ttls problem
tevfik
tevfikkiziloren at gmail.com
Thu May 10 12:31:23 CEST 2007
I posted the question to the forum.
Thank you for your help.
SecureW2 (List) wrote:
>
> tevfik,
>
> Post the question in the SecureW2 forum, www.securew2.com/forum/. I will
> get back to you via the forum.
>
> Regards,
>
> Tom
>
> tevfik schreef:
>>> did you configure SecureW2 to allow new connections?
>>>
>>
>> Yes i tried both combinations, nothing is changed.
>>
>> In addition to this when I enter correct username but wrong password, I
>> got
>> similar debug log which i lised below.
>>
>> I wasn't able to see any problem with ldap configuration because it works
>> with radtest command. (That is when i entered correct usrname but wrong
>> password, I got Access-Rejected message. When both of them was true, I
>> got
>> Access-Accepted)
>>
>> Is there a problem with my ldap configuration. Is there any weird message
>> in
>> my debug log?
>>
>> I am dealing with this thing about 20 days. Could anybody tell me whats
>> wrong with it?
>>
>> Thanks in advance:
>>
>> My full debug log: (username was entered true, password was entered false
>> )
>> -------------------------------------------------------------------------------------------------
>> ldap:~ # radiusd -X -A
>> Starting - reading configuration files ...
>> reread_config: reading radiusd.conf
>> Config: including file: /etc/raddb/proxy.conf
>> Config: including file: /etc/raddb/clients.conf
>> Config: including file: /etc/raddb/snmp.conf
>> Config: including file: /etc/raddb/eap.conf
>> Config: including file: /etc/raddb/sql.conf
>> main: prefix = "/usr"
>> main: localstatedir = "/var"
>> main: logdir = "/var/log/radius"
>> main: libdir = "/usr/lib/freeradius"
>> main: radacctdir = "/var/log/radius/radacct"
>> main: hostname_lookups = no
>> main: max_request_time = 30
>> main: cleanup_delay = 5
>> main: max_requests = 1024
>> main: delete_blocked_requests = 0
>> main: port = 0
>> main: allow_core_dumps = no
>> main: log_stripped_names = no
>> main: log_file = "/var/log/radius/radius.log"
>> main: log_auth = no
>> main: log_auth_badpass = no
>> main: log_auth_goodpass = no
>> main: pidfile = "/var/run/radiusd/radiusd.pid"
>> main: user = "radiusd"
>> main: group = "radiusd"
>> main: usercollide = no
>> main: lower_user = "no"
>> main: lower_pass = "no"
>> main: nospace_user = "no"
>> main: nospace_pass = "no"
>> main: checkrad = "/usr/sbin/checkrad"
>> main: proxy_requests = yes
>> proxy: retry_delay = 5
>> proxy: retry_count = 3
>> proxy: synchronous = no
>> proxy: default_fallback = yes
>> proxy: dead_time = 120
>> proxy: post_proxy_authorize = no
>> proxy: wake_all_if_all_dead = no
>> security: max_attributes = 200
>> security: reject_delay = 1
>> security: status_server = no
>> main: debug_level = 0
>> read_config_files: reading dictionary
>> read_config_files: reading naslist
>> read_config_files: reading clients
>> read_config_files: reading realms
>> radiusd: entering modules setup
>> Module: Library search path is /usr/lib/freeradius
>> Module: Loaded exec
>> exec: wait = yes
>> exec: program = "(null)"
>> exec: input_pairs = "request"
>> exec: output_pairs = "(null)"
>> exec: packet_type = "(null)"
>> rlm_exec: Wait=yes but no output defined. Did you mean output=none?
