EAP-TLS authentication
anoop_c at sifycorp.com
anoop_c at sifycorp.com
Mon Jul 16 14:58:12 CEST 2007
hi
[root at localhost sbin]# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = \"/usr/local\"
main: localstatedir = \"/usr/local/var\"
main: logdir = \"/usr/local/var/log/radius\"
SO my log directory is /usr/local/var/log/radius
But in that file i am not getting any logs.Do i need to configure anything other than this.
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID: <50340.98343.qm at web26004.mail.ukl.yahoo.com>
Content-Type: text/plain; charset=\"iso-8859-1\"
There is log file. Check your configure log to find out the path you specified
for the log. You can also run in debug mode. radiusd -
Regards
Anoop
Quoting freeradius-users-request at lists.freeradius.org:
> Send Freeradius-Users mailing list submissions to
> freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body \'help\' to
> freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
> freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific
> than \"Re: Contents of Freeradius-Users digest...\"
>
>
> Today\'s Topics:
>
> 1. FreeRadius and User-Password from Cisco Device
> (nicolaskarp at free.fr)
> 2. How to configure EAP Identity in 1.1.3 (Govardhana K N)
> 3. Re: FreeRadius and User-Password from Cisco Device (Stefan
> Winter)
> 4. Re : EAP-TLS authentication (Eshun Benjamin)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 16 Jul 2007 12:16:22 +0200
> From: nicolaskarp at free.fr
> Subject: FreeRadius and User-Password from Cisco Device
> To: freeradius-users at lists.freeradius.org
> Message-ID: <1184580982.469b457602cb2 at imp.free.fr>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hello,
>
> Here a access-request packet from a Cisco Router (2621) :
> NAS-IP-Address = \"IP_NAS\"
> NAS-Port = 66
> NAS-Port-Type = Virtual
> User-Name = \"MyUserLogin\"
> Calling-Station-Id = \"IP NAS\"
> User-Password = \"ryMyPass/WordHashNotPlainText`\"
>
> Why is my password not in plain text ? With other cisco devices (Switch
> 2960 for
> example), the User-Password is in plain text.. If I receive a hashed
> password,
> the authentication doesn\'t work..
>
>
> My AAA configuration :
> aaa new-model
> aaa authentication login default group radius line
> aaa authentication login console line
> aaa authorization exec default group radius none
> aaa authorization network default group radius
> aaa accounting exec default start-stop group radius
> aaa accounting connection default start-stop group radius
>
> What can I do ?
>
> Thanks for your help !
>
> Nicos.
>
>
>
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 16 Jul 2007 15:54:09 +0530
> From: \"Govardhana K N\" <govardhan.nagarajaiah at gmail.com>
> Subject: How to configure EAP Identity in 1.1.3
> To: FreeRadius <freeradius-users at lists.freeradius.org>
> Message-ID:
> <5f382300707160324s57339da5nc72c934408d4c971 at mail.gmail.com>
> Content-Type: text/plain; charset=\"iso-8859-1\"
>
> Hi,
>
> I was trying to configure FreeRadius server with EAP authentication. AS
> mentioned in \"eap.conf\", I didn\'t change the Auth-Type, but I was
> sending a
> EAP message, and Message-Authenticator attributes in Access-Request.
> When i
> tried sending an Access-Request with EAP-Message, I got the following
> error
> \"rlm_eap: Identity Unknown, authentication failed\".
>
> How to configure the Identity for EAP?
>
> debug log from server:
> ---------------------------------
>
> Starting - reading configuration files ...
