Attribute "User-Password" is required for authentication
tnt at kalik.co.yu
tnt at kalik.co.yu
Tue Jun 19 00:14:56 CEST 2007
And where is your user/pass stored? It's not in users file and I don't
see any database configured.
Ivan Kalik
Kalik Informatika ISP
Dana 18/6/2007, "Cody Jarrett" <cody.jarrett at itfreedom.com> piše:
>Oh, I had "Default auth-type := pam" in users. I removed that line and
>get a much longer debug output when I try to connect with the xp machine
>to the wireless. radtest fails with this message "auth: No authenticate
>method (Auth-Type) configuration found for the request: Rejecting the
>user. I have a feeling something is wrong with my eap.conf, I have debug
>below, any input would be appreciated.
>
>eap.conf
> eap {
> default_eap_type = peap
> timer_expire = 60
> ignore_unknown_eap_types = no
> md5 {
> }
>
> gtc {
> auth_type = PAP
> }
> tls {
> private_key_password = testing123
> private_key_file = ${dbdir}/certs/pem/server.pem
> certificate_file = ${dbdir}/certs/pem/server.pem
> CA_file = /etc/raddb/certs/pem/root.pem
> dh_file = ${raddbdir}/certs/dh
> random_file = /dev/urandom
> }
> ttls {
> default_eap_type = md5
> }
> peap {
> default_eap_type = mschapv2
> proxy_tunneled_request_as_eap = no
> }
> mschapv2 {
> }
> }
>
>users:
>DEFAULT Service-Type == Framed-User
> Framed-Protocol == PPP,
> Framed-Protocol = PPP,
> Framed-Compression = Van-Jacobson-TCP-IP
>
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=0, length=185
> Message-Authenticator = 0x381988b4c12ff0f1e3fa2e7e018b8ae5
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message = 0x0200000d01636a617272657474
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> modcall[authorize]: module "chap" returns noop for request 0
> modcall[authorize]: module "mschap" returns noop for request 0
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_eap: EAP packet type response id 0 length 13
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 0
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 0
>modcall: leaving group authorize (returns updated) for request 0
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 0
> rlm_eap: EAP Identity
> rlm_eap: processing type tls
> rlm_eap_tls: Initiate
> rlm_eap_tls: Start returned 1
> modcall[authenticate]: module "eap" returns handled for request 0
>modcall: leaving group authenticate (returns handled) for request 0
>Sending Access-Challenge of id 0 to 10.1.22.10 port 2626
> EAP-Message = 0x010100061920
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x36ba98c6e90e487eb0cfe88fcb5d879a
>Finished request 0
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 6 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=1, length=270
> Message-Authenticator = 0x43e1cd5ba6e967f5717089de44e05384
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> State = 0x36ba98c6e90e487eb0cfe88fcb5d879a
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message =
>0x0201005019800000004616030100410100003d03014676f85e6be1d378fdbdbe6213a94362bd4453b8699af3896b955781d14034be00001600040005000a000900640062000300060013001200630100
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 1
> modcall[authorize]: module "preprocess" returns ok for request 1
> modcall[authorize]: module "chap" returns noop for request 1
> modcall[authorize]: module "mschap" returns noop for request 1
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 1
> rlm_eap: EAP packet type response id 1 length 80
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 1
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 1
>modcall: leaving group authorize (returns updated) for request 1
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 1
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
>rlm_eap_tls: Length Included
> eaptls_verify returned 11
> (other): before/accept initialization
> TLS_accept: before/accept initialization
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
> TLS_accept: SSLv3 read client hello A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
> TLS_accept: SSLv3 write server hello A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 04f2], Certificate
> TLS_accept: SSLv3 write certificate A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
> TLS_accept: SSLv3 write server done A
> TLS_accept: SSLv3 flush data