>> Module: Instantiated exec (exec)
>> Module: Loaded expr
>> Module: Instantiated expr (expr)
>> Module: Loaded PAP
>> pap: encryption_scheme = "crypt"
>> Module: Instantiated pap (pap)
>> Module: Loaded CHAP
>> Module: Instantiated chap (chap)
>> Module: Loaded MS-CHAP
>> mschap: use_mppe = yes
>> mschap: require_encryption = no
>> mschap: require_strong = no
>> mschap: with_ntdomain_hack = no
>> mschap: passwd = "(null)"
>> mschap: authtype = "MS-CHAP"
>> mschap: ntlm_auth = "(null)"
>> Module: Instantiated mschap (mschap)
>> Module: Loaded System
>> unix: cache = no
>> unix: passwd = "(null)"
>> unix: shadow = "(null)"
>> unix: group = "(null)"
>> unix: radwtmp = "/var/log/radius/radwtmp"
>> unix: usegroup = no
>> unix: cache_reload = 600
>> Module: Instantiated unix (unix)
>> Module: Loaded LDAP
>> ldap: server = "ldap.anadolu.edu.tr"
>> ldap: port = 389
>> ldap: net_timeout = 1
>> ldap: timeout = 4
>> ldap: timelimit = 3
>> ldap: identity = ""
>> ldap: tls_mode = no
>> ldap: start_tls = no
>> ldap: tls_cacertfile = "(null)"
>> ldap: tls_cacertdir = "(null)"
>> ldap: tls_certfile = "(null)"
>> ldap: tls_keyfile = "(null)"
>> ldap: tls_randfile = "(null)"
>> ldap: tls_require_cert = "allow"
>> ldap: password = ""
>> ldap: basedn = "ou=people,dc=anadolu,dc=edu,dc=tr"
>> ldap: filter = "(uid=%u)"
>> ldap: base_filter = "(objectclass=radiusprofile)"
>> ldap: default_profile = "(null)"
>> ldap: profile_attribute = "(null)"
>> ldap: password_header = "(null)"
>> ldap: password_attribute = "(null)"
>> ldap: access_attr = "(null)"
>> ldap: groupname_attribute = "cn"
>> ldap: groupmembership_filter =
>> "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
>> ldap: groupmembership_attribute = "(null)"
>> ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap"
>> ldap: ldap_debug = 0
>> ldap: ldap_connections_number = 5
>> ldap: compare_check_items = no
>> ldap: access_attr_used_for_allow = yes
>> ldap: do_xlat = yes
>> ldap: edir_account_policy_check = yes
>> ldap: set_auth_type = yes
>> rlm_ldap: Registering ldap_groupcmp for Ldap-Group
>> rlm_ldap: Creating new attribute ldap_1x-Ldap-Group
>> rlm_ldap: Registering ldap_groupcmp for ldap_1x-Ldap-Group
>> rlm_ldap: Registering ldap_xlat with xlat_name ldap_1x
>> rlm_ldap: Over-riding set_auth_type, as we're not listed in the
>> "authenticate" section.
>> rlm_ldap: reading ldap<->radius mappings from file
>> /etc/raddb/ldap.attrmap
>> rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
>> rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
>> rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
>> rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
>> rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
>> rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
>> rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
>> rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
>> rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
>> rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
>> rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
>> rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
>> rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
>> rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
>> rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
>> rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
>> rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
>> rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
>> rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS
>> Framed-Compression
>> rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
>> rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
>> rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
>> rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
>> rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
>> rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
>> rlm_ldap: LDAP radiusClass mapped to RADIUS Class
>> rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
>> rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
>> rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS
>> Termination-Action
>> rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
>> rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
>> rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
>> rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
>> Framed-AppleTalk-Link
>> rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
>> Framed-AppleTalk-Network
>> rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
>> Framed-AppleTalk-Zone
>> rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
>> rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
>> conns: 0x800d0420
>> Module: Instantiated ldap (ldap_1x)
>> Module: Loaded eap