> reread_config: reading radiusd.conf
> Config: including file: /etc/freeradius/proxy.conf
> Config: including file: /etc/freeradius/clients.conf
> Config: including file: /etc/freeradius/snmp.conf
> Config: including file: /etc/freeradius/eap.conf
> Config: including file: /etc/freeradius/sql.conf
> main: prefix = \"/usr\"
> main: localstatedir = \"/var\"
> main: logdir = \"/var/log/freeradius\"
> main: libdir = \"/usr/lib/freeradius\"
> main: radacctdir = \"/var/log/freeradius/radacct\"
> main: hostname_lookups = no
> main: max_request_time = 30
> main: cleanup_delay = 5
> main: max_requests = 1024
> main: delete_blocked_requests = 0
> main: port = 1812
> main: allow_core_dumps = no
> main: log_stripped_names = yes
> main: log_file = \"/var/log/freeradius/radius.log\"
> main: log_auth = no
> main: log_auth_badpass = no
> main: log_auth_goodpass = no
> main: pidfile = \"/var/run/freeradius/freeradius.pid\"
> main: bind_address = 127.0.0.1 IP address [127.0.0.1]
> main: user = \"freerad\"
> main: group = \"freerad\"
> main: usercollide = no
> main: lower_user = \"no\"
> main: lower_pass = \"no\"
> main: nospace_user = \"no\"
> main: nospace_pass = \"no\"
> main: checkrad = \"/usr/sbin/checkrad\"
> main: proxy_requests = no
> proxy: retry_delay = 5
> proxy: retry_count = 3
> proxy: synchronous = no
> proxy: default_fallback = yes
> proxy: dead_time = 120
> proxy: post_proxy_authorize = no
> proxy: wake_all_if_all_dead = no
> security: max_attributes = 200
> security: reject_delay = 1
> security: status_server = no
> main: debug_level = 0
> read_config_files: reading dictionary
> read_config_files: reading naslist
> Using deprecated naslist file. Support for this will go away soon.
> read_config_files: reading clients
> read_config_files: reading realms
> radiusd: entering modules setup
> Module: Library search path is /usr/lib/freeradius
> Module: Loaded exec
> exec: wait = no
> exec: program = \"(null)\"
> exec: input_pairs = \"request\"
> exec: output_pairs = \"(null)\"
> exec: packet_type = \"(null)\"
> Module: Instantiated exec (exec)
> Module: Loaded expr
> Module: Instantiated expr (expr)
> Module: Loaded PAP
> pap: encryption_scheme = \"crypt\"
> Module: Instantiated pap (pap)
> Module: Loaded CHAP
> Module: Instantiated chap (chap)
> Module: Loaded MS-CHAP
> mschap: use_mppe = yes
> mschap: require_encryption = no
> mschap: require_strong = no
> mschap: with_ntdomain_hack = no
> mschap: passwd = \"(null)\"
> mschap: ntlm_auth = \"(null)\"
> Module: Instantiated mschap (mschap)
> Module: Loaded System
> unix: cache = no
> unix: passwd = \"/etc/passwd\"
> unix: shadow = \"/etc/shadow\"
> unix: group = \"/etc/group\"
> unix: radwtmp = \"/var/log/freeradius/radwtmp\"
> unix: usegroup = no
> unix: cache_reload = 600
> Module: Instantiated unix (unix)
> Module: Loaded eap
> eap: default_eap_type = \"md5\"
> eap: timer_expire = 60
> eap: ignore_unknown_eap_types = no
> eap: cisco_accounting_username_bug = no
> rlm_eap: Loaded and initialized type md5
> rlm_eap: Loaded and initialized type leap
> gtc: challenge = \"Password: \"
> gtc: auth_type = \"PAP\"
> rlm_eap: Loaded and initialized type gtc
> mschapv2: with_ntdomain_hack = no
> rlm_eap: Loaded and initialized type mschapv2
> Module: Instantiated eap (eap)
> Module: Loaded preprocess
> preprocess: huntgroups = \"/etc/freeradius/huntgroups\"
> preprocess: hints = \"/etc/freeradius/hints\"
