Segmentation fault (core dumped) - freeradius-1.1.4
adreas Polyxronopoulos
apolyxrono at yahoo.co.uk
Mon Feb 12 15:27:23 CET 2007
Hi list,
I use freeradius 1.1.4 and I face the following problem. Freeradius runs ok but whenever a user tries to connect to the network freeradius crashes and I get the following message.
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: bind_address = 150.140.188.218 IP address [150.140.188.218]
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = no
mschap: require_encryption = yes
mschap: require_strong = yes
mschap: with_ntdomain_hack = yes
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "peap"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/usr/local/etc/raddb/certs/server_keycert.pem"
tls: certificate_file = "/usr/local/etc/raddb/certs/server_keycert.pem"
tls: CA_file = "/usr/local/etc/raddb/certs/cacert.pem"
tls: private_key_password = "whatever"
tls: dh_file = "/usr/local/etc/raddb/certs/dh"
tls: random_file = "/usr/local/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
peap: default_eap_type = "mschapv2"
peap: copy_request_to_tunnel = yes
peap: use_tunneled_reply = no
peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "root"
sql: password = ""
sql: radius_db = "radius"
sql: nas_table = "nas"
sql: sqltrace = no
sql: sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
sql: readclients = yes
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = BINARY '%{SQL-User-Name}' ORDER BY id"
sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = BINARY '%{SQL-User-Name}' ORDER BY id"
sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = BINARY '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = BINARY '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}'"
sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')"
sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())"
sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to root at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): - generate_sql_clients
rlm_sql (sql): Query: SELECT * FROM nas
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Read entry nasname=150.140.188.254,shortname=myAP,secret=apolyxrono
rlm_sql (sql): Adding client 150.140.188.254 (myAP) to clients list
rlm_sql (sql): Released sql socket id: 4
Module: Instantiated sql (sql)
Listening on authentication 150.140.188.218:1812
Listening on accounting 150.140.188.218:1813
Ready to process requests.
rad_recv: Accounting-Request packet from host 150.140.188.220:1039, id=10, length=166
Acct-Status-Type = Interim-Update
Acct-Session-Id = "000475925b2a-000d54fdb5ea-004f"
NAS-IP-Address = 150.140.188.220
Acct-Input-Octets = 667
Acct-Output-Octets = 140
Acct-Input-Packets = 9
Acct-Output-Packets = 3
User-Name = "not available"
Vendor-Specific = 0x564c414e2049442069733a2030
Vendor-Specific = 0x4553534944203d206d794150
Vendor-Specific = 0x45415020547970652069733a206e6f7420617661696c61626c65
Acct-Session-Time = 213
Finished request 0
Going to the next request
--- Walking the entire request list ---
Cleaning up request 0 ID 10 with timestamp 45d07357
Nothing to do. Sleeping until we see a request.
rad_recv: Accounting-Request packet from host 150.140.188.220:1039, id=10, length=166
Acct-Status-Type = Interim-Update
Acct-Session-Id = "000475925b2a-000d54fdb5ea-004f"
NAS-IP-Address = 150.140.188.220
Acct-Input-Octets = 667
Acct-Output-Octets = 140
Acct-Input-Packets = 9
Acct-Output-Packets = 3
User-Name = "not available"
Vendor-Specific = 0x564c414e2049442069733a2030
Vendor-Specific = 0x4553534944203d206d794150
Vendor-Specific = 0x45415020547970652069733a206e6f7420617661696c61626c65
Acct-Session-Time = 213
Finished request 1
Going to the next request
--- Walking the entire request list ---
Cleaning up request 1 ID 10 with timestamp 45d0735c
Nothing to do. Sleeping until we see a request.
rad_recv: Accounting-Request packet from host 150.140.188.220:1040, id=11, length=166
Acct-Status-Type = Interim-Update
Acct-Session-Id = "000475925b2a-000d54fdb5ea-004f"
NAS-IP-Address = 150.140.188.220
Acct-Input-Octets = 746
Acct-Output-Octets = 140
Acct-Input-Packets = 10
Acct-Output-Packets = 3
User-Name = "not available"
Vendor-Specific = 0x564c414e2049442069733a2030
Vendor-Specific = 0x4553534944203d206d794150
Vendor-Specific = 0x45415020547970652069733a206e6f7420617661696c61626c65
Acct-Session-Time = 238
Finished request 2
Going to the next request
--- Walking the entire request list ---
Cleaning up request 2 ID 11 with timestamp 45d07367
Nothing to do. Sleeping until we see a request.
rad_recv: Accounting-Request packet from host 150.140.188.220:1040, id=12, length=172
Acct-Status-Type = Stop
Acct-Session-Id = "000475925b2a-000d54fdb5ea-004f"
NAS-IP-Address = 150.140.188.220
Acct-Input-Octets = 939
Acct-Output-Octets = 177
Acct-Input-Packets = 13
Acct-Output-Packets = 4
User-Name = "not available"
Vendor-Specific = 0x564c414e2049442069733a2030
Vendor-Specific = 0x4553534944203d206d794150
Vendor-Specific = 0x45415020547970652069733a206e6f7420617661696c61626c65
Acct-Session-Time = 242
Acct-Terminate-Cause = NAS-Request
Finished request 3
Going to the next request
--- Walking the entire request list ---
Cleaning up request 3 ID 12 with timestamp 45d0736b
Nothing to do. Sleeping until we see a request.
rad_recv: Accounting-Request packet from host 150.140.188.220:1040, id=11, length=166
Acct-Status-Type = Interim-Update
Acct-Session-Id = "000475925b2a-000d54fdb5ea-004f"
NAS-IP-Address = 150.140.188.220
Acct-Input-Octets = 746
Acct-Output-Octets = 140
Acct-Input-Packets = 10
Acct-Output-Packets = 3
User-Name = "not available"
Vendor-Specific = 0x564c414e2049442069733a2030
Vendor-Specific = 0x4553534944203d206d794150
Vendor-Specific = 0x45415020547970652069733a206e6f7420617661696c61626c65
Acct-Session-Time = 238
Finished request 4
Going to the next request
--- Walking the entire request list ---
Cleaning up request 4 ID 11 with timestamp 45d0736c
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 150.140.188.220:1044, id=5, length=168
NAS-IP-Address = 150.140.188.220
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Framed-MTU = 1400
User-Name = "OEM-AWQCRU94F8J\\pitsioris"
Calling-Station-Id = "000475925b2a"
Called-Station-Id = "000d545c4190"
NAS-Identifier = "3Com Access Point"
EAP-Message = 0x0201001e014f454d2d415751435255393446384a5c70697473696f726973
Message-Authenticator = 0xd94d0d9df4c650def97ab37c7713c95a
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
Segmentation fault (core dumped)
Could anyone please help me to fix this? Thank you very much.
Adreas Polyxronopoulos
---------------------------------
The all-new Yahoo! Mail goes wherever you go - free your email address from your Internet provider.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070212/87e4d6f8/attachment.html>
More information about the Freeradius-Users
mailing list