>> eap: default_eap_type = "ttls"
>> eap: timer_expire = 60
>> eap: ignore_unknown_eap_types = no
>> eap: cisco_accounting_username_bug = no
>> rlm_eap: Loaded and initialized type md5
>> rlm_eap: Loaded and initialized type leap
>> gtc: challenge = "Password: "
>> gtc: auth_type = "PAP"
>> rlm_eap: Loaded and initialized type gtc
>> tls: rsa_key_exchange = no
>> tls: dh_key_exchange = yes
>> tls: rsa_key_length = 512
>> tls: dh_key_length = 512
>> tls: verify_depth = 0
>> tls: CA_path = "(null)"
>> tls: pem_file_type = yes
>> tls: private_key_file = "/etc/raddb/certs/server_keycert.pem"
>> tls: certificate_file = "/etc/raddb/certs/server_keycert.pem"
>> tls: CA_file = "/etc/raddb/certs/cacert.pem"
>> tls: private_key_password = "1234"
>> tls: dh_file = "/etc/raddb/certs/dh"
>> tls: random_file = "/etc/raddb/certs/random"
>> tls: fragment_size = 1024
>> tls: include_length = yes
>> tls: check_crl = no
>> tls: check_cert_cn = "(null)"
>> rlm_eap_tls: Loading the certificate file as a chain
>> rlm_eap: Loaded and initialized type tls
>> ttls: default_eap_type = "md5"
>> ttls: copy_request_to_tunnel = yes
>> ttls: use_tunneled_reply = no
>> rlm_eap: Loaded and initialized type ttls
>> mschapv2: with_ntdomain_hack = no
>> rlm_eap: Loaded and initialized type mschapv2
>> Module: Instantiated eap (eap)
>> Module: Loaded preprocess
>> preprocess: huntgroups = "/etc/raddb/huntgroups"
>> preprocess: hints = "/etc/raddb/hints"
>> preprocess: with_ascend_hack = no
>> preprocess: ascend_channels_per_line = 23
>> preprocess: with_ntdomain_hack = no
>> preprocess: with_specialix_jetstream_hack = no
>> preprocess: with_cisco_vsa_hack = no
>> Module: Instantiated preprocess (preprocess)
>> Module: Loaded realm
>> realm: format = "suffix"
>> realm: delimiter = "@"
>> realm: ignore_default = yes
>> realm: ignore_null = yes
>> Module: Instantiated realm (suffix)
>> Module: Loaded files
>> files: usersfile = "/etc/raddb/users"
>> files: acctusersfile = "/etc/raddb/acct_users"
>> files: preproxy_usersfile = "/etc/raddb/preproxy_users"
>> files: compat = "no"
>> Module: Instantiated files (files)
>> Module: Loaded Acct-Unique-Session-Id
>> acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
>> Client-IP-Address, NAS-Port"
>> Module: Instantiated acct_unique (acct_unique)
>> Module: Loaded detail
>> detail: detailfile =
>> "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
>> detail: detailperm = 384
>> detail: dirperm = 493
>> detail: locking = no
>> Module: Instantiated detail (detail)
>> Module: Loaded radutmp
>> radutmp: filename = "/var/log/radius/radutmp"
>> radutmp: username = "%{User-Name}"
>> radutmp: case_sensitive = yes
>> radutmp: check_with_nas = yes
>> radutmp: perm = 384
>> radutmp: callerid = yes
>> Module: Instantiated radutmp (radutmp)
>> Listening on authentication *:1812
>> Listening on accounting *:1813
>> Ready to process requests.
>> rad_recv: Access-Request packet from host 10.10.7.203:1645, id=146,
>> length=139
>> User-Name = "tkiziloren"
>> Framed-MTU = 1400
>> Called-Station-Id = "0017.0e85.f190"
>> Calling-Station-Id = "0011.2fb9.d08b"
>> Service-Type = Login-User
>> Message-Authenticator = 0x4bf1be37ab5fc1598c68bd249777d10d
>> EAP-Message = 0x0202000f01746b697a696c6f72656e
>> NAS-Port-Type = Wireless-802.11
>> NAS-Port = 322
>> NAS-IP-Address = 10.10.7.203
>> NAS-Identifier = "testbaum"
>> Processing the authorize section of radiusd.conf
>> modcall: entering group authorize for request 0
>> modcall[authorize]: module "preprocess" returns ok for request 0
>> modcall[authorize]: module "chap" returns noop for request 0
>> modcall[authorize]: module "mschap" returns noop for request 0
>> rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to
>> config.
>> modcall[authorize]: module "suffix" returns noop for request 0
>> rlm_eap: EAP packet type response id 2 length 15
>> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>> modcall[authorize]: module "eap" returns updated for request 0
>> users: Matched entry DEFAULT at line 29
>> modcall[authorize]: module "files" returns ok for request 0
>> rlm_ldap: - authorize
>> rlm_ldap: performing user authorization for tkiziloren
>> radius_xlat: '(uid=tkiziloren)'
>> radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr'
>> rlm_ldap: ldap_get_conn: Checking Id: 0
>> rlm_ldap: ldap_get_conn: Got Id: 0
>> rlm_ldap: attempting LDAP reconnection
>> rlm_ldap: (re)connect to ldap.anadolu.edu.tr:389, authentication 0
>> rlm_ldap: bind as / to ldap.anadolu.edu.tr:389
>> rlm_ldap: waiting for bind result ...
>> rlm_ldap: Bind was successful
>> rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with
>> filter (uid=tkiziloren)
>> rlm_ldap: looking for check items in directory...
>> rlm_ldap: looking for reply items in directory...