> preprocess: with_ascend_hack = no
> preprocess: ascend_channels_per_line = 23
> preprocess: with_ntdomain_hack = no
> preprocess: with_specialix_jetstream_hack = no
> preprocess: with_cisco_vsa_hack = no
> preprocess: with_alvarion_vsa_hack = no
> Module: Instantiated preprocess (preprocess)
> Module: Loaded realm
> realm: format = \"suffix\"
> realm: delimiter = \"@\"
> realm: ignore_default = no
> realm: ignore_null = no
> Module: Instantiated realm (suffix)
> Module: Loaded files
> files: usersfile = \"/etc/freeradius/users\"
> files: acctusersfile = \"/etc/freeradius/acct_users\"
> files: preproxy_usersfile = \"/etc/freeradius/preproxy_users\"
> files: compat = \"no\"
> Module: Instantiated files (files)
> Module: Loaded Acct-Unique-Session-Id
> acct_unique: key = \"User-Name, Acct-Session-Id, NAS-IP-Address,
> Client-IP-Address, NAS-Port\"
> Module: Instantiated acct_unique (acct_unique)
> Module: Loaded detail
> detail: detailfile =
> \"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d\"
> detail: detailperm = 384
> detail: dirperm = 493
> detail: locking = no
> Module: Instantiated detail (detail)
> Module: Loaded radutmp
> radutmp: filename = \"/var/log/freeradius/radutmp\"
> radutmp: username = \"%{User-Name}\"
> radutmp: case_sensitive = yes
> radutmp: check_with_nas = yes
> radutmp: perm = 384
> radutmp: callerid = yes
> Module: Instantiated radutmp (radutmp)
> Listening on authentication 127.0.0.1:1812
> Listening on accounting 127.0.0.1:1813
> Ready to process requests.
> rad_recv: Access-Request packet from host 127.0.0.1:32813, id=179,
> length=95
> User-Name = \"jrc\"
> NAS-Identifier = \"jrcnas\"
> NAS-Port-Type = Ethernet
> CUI = \"0\"
> Service-Type = Framed-User
> Framed-MTU = 1400
> Calling-Station-Id = \"1:1:1:1:1:1\"
> EAP-Message = 0x01100008016a7263
> Message-Authenticator = 0x64c5851b699cd2c027877bbb94fe7f8b
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
> modcall[authorize]: module \"preprocess\" returns ok for request 0
> modcall[authorize]: module \"chap\" returns noop for request 0
> modcall[authorize]: module \"mschap\" returns noop for request 0
> rlm_realm: No \'@\' in User-Name = \"jrc\", looking up realm NULL
> rlm_realm: No such realm \"NULL\"
> modcall[authorize]: module \"suffix\" returns noop for request 0
> rlm_eap: EAP packet type request id 16 length 8
> rlm_eap: No EAP Start, assuming it\'s an on-going EAP conversation
> modcall[authorize]: module \"eap\" returns updated for request 0
> users: Matched entry DEFAULT at line 152
> users: Matched entry jrc at line 178
> modcall[authorize]: module \"files\" returns ok for request 0
> modcall: leaving group authorize (returns updated) for request 0
> rad_check_password: Found Auth-Type EAP
> auth: type \"EAP\"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 0
> rlm_eap: Identity Unknown, authentication failed
> rlm_eap: Failed in handler
> modcall[authenticate]: module \"eap\" returns invalid for request 0
> modcall: leaving group authenticate (returns invalid) for request 0
> auth: Failed to validate the user.
> Delaying request 0 for 1 seconds
> Finished request 0
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Sending Access-Reject of id 179 to 127.0.0.1 port 32813
> Waking up in 4 seconds...
> --- Walking the entire request list ---
> Cleaning up request 0 ID 179 with timestamp 469b9233
> Nothing to do. Sleeping until we see a request.
