadow"
 unix: group = "/etc/group"
 unix: radwtmp = "/var/log/freeradius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 tls: rsa_key_exchange = no
 tls: dh_key_exchange = yes
 tls: rsa_key_length = 512
 tls: dh_key_length = 512
 tls: verify_depth = 0
 tls: CA_path = "(null)"
 tls: pem_file_type = yes
 tls: private_key_file = "/etc/freeradius/certs/wireless/server_key.pem"
 tls: certificate_file = "/etc/freeradius/certs/wireless/server_cert.pem"
 tls: CA_file = "/etc/freeradius/certs/wireless/CA/cacert.pem"
 tls: private_key_password = "xxxxxxxx"
 tls: dh_file = "/etc/freeradius/certs/wireless/dh"
 tls: random_file = "/etc/freeradius/certs/wireless/random"
 tls: fragment_size = 1024
 tls: include_length = yes
 tls: check_crl = no
 tls: check_cert_cn = "(null)"
 tls: cipher_list = "(null)"
 tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
 ttls: default_eap_type = "md5"
 ttls: copy_request_to_tunnel = no
 ttls: use_tunneled_reply = no
rlm_eap: Loaded and initialized type ttls
 peap: default_eap_type = "mschapv2"
 peap: copy_request_to_tunnel = no
 peap: use_tunneled_reply = no
 peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/etc/freeradius/huntgroups"
 preprocess: hints = "/etc/freeradius/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
 preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
 files: usersfile = "/etc/freeradius/users"
 files: acctusersfile = "/etc/freeradius/acct_users"
 files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
 detail: detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/var/log/freeradius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
-----------------------------------

Thanks,
Kristian
-- 
View this message in context: http://www.nabble.com/HELP%21-testuser-works%2C-but-local-unix-user-dosn%27t%21---WPA-WPA2-PEAP-tp14234434p14234434.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.