> TLS_accept:error in SSLv3 read client certificate A
>rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
>In SSL Handshake Phase
>In SSL Accept mode
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 1
>modcall: leaving group authenticate (returns handled) for request 1
>Sending Access-Challenge of id 1 to 10.1.22.10 port 2626
> EAP-Message =
>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
> EAP-Message =
>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
> EAP-Message =
>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
> EAP-Message =
>0x696e31133011060355040a130a49542046726565646f6d301e170d3037303631383135303435315a170d3137303631353135303435315a3043310b3009060355040613025553310e300c060355040813055465786173310f300d0603550407130641757374696e31133011060355040a130a49542046726565646f6d30819f300d06092a864886f70d010101050003818d0030818902818100c5acdaf11ba8a3d0201544c60b08411c4a9e8fd2daf55c967d4918da50faa20b7301746d128f26d49e62cfa694be25f6ee5fd067db4aaa851a0f85e49ce5180377d981a35b5869aa4cb1a325b5fbb19efcde699ee112028503f0a8ba21cf36d2a55765a2
> EAP-Message = 0x8bcf453bc58cbc621f2c93bffa3c802435d0ef96af8f
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xdb7e976ee5b705e695f599c38b37c3ff
>Finished request 1
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 5 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=2, length=196
> Message-Authenticator = 0xfe7be571e4388b7f6070941972326855
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> State = 0xdb7e976ee5b705e695f599c38b37c3ff
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message = 0x020200061900
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 2
> modcall[authorize]: module "preprocess" returns ok for request 2
> modcall[authorize]: module "chap" returns noop for request 2
> modcall[authorize]: module "mschap" returns noop for request 2
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 2
> rlm_eap: EAP packet type response id 2 length 6
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 2
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 2
>modcall: leaving group authorize (returns updated) for request 2
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 2
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
>rlm_eap_tls: Received EAP-TLS ACK message
> rlm_eap_tls: ack handshake fragment handler
> eaptls_verify returned 1
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 2
>modcall: leaving group authenticate (returns handled) for request 2
>Sending Access-Challenge of id 2 to 10.1.22.10 port 2626
> EAP-Message =
>0x01030155190041c9f615db2b0203010001a381a53081a2301d0603551d0e04160414c7c37e5eb8041d453578465052e5ee5064d4778630730603551d23046c306a8014c7c37e5eb8041d453578465052e5ee5064d47786a147a4453043310b3009060355040613025553310e300c060355040813055465786173310f300d0603550407130641757374696e31133011060355040a130a49542046726565646f6d8209008830ae147680554c300c0603551d13040530030101ff300d06092a864886f70d0101050500038181006a97ee175a18622c2bace0c431706ec598f7ea3766cb8f7980ebcc0e2ec7138e2ed6c08f598f27c2e0a22ab81e48127aeb
> EAP-Message =
>0x730816c95730f262d998622fef7ab67085b11171fcf91eedc0c722978688b4d95cc733f75cc8129c379c68664c1d4b25f86f4bfe077e3f816874b5164236b79ad98f7f21bff654afa0f389c860452416030100040e000000
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xa59e16e46b5a6ec02559580464dcdfc7
>Finished request 2
>Going to the next request
>Waking up in 5 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=3, length=382
> Message-Authenticator = 0x4fcb37f77d06f6b896b44d378446425a
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> State = 0xa59e16e46b5a6ec02559580464dcdfc7
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message =
>0x020300c01980000000b61603010086100000820080035f438a01efd8ab7c7a294a61aa7e875d7f06a8b634a2a73a3ec20b5069ec4dc0137747833e1252a070c6a3ce81917fd9dd1b712aaccd042e95790c91f15f1dd2408872453cb91d824630458d5b1546a2c60bcaee1207ddc57472ffc6afe456a82c452e1b3efc2f786ed598851a0a86be44c9dd31ba87d5c21cba7ef7e30d3a1403010001011603010020b3d94931dfd1413c9c4cb7248eaa9bfa185de0ce13cda40c4b717e7ac0271ba8
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 3
> modcall[authorize]: module "preprocess" returns ok for request 3
> modcall[authorize]: module "chap" returns noop for request 3