>
>
> debug log from Client:
> -------------------------------------
>
> cheux301:/home/govardhana# radeapclient -x localhost auth jrcsecret
> <access-request
>
> +++> About to send encoded packet:
> User-Name = \"jrc\"
> NAS-Identifier = \"jrcnas\"
> NAS-Port-Type = Ethernet
> CUI = \"0\"
> Service-Type = Framed-User
> Framed-MTU = 1400
> Calling-Station-Id = \"1:1:1:1:1:1\"
> EAP-Message = 0x01100008016a7263
> Message-Authenticator = 0x00
> Sending Access-Request of id 179 to 127.0.0.1 port 1812
> User-Name = \"jrc\"
> NAS-Identifier = \"jrcnas\"
> NAS-Port-Type = Ethernet
> CUI = \"0\"
> Service-Type = Framed-User
> Framed-MTU = 1400
> Calling-Station-Id = \"1:1:1:1:1:1\"
> EAP-Message = 0x01100008016a7263
> Message-Authenticator = 0x00000000000000000000000000000000
> rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=179,
> length=20
> rlm_eap: EAP-Message not found
> <+++ EAP decoded packet:
>
>
> Thanks & Regards,
> Govardhana K N
>
>
>
>
> --
> With Regards,
> Govardhana K N
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> https://lists.freeradius.org/pipermail/freeradius-users/attachments/20070716/79e22469/attachment-0001.html
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 16 Jul 2007 12:31:27 +0200
> From: Stefan Winter <stefan.winter at restena.lu>
> Subject: Re: FreeRadius and User-Password from Cisco Device
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <200707161231.31934.stefan.winter at restena.lu>
> Content-Type: text/plain; charset=\"iso-8859-1\"
>
> > User-Password = \"ryMyPass/WordHashNotPlainText`\"
> >
> > Why is my password not in plain text ? With other cisco devices
> (Switch
> > 2960 for example), the User-Password is in plain text.. If I receive
> a
> > hashed password, the authentication doesn\'t work..
>
> Are you sure it\'s hashed, and not just garbled? First guess is: check
> the
> shared secret on the Cisco device and the server.
>
> Stefan
>
> --
> Stefan WINTER
>
> Stiftung RESTENA - R?seau T?l?informatique de l\'Education Nationale et
> de
> la Recherche
> Ingenieur Forschung & Entwicklung
>
> 6, rue Richard Coudenhove-Kalergi
> L-1359 Luxembourg
> E-Mail: stefan.winter at restena.lu ? ? Tel.: ? ?+352 424409-1
> http://www.restena.lu ? ? ? ? ? ? ? Fax: ? ? ?+352 422473
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: application/pgp-signature
> Size: 189 bytes
> Desc: This is a digitally signed message part.
> Url :
> https://lists.freeradius.org/pipermail/freeradius-users/attachments/20070716/47331005/attachment-0001.bin
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 16 Jul 2007 11:13:54 +0000 (GMT)
> From: Eshun Benjamin <bkeshun at yahoo.fr>
> Subject: Re : EAP-TLS authentication
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <50340.98343.qm at web26004.mail.ukl.yahoo.com>
> Content-Type: text/plain; charset=\"iso-8859-1\"
>
>
> There is log file. Check your configure log to find out the path you
> specified for the log. You can also run in debug mode. radiusd -X
>
>
>
> ==================================================
> Benjamin K. Eshun
>
> ----- Message d\'origine ----
> De : \"anoop_c at sifycorp.com\" <anoop_c at sifycorp.com>
> ? : freeradius-users at lists.freeradius.org
> Envoy? le : Lundi, 16 Juillet 2007, 11h41mn 05s
> Objet : Re: EAP-TLS authentication
>
> Dear Alan
> I have been using Navis radius.Now i decided to move to free
> radius.In the navis radius there is a log file .So it will be shown as
> \"Username\" login ok or \"user login failed due to..\"
> So these logs will be very helpful for troubleshooting.
> In free radius thers is no log file is getting updated.
> This is not accounting.
>
> Regards
> Anoop
>
> Content-Type: text/plain; charset=ISO-8859-1
>
> anoop_c at sifycorp.com wrote:
> > Everything is working fine.But the logs are not coming when user
> authenticates.
>
> What logs? Accounting?
>
> If so, see the FAQ.
>
> Alan DeKok.
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
>
>
>
>
>
>
>
> _____________________________________________________________________________
>
> Ne gardez plus qu\'une seule adresse mail ! Copiez vos mails vers Yahoo!
> Mail
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> https://lists.freeradius.org/pipermail/freeradius-users/attachments/20070716/a36153fb/attachment.html
>
>
> ------------------------------
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
> End of Freeradius-Users Digest, Vol 27, Issue 88
> ************************************************
>
More information about the Freeradius-Users
mailing list