>> rlm_ldap: user tkiziloren authorized to use remote access
>> rlm_ldap: ldap_release_conn: Release Id: 0
>> modcall[authorize]: module "ldap_1x" returns ok for request 0
>> modcall: leaving group authorize (returns updated) for request 0
>> rad_check_password: Found Auth-Type EAP
>> auth: type "EAP"
>> Processing the authenticate section of radiusd.conf
>> modcall: entering group authenticate for request 0
>> rlm_eap: EAP Identity
>> rlm_eap: processing type tls
>> rlm_eap_tls: Initiate
>> rlm_eap_tls: Start returned 1
>> modcall[authenticate]: module "eap" returns handled for request 0
>> modcall: leaving group authenticate (returns handled) for request 0
>> Sending Access-Challenge of id 146 to 10.10.7.203 port 1645
>> EAP-Message = 0x010300061520
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0x0aacb6009ffcc2e6b40b7487d9b49dce
>> Finished request 0
>> Going to the next request
>> --- Walking the entire request list ---
>> Waking up in 6 seconds...
>> rad_recv: Access-Request packet from host 10.10.7.203:1645, id=147,
>> length=202
>> User-Name = "tkiziloren"
>> Framed-MTU = 1400
>> Called-Station-Id = "0017.0e85.f190"
>> Calling-Station-Id = "0011.2fb9.d08b"
>> Service-Type = Login-User
>> Message-Authenticator = 0xec986e334fed0be253f43e2461d77e42
>> EAP-Message =
>> 0x0203003c158000000032160301002d01000029030146cbafcad15f26ee9c399c30942cb9a40c438dfa3f0aeb13b9b68e7fd7fa6e64000002000a0100
>> NAS-Port-Type = Wireless-802.11
>> NAS-Port = 322
>> State = 0x0aacb6009ffcc2e6b40b7487d9b49dce
>> NAS-IP-Address = 10.10.7.203
>> NAS-Identifier = "testbaum"
>> Processing the authorize section of radiusd.conf
>> modcall: entering group authorize for request 1
>> modcall[authorize]: module "preprocess" returns ok for request 1
>> modcall[authorize]: module "chap" returns noop for request 1
>> modcall[authorize]: module "mschap" returns noop for request 1
>> rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to
>> config.
>> modcall[authorize]: module "suffix" returns noop for request 1
>> rlm_eap: EAP packet type response id 3 length 60
>> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>> modcall[authorize]: module "eap" returns updated for request 1
>> users: Matched entry DEFAULT at line 29
>> modcall[authorize]: module "files" returns ok for request 1
>> rlm_ldap: - authorize
>> rlm_ldap: performing user authorization for tkiziloren
>> radius_xlat: '(uid=tkiziloren)'
>> radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr'
>> rlm_ldap: ldap_get_conn: Checking Id: 0
>> rlm_ldap: ldap_get_conn: Got Id: 0
>> rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with
>> filter (uid=tkiziloren)
>> rlm_ldap: looking for check items in directory...
>> rlm_ldap: looking for reply items in directory...
>> rlm_ldap: user tkiziloren authorized to use remote access
>> rlm_ldap: ldap_release_conn: Release Id: 0
>> modcall[authorize]: module "ldap_1x" returns ok for request 1
>> modcall: leaving group authorize (returns updated) for request 1
>> rad_check_password: Found Auth-Type EAP
>> auth: type "EAP"
>> Processing the authenticate section of radiusd.conf
>> modcall: entering group authenticate for request 1
>> rlm_eap: Request found, released from the list
>> rlm_eap: EAP/ttls
>> rlm_eap: processing type ttls
>> rlm_eap_ttls: Authenticate
>> rlm_eap_tls: processing TLS
>> rlm_eap_tls: Length Included
>> eaptls_verify returned 11
>> (other): before/accept initialization
>> TLS_accept: before/accept initialization
>> rlm_eap_tls: <<< TLS 1.0 Handshake [length 002d], ClientHello
>> TLS_accept: SSLv3 read client hello A
>> rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
>> TLS_accept: SSLv3 write server hello A
>> rlm_eap_tls: >>> TLS 1.0 Handshake [length 05e7], Certificate
>> TLS_accept: SSLv3 write certificate A
>> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
>> TLS_accept: SSLv3 write server done A
>> TLS_accept: SSLv3 flush data
>> TLS_accept:error in SSLv3 read client certificate A
>> In SSL Handshake Phase
>> In SSL Accept mode
>> eaptls_process returned 13
>> modcall[authenticate]: module "eap" returns handled for request 1
>> modcall: leaving group authenticate (returns handled) for request 1
>> Sending Access-Challenge of id 147 to 10.10.7.203 port 1645
>> EAP-Message =
>> 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
>> EAP-Message =
>> 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
>> EAP-Message =
>> 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
>> EAP-Message =
>> 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
>> EAP-Message = 0x3130303530373130333734345a30818f310b30090603
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0x2c09c8f35ddc35ecd609188a17165621
>> Finished request 1
>> Going to the next request
>> Waking up in 6 seconds...