> modcall[authorize]: module "mschap" returns noop for request 3
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 3
> rlm_eap: EAP packet type response id 3 length 192
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 3
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 3
>modcall: leaving group authorize (returns updated) for request 3
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 3
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
>rlm_eap_tls: Length Included
> eaptls_verify returned 11
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
> TLS_accept: SSLv3 read client key exchange A
> rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
> TLS_accept: SSLv3 read finished A
> rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
> TLS_accept: SSLv3 write change cipher spec A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
> TLS_accept: SSLv3 write finished A
> TLS_accept: SSLv3 flush data
> (other): SSL negotiation finished successfully
>rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
>SSL Connection Established
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 3
>modcall: leaving group authenticate (returns handled) for request 3
>Sending Access-Challenge of id 3 to 10.1.22.10 port 2626
> EAP-Message =
>0x0104003119001403010001011603010020935e4cc86eaaa1072ebd4e4c8e29ec031c939675d0c8c4d896dd671395d3fa1f
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xd79c6820132ebef7cf1548ab25a93afa
>Finished request 3
>Going to the next request
>Waking up in 5 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=4, length=196
> Message-Authenticator = 0x4064e5721fc1c83e994ee45dc66e4fb4
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> State = 0xd79c6820132ebef7cf1548ab25a93afa
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message = 0x020400061900
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 4
> modcall[authorize]: module "preprocess" returns ok for request 4
> modcall[authorize]: module "chap" returns noop for request 4
> modcall[authorize]: module "mschap" returns noop for request 4
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 4
> rlm_eap: EAP packet type response id 4 length 6
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 4
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 4
>modcall: leaving group authorize (returns updated) for request 4
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 4
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
>rlm_eap_tls: Received EAP-TLS ACK message
> rlm_eap_tls: ack handshake is finished
> eaptls_verify returned 3
> eaptls_process returned 3
> rlm_eap_peap: EAPTLS_SUCCESS
> modcall[authenticate]: module "eap" returns handled for request 4
>modcall: leaving group authenticate (returns handled) for request 4
>Sending Access-Challenge of id 4 to 10.1.22.10 port 2626
> EAP-Message =
>0x0105002019001703010015182fff1e23fe4e9d74e4dd55b6a10b80d9cb1b6f3e
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x890db137000563152da88540de2781e1
>Finished request 4
>Going to the next request
>Waking up in 5 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=5, length=226
> Message-Authenticator = 0x7ad74000bf14f349569c0ccfb1540c0d
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> State = 0x890db137000563152da88540de2781e1
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message =
>0x0205002419001703010019125b45ef09a64c9d64c8b7704291bcf4e8b811339b0138b716
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 5
> modcall[authorize]: module "preprocess" returns ok for request 5
> modcall[authorize]: module "chap" returns noop for request 5
> modcall[authorize]: module "mschap" returns noop for request 5
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 5
> rlm_eap: EAP packet type response id 5 length 36
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 5
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 5
>modcall: leaving group authorize (returns updated) for request 5
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 5
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: Identity - cjarrett
> rlm_eap_peap: Tunneled data is valid.
> PEAP: Got tunneled EAP-Message
> EAP-Message = 0x0205000d01636a617272657474
> PEAP: Got tunneled identity of cjarrett
> PEAP: Setting default EAP type for tunneled EAP session.
