VLAN assigment and Alcatel Omniswitch 7800

Gaddis, Jeremy L. jeremy at linuxwiz.net
Fri Feb 9 05:02:23 CET 2007


On Thu, 8 Feb 2007, Oxiel Contreras wrote:
> The Access-Accept part of radiusd -X is now sending the switch the correct
> information:
>
> modcall[authenticate]: module "eap" returns ok for request 8
> modcall: leaving group authenticate (returns ok) for request 8
> Sending Access-Accept of id 1 to 192.168.10.20 port 1068
>        Tunnel-Type:0 += VLAN
>        Tunnel-Medium-Type:0 += IEEE-802
>        Tunnel-Private-Group-Id:0 += "3"
>        MS-MPPE-Recv-Key =
> 0x2c003c698c883936e741aeed8974f40eb012d38af20400bdd0815dac46dc2e0b
>        MS-MPPE-Send-Key =
> 0x92807250a6760157aa6a39f9a05239c3d28bce8c5b7dc3563bd2ddc7cae2893e
>        EAP-Message = 0x030a0004
>        Message-Authenticator = 0x00000000000000000000000000000000
>        User-Name = "MYDOMAIN\\jose"
> Finished request 8
>
> But still the VLAN is not assigned, what else can it be ?

Have you checked the documentation for the Omniswitch to verify that it 
supports this?  If I send back the same attributes on my wireless access 
points, it works perfectly (we do this in production).  The AP's, however, 
support that.

-j

-- 
Jeremy L. Gaddis, MCP, GCWN             jeremy at linuxwiz.net
LinuxWiz Consulting                     http://linuxwiz.net





More information about the Freeradius-Users mailing list