auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user

[E A]

Hello 
I hav one authentificate problem between my Freeradius and NAT(for VOIP)
what means that i have : No authenticate method (Auth-Type) 
so here is my debug : radiusd -X

rad_recv: Access-Request packet from host 192.168.100.238:1912, id=2, length=684
        User-Name = "192.168.100.180"
        User-Password = "\371\323\025["
        NAS-IP-Address = 192.168.100.238
        NAS-Port-Type = Async
        Service-Type = Login-User
        Called-Station-Id = "907100"
        Calling-Station-Id = "4002"
        Cisco-AVPair = "xpgk-request-type=number"
        Acct-Session-Id = "47306f08-1-b56089b1"
        h323-conf-id = "h323-conf-id=02B21F32 1DEB1BAB 26450001 A8045DEC"
        Cisco-AVPair = "h323-call-id=02B21F32 1DEB1BAB 26440001 A8045DEC"
        h323-gw-id = "h323-gw-id=192.168.100.180"
        Cisco-AVPair = "h323-gw-address=192.168.100.180"
        Cisco-AVPair = "h323-incoming-local-address=192.168.100.238"
        h323-remote-address = "h323-remote-address=194.6.239.4"
        Cisco-AVPair = "h323-remote-id=194.6.239.4"
        Cisco-AVPair = "xpgk-h323-id=4FXS-045dec"
        Cisco-AVPair = "xpgk-src-number-in=4002"
        Cisco-AVPair = "xpgk-src-number-out=4002"
        Cisco-AVPair = "xpgk-dst-number-in=907100"
        Cisco-AVPair = "xpgk-dst-number-out=907100"
        h323-setup-time = "h323-setup-time=11:05:05.000 CEST Wed Jul 11 2007"
        Cisco-AVPair = "xpgk-route-retries=1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  modcall[authorize]: module "chap" returns noop for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
    rlm_realm: No '@' in User-Name = "192.168.100.180", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 1
radius_xlat:  '192.168.100.180'
rlm_sql (sql): sql_set_user escaped user --> '192.168.100.180'
radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '192.168.100.180' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 3
query:  SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '192.168.100.180' ORDER BY id
radius_xlat:  'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
query:  SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id
radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '192.168.100.180' ORDER BY id'
query:  SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '192.168.100.180' ORDER BY id
radius_xlat:  'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
query:  SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE usergroup.Username = '192.168.100.180' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id
rlm_sql (sql): Released sql socket id: 3
rlm_sql (sql): No matching entry in the database for request from user [192.168.100.180]
  modcall[authorize]: module "sql" returns notfound for request 1
modcall: leaving group authorize (returns ok) for request 1
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
auth: Failed to validate the user.
  WARNING: Unprintable characters in the password. ?  Double-check the shared secret on the server and the NAS!
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 2 to 192.168.100.238 port 1912
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 2 with timestamp 46949d41
Nothing to do.  Sleeping until we see a request.


any help?
best regards!!!

       
---------------------------------
 Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070711/e95f722e/attachment.html>