> PEAP: Setting User-Name to cjarrett
> PEAP: Sending tunneled request
> EAP-Message = 0x0205000d01636a617272657474
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = "cjarrett"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 5
> modcall[authorize]: module "preprocess" returns ok for request 5
> modcall[authorize]: module "chap" returns noop for request 5
> modcall[authorize]: module "mschap" returns noop for request 5
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 5
> rlm_eap: EAP packet type response id 5 length 13
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 5
> modcall[authorize]: module "files" returns notfound for request 5
>modcall: leaving group authorize (returns updated) for request 5
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 5
> rlm_eap: EAP Identity
> rlm_eap: processing type mschapv2
>rlm_eap_mschapv2: Issuing Challenge
> modcall[authenticate]: module "eap" returns handled for request 5
>modcall: leaving group authenticate (returns handled) for request 5
> PEAP: Got tunneled reply RADIUS code 11
> EAP-Message =
>0x010600221a0106001d1058699d07aa7a08377307f1c5ed250f94636a617272657474
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x6a6983e73566293debc28f9785f4ba2c
> PEAP: Processing from tunneled session code 0x9c06760 11
> EAP-Message =
>0x010600221a0106001d1058699d07aa7a08377307f1c5ed250f94636a617272657474
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x6a6983e73566293debc28f9785f4ba2c
> PEAP: Got tunneled Access-Challenge
> modcall[authenticate]: module "eap" returns handled for request 5
>modcall: leaving group authenticate (returns handled) for request 5
>Sending Access-Challenge of id 5 to 10.1.22.10 port 2626
> EAP-Message =
>0x010600391900170301002ef2c5b8b197e6c26f51f804007aeffa9201509b57c8efb035180baa21bb94725c31867049409c85079be2e3428678
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xb9a3bd04514836a4cba31c175e9c77e6
>Finished request 5
>Going to the next request
>Waking up in 5 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=6, length=280
> Message-Authenticator = 0xc08fd8e4919b60e5bd7e5470be52c475
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> State = 0xb9a3bd04514836a4cba31c175e9c77e6
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message =
>0x0206005a1900170301004f9d20dcfecf2d949b98e83b0ef8ed9db381e1102982367126820039e03f3c11fb6d43998ca6a01e65a19e9ea7d823bd743bd8eb1d732d8dae19c82f39c08ad02e9d63fe13d0c25900ac075cdc3ada61
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 6
> modcall[authorize]: module "preprocess" returns ok for request 6
> modcall[authorize]: module "chap" returns noop for request 6
> modcall[authorize]: module "mschap" returns noop for request 6
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 6
> rlm_eap: EAP packet type response id 6 length 90
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 6
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 6
>modcall: leaving group authorize (returns updated) for request 6
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 6
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: EAP type mschapv2
> rlm_eap_peap: Tunneled data is valid.
> PEAP: Got tunneled EAP-Message
> EAP-Message =
>0x020600431a0206003e31177b8b92c88cf3358dc9dce769bb3fe80000000000000000c4134ec0576a1f17704daad6e18e3a3b5f08dec2a3b5f1ba00636a617272657474
> PEAP: Setting User-Name to cjarrett
> PEAP: Adding old state with 6a 69
> PEAP: Sending tunneled request
> EAP-Message =
>0x020600431a0206003e31177b8b92c88cf3358dc9dce769bb3fe80000000000000000c4134ec0576a1f17704daad6e18e3a3b5f08dec2a3b5f1ba00636a617272657474
> FreeRADIUS-Proxied-To = 127.0.0.1
> User-Name = "cjarrett"
> State = 0x6a6983e73566293debc28f9785f4ba2c
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 6
> modcall[authorize]: module "preprocess" returns ok for request 6
> modcall[authorize]: module "chap" returns noop for request 6
> modcall[authorize]: module "mschap" returns noop for request 6
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 6
> rlm_eap: EAP packet type response id 6 length 67
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 6
> modcall[authorize]: module "files" returns notfound for request 6
>modcall: leaving group authorize (returns updated) for request 6
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 6
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/mschapv2
> rlm_eap: processing type mschapv2
> Processing the authenticate section of radiusd.conf
>modcall: entering group MS-CHAP for request 6
> rlm_mschap: No User-Password configured. Cannot create LM-Password.
> rlm_mschap: No User-Password configured. Cannot create NT-Password.
