RLM_PERL Integration Issue

[FreeRadius-ML]

Ok, now we are getting somewhere, I'm getting the following output:

rad_recv: Access-Request packet from host 192.168.2.80:43835, id=102, length=234
        User-Name = "101 at 192.168.2.80"
        Digest-Attributes = 0x0a05313031
        Digest-Attributes = 0x010e3139322e3136382e322e3830
        Digest-Attributes = 0x022a34363939653236343763333537313631373066343236656466366262383661666535633736636466
        Digest-Attributes = 0x04127369703a3139322e3136382e322e3830
        Digest-Attributes = 0x030a5245474953544552
        Digest-Attributes = 0x050661757468
        Digest-Attributes = 0x090a3030303134313333
        Digest-Attributes = 0x081237633762663032366635646533653537
        Digest-Response = "90ea471ad7040bab866ffa15ee80e21d"
        Service-Type = Authenticate-Only
        Sip-Uri-User = "101"
        NAS-Port = 5060
        NAS-IP-Address = 192.168.2.80
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "preprocess" returns ok for request 6
radius_xlat:  '/var/log/radius/radacct/192.168.2.80/auth-detail-20070715'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.2.80/auth-detail-20070715
  modcall[authorize]: module "auth_log" returns ok for request 6
perl_pool: item 0x8af4268 asigned new request. Handled so far: 1 found interpetator at address 0x8af4268 perl_pool total/active/spare [32/0/32] Unreserve perl at address 0x8af4268
  modcall[authorize]: module "perl" returns ok for request 6
modcall: leaving group authorize (returns ok) for request 6
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
auth: Failed to validate the user.
Login incorrect: [101 at 192.168.2.80/<no User-Password attribute>] (from client openser port 5060) Delaying request 6 for 1 seconds Finished request 6 Going to the next request Waking up in 2 seconds...

I think I have a section missing from FreeRadius configuration, is that correct?

Zap2Link

-----Original Message-----
From: freeradius-users-bounces+freeradius=zap2link.com at lists.freeradius.org [mailto:freeradius-users-bounces+freeradius=zap2link.com at lists.freeradius.org] On Behalf Of tnt at kalik.co.yu
Sent: Tuesday, July 17, 2007 12:08 PM
To: FreeRadius users mailing list
Subject: Re: RLM_PERL integration issue

radiusd -X

Ivan Kalik
Kalik Informatika ISP




Dana 17/7/2007, "freeradius at zap2link.com" <freeradius at zap2link.com>
piše:

>Hi All,
>
>
>
>  I've followed the rlm_perl information to integrate a PERL based 
>example for Radius Authentication.
>
>I basically used the same example that is in the document. I know that 
>the script is loaded whe FreeRadius is loaded, however, It would seem 
>that all requests to the Radius server are not processed via rlm_perl.
>
>
>
>  Is there a way to verify that rlm_perl is invoked?
>
>
>
>Zap2Link
>
>
>

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html