>> rad_recv: Access-Request packet from host 10.10.7.203:1645, id=148,
>> length=148
>> User-Name = "tkiziloren"
>> Framed-MTU = 1400
>> Called-Station-Id = "0017.0e85.f190"
>> Calling-Station-Id = "0011.2fb9.d08b"
>> Service-Type = Login-User
>> Message-Authenticator = 0x9b4e281f16c2c5d3cf691e6e195bea68
>> EAP-Message = 0x020400061500
>> NAS-Port-Type = Wireless-802.11
>> NAS-Port = 322
>> State = 0x2c09c8f35ddc35ecd609188a17165621
>> NAS-IP-Address = 10.10.7.203
>> NAS-Identifier = "testbaum"
>> Processing the authorize section of radiusd.conf
>> modcall: entering group authorize for request 2
>> modcall[authorize]: module "preprocess" returns ok for request 2
>> modcall[authorize]: module "chap" returns noop for request 2
>> modcall[authorize]: module "mschap" returns noop for request 2
>> rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to
>> config.
>> modcall[authorize]: module "suffix" returns noop for request 2
>> rlm_eap: EAP packet type response id 4 length 6
>> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>> modcall[authorize]: module "eap" returns updated for request 2
>> users: Matched entry DEFAULT at line 29
>> modcall[authorize]: module "files" returns ok for request 2
>> rlm_ldap: - authorize
>> rlm_ldap: performing user authorization for tkiziloren
>> radius_xlat: '(uid=tkiziloren)'
>> radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr'
>> rlm_ldap: ldap_get_conn: Checking Id: 0
>> rlm_ldap: ldap_get_conn: Got Id: 0
>> rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with
>> filter (uid=tkiziloren)
>> rlm_ldap: looking for check items in directory...
>> rlm_ldap: looking for reply items in directory...
>> rlm_ldap: user tkiziloren authorized to use remote access
>> rlm_ldap: ldap_release_conn: Release Id: 0
>> modcall[authorize]: module "ldap_1x" returns ok for request 2
>> modcall: leaving group authorize (returns updated) for request 2
>> rad_check_password: Found Auth-Type EAP
>> auth: type "EAP"
>> Processing the authenticate section of radiusd.conf
>> modcall: entering group authenticate for request 2
>> rlm_eap: Request found, released from the list
>> rlm_eap: EAP/ttls
>> rlm_eap: processing type ttls
>> rlm_eap_ttls: Authenticate
>> rlm_eap_tls: processing TLS
>> rlm_eap_tls: Received EAP-TLS ACK message
>> rlm_eap_tls: ack handshake fragment handler
>> eaptls_verify returned 1
>> eaptls_process returned 13
>> modcall[authenticate]: module "eap" returns handled for request 2
>> modcall: leaving group authenticate (returns handled) for request 2
>> Sending Access-Challenge of id 148 to 10.10.7.203 port 1645
>> EAP-Message =
>> 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
>> EAP-Message =
>> 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
>> EAP-Message =
>> 0x4b77db5093871b2203bf2271cb97b98cc169c03f4f67d7a01261d971dfddc176cce3a42e1dd1e37037060a528db7e8481722e222549b882a93cfa582a29df0f1b401a28e197772410a1f1016030100040e000000
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xb63cf9e5375c651683e69b8c2d8543fc
>> Finished request 2
>> Going to the next request
>> Waking up in 6 seconds...
>> --- Walking the entire request list ---
>> Cleaning up request 0 ID 146 with timestamp 4642d682
>> Cleaning up request 1 ID 147 with timestamp 4642d682
>> Cleaning up request 2 ID 148 with timestamp 4642d682
>> Nothing to do. Sleeping until we see a request.
>>
>>
>>
>>
>> A.L.M.Buxey wrote:
>>
>>> Hi,
>>>
>>>
>>>> However when i try to perform same task by using securew2 on XP client,
>>>> it
>>>> always shows "attempting to authenticate",
>>>>
>>> did you configure SecureW2 to allow new connections?
>>>
>>> alan
>>> -
>>> List info/subscribe/unsubscribe? See
>>> http://www.freeradius.org/list/users.html
>>>
>>>
>>>
>>
>>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
--
View this message in context: http://www.nabble.com/ttls-problem-tf3717596.html#a10410860
Sent from the FreeRadius - User mailing list archive at Nabble.com.
More information about the Freeradius-Users
mailing list