> rlm_mschap: Told to do MS-CHAPv2 for cjarrett with NT-Password
> rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication.
> rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
> modcall[authenticate]: module "mschap" returns reject for request 6
>modcall: leaving group MS-CHAP (returns reject) for request 6
> rlm_eap: Freeing handler
> modcall[authenticate]: module "eap" returns reject for request 6
>modcall: leaving group authenticate (returns reject) for request 6
>auth: Failed to validate the user.
> PEAP: Got tunneled reply RADIUS code 3
> MS-CHAP-Error = "\006E=691 R=1"
> EAP-Message = 0x04060004
> Message-Authenticator = 0x00000000000000000000000000000000
> PEAP: Processing from tunneled session code 0x9c06198 3
> MS-CHAP-Error = "\006E=691 R=1"
> EAP-Message = 0x04060004
> Message-Authenticator = 0x00000000000000000000000000000000
> PEAP: Tunneled authentication was rejected.
> rlm_eap_peap: FAILURE
> modcall[authenticate]: module "eap" returns handled for request 6
>modcall: leaving group authenticate (returns handled) for request 6
>Sending Access-Challenge of id 6 to 10.1.22.10 port 2626
> EAP-Message =
>0x010700261900170301001bf1f9bd115db78bcad8de732871f5282e1a0754b687ddc300965f0f
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x56c5dd00772486e492f840877441be62
>Finished request 6
>Going to the next request
>Waking up in 5 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=7, length=228
> Message-Authenticator = 0x55ab371942148ebc1eed6c3b87d626de
> Service-Type = Framed-User
> User-Name = "cjarrett"
> Framed-MTU = 1488
> State = 0x56c5dd00772486e492f840877441be62
> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
> Calling-Station-Id = "00-0E-35-FF-2A-82"
> NAS-Identifier = "AP11G"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message =
>0x020700261900170301001b4fbf51c05fb105bb02792f87fba4e8cd787ff2beafe7d334716e53
> NAS-IP-Address = 10.1.22.10
> NAS-Port = 2
> NAS-Port-Id = "STA port # 2"
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 7
> modcall[authorize]: module "preprocess" returns ok for request 7
> modcall[authorize]: module "chap" returns noop for request 7
> modcall[authorize]: module "mschap" returns noop for request 7
> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 7
> rlm_eap: EAP packet type response id 7 length 38
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 7
> users: Matched entry DEFAULT at line 176
> modcall[authorize]: module "files" returns ok for request 7
>modcall: leaving group authorize (returns updated) for request 7
> rad_check_password: Found Auth-Type EAP
>auth: type "EAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group authenticate for request 7
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: Received EAP-TLV response.
> rlm_eap_peap: Tunneled data is valid.
> rlm_eap_peap: Had sent TLV failure. User was rejcted rejected
>earlier in this session.
> rlm_eap: Handler failed in EAP/peap
> rlm_eap: Failed in EAP select
> modcall[authenticate]: module "eap" returns invalid for request 7
>modcall: leaving group authenticate (returns invalid) for request 7
>auth: Failed to validate the user.
>Delaying request 7 for 1 seconds
>Finished request 7
>Going to the next request
>Waking up in 5 seconds...
>rad_recv: Access-Request packet from host 10.1.22.10:2626, id=7, length=228
>Sending Access-Reject of id 7 to 10.1.22.10 port 2626
> EAP-Message = 0x04070004
> Message-Authenticator = 0x00000000000000000000000000000000
>--- Walking the entire request list ---
>Waking up in 2 seconds...
>--- Walking the entire request list ---
>Cleaning up request 0 ID 0 with timestamp 4676f842
>Waking up in 1 seconds...
>
>
>tnt at kalik.co.yu wrote:
>> You are forcing Auth-Type PAM and doing EAP. Where is Auth-Type coming
>> from? One of the DEFAULT entries? Don't set Auth-Type! Let the server
>> swich to one that's needed.
>>
>> Ivan Kalik
>> Kalik Informatika ISP
>>
>>
>> Dana 18/6/2007, "Cody Jarrett" <cody.jarrett at itfreedom.com> piše:
>>
>>> Sorry, 10.1.22.10 is the ip of my 3com.
>>>
>>> rad_recv: Access-Request packet from host 10.1.22.10:2458, id=0, length=185
>>> Message-Authenticator = 0xb0ba1aec817dfd6ab3fc3b0e49fb1125
>>> Service-Type = Framed-User
>>> User-Name = "cjarrett"
>>> Framed-MTU = 1488
>>> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test"
>>> Calling-Station-Id = "00-0E-35-FF-2A-82"
>>> NAS-Identifier = "AP11G"
>>> NAS-Port-Type = Wireless-802.11
>>> Connect-Info = "CONNECT 54Mbps 802.11g"
>>> EAP-Message = 0x0200000d01636a617272657474
>>> NAS-IP-Address = 10.1.22.10
>>> NAS-Port = 2
>>> NAS-Port-Id = "STA port # 2"
>>> Processing the authorize section of radiusd.conf
>>> modcall: entering group authorize for request 0
>>> modcall[authorize]: module "preprocess" returns ok for request 0
>>> modcall[authorize]: module "chap" returns noop for request 0
>>> modcall[authorize]: module "mschap" returns noop for request 0
>>> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL
>>> rlm_realm: No such realm "NULL"
>>> modcall[authorize]: module "suffix" returns noop for request 0
>>> rlm_eap: EAP packet type response id 0 length 13
>>> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>>> modcall[authorize]: module "eap" returns updated for request 0
>>> users: Matched entry DEFAULT at line 153
>>> users: Matched entry DEFAULT at line 177
>>> modcall[authorize]: module "files" returns ok for request 0
>>> modcall: leaving group authorize (returns updated) for request 0
>>> rad_check_password: Found Auth-Type pam
>>> auth: type "PAM"
>>> Processing the authenticate section of radiusd.conf
>>> modcall: entering group authenticate for request 0
>>> rlm_pam: Attribute "User-Password" is required for authentication.
>>> modcall[authenticate]: module "pam" returns invalid for request 0
>>> modcall: leaving group authenticate (returns invalid) for request 0
>>> auth: Failed to validate the user.
>>> Delaying request 0 for 1 seconds
>>> Finished request 0
>>> Going to the next request
>>> --- Walking the entire request list ---
>>> Waking up in 1 seconds...
>>> --- Walking the entire request list ---
>>> Waking up in 1 seconds...
>>> --- Walking the entire request list ---
>>> Sending Access-Reject of id 0 to 10.1.22.10 port 2458
>>> Waking up in 4 seconds...
>>>
>>>
>>>
>>> Kevin Bonner wrote:
>>>> On Monday 18 June 2007 16:31:37 Cody Jarrett wrote:
>>>>> I found a few topics on this issue but nothing quite informative enough.
>>>>> I'm trying to get freeradius auth working with pam and peap. When I test
>>>>> my config with radtest, I get Access-accept. When I use a windows XP
>>>>> supplicant with a 3com access point, I get:
>>>>>
>>>>> rlm_pam: Attribute "User-Password" is required for authentication.
>>>>> modcall[authenticate]: module "pam" returns invalid for request 4
>>>>> modcall: leaving group authenticate (returns invalid) for request 4
>>>>> auth: Failed to validate the user.
>>>>>
>>>>> Is the 3com not sending User-Password attributes in the packets, or is
>>>>> something else wrong?
>>>> Run FreeRADIUS in debug mode (radiusd -X) to verify. We cannot guess what
>>>> your NAS/client is sending.
>>>>
>>>> -Kevin
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> -
>>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>> -
>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/usershtml
>>>
>>>
>>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
More information about the Freeradius-Users
mailing list