Freeradius 1.1.7 no DB handles
steven meyer
kristin.schiffer at gmx.de
Fri Nov 9 08:14:26 CET 2007
I have searched now for several weeks, but do not find a solution:
Installed freeradius 1.1.7 on suse
configured mysql on the same server
I can start radiusd fine, I can login into nas, but I want accounting put
into mysql and that just does not work.
My DB-tables are empty, just accounting should be put into it. I do not need
anything in usergroup for accounting etc, or do I?
radiusd -X | grep sql :
Config: including file: /usr/local/etc/raddb/sql.conf
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "root"
sql: password = ""
sql: radius_db = "radiusLOG"
sql: nas_table = "nas"
sql: sqltrace = no
sql: sqltracefile = "/rzf/protokolle/radiusd/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op
FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER
BY id"
sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op
FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER
BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = " UPDATE radacct SET
FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime =
'%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Gigawords:-0}' << 32 |
'%{Acct-Input-Octets:-0}', AcctOutputOctets =
'%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}' WHERE AcctSessionId =
'%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_update_query_alt = " INSERT INTO radacct
(AcctSessionId, AcctUniqueId, UserName, Realm,
NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctSessionTime, AcctAuthentic, ConnectInfo_start,
AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND),
'%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Acct-Input-Gigawords:
-0}' << 32 | '%{Acct-Input-Octets:-0}',
'%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{X-Ascend-Session-Svr-Key}')"
sql: accounting_start_query = " INSERT INTO radacct
(AcctSessionId, AcctUniqueId, UserName, Realm,
NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId,
AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay,
XAscendSessionSvrKey) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%
{Framed-Protocol}', '%{Framed-IP-Address}',
'%{Acct-Delay-Time:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S',
AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}'
WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = " UPDATE radacct SET
AcctStopTime = '%S', AcctSessionTime =
'%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Gigawords:-0}' << 32 |
'%{Acct-Input-Octets:-0}', AcctOutputOctets =
'%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}', AcctTerminateCause =
'%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time:-0}', ConnectInfo_stop = '%{Connect-Info}'
WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName
= '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = " INSERT INTO radacct
(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress,
NASPortId, NASPortType, AcctStartTime, AcctStopTime,
AcctSessionTime, AcctAuthentic, ConnectInfo_start,
ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause,
ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay,
AcctStopDelay) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL
(%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND),
'%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Connect-Info}', '%{Acct-Input-Gigawo
rds:-0}' << 32 | '%{Acct-Input-Octets:-0}',
'%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{Acct-Delay-Time:-0}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress,
CallingStationId, FramedProtocol FROM radacct
WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
sql: postauth_query = "INSERT into radpostauth (user, pass, reply, date)
values ('%{User-Name}', '%{User-Password:-Chap-Password}',
'%{reply:Packet-Type}', NOW())"
sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to root at localhost:/radiusLOG
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
rlm_sql (sql): sql_set_user escaped user --> 'kristin'
rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0
modcall[accounting]: module "sql" returns fail for request 1
rlm_sql (sql): sql_set_user escaped user --> 'kristin'
rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0
modcall[accounting]: module "sql" returns fail for request 2
rlm_sql (sql): sql_set_user escaped user --> 'kristin'
rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0
modcall[accounting]: module "sql" returns fail for request 3
rlm_sql (sql): sql_set_user escaped user --> 'kristin'
rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0
modcall[accounting]: module "sql" returns fail for request 4
rlm_sql (sql): sql_set_user escaped user --> 'kristin'
rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0
modcall[accounting]: module "sql" returns fail for request 5
rlm_sql (sql): sql_set_user escaped user --> 'kristin'
rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0
modcall[accounting]: module "sql" returns fail for request 6
rlm_sql (sql): sql_set_user escaped user --> 'kristin'
rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0
modcall[accounting]: module "sql" returns fail for request 7
....
I tried to create and put sqltrace into my db. That was no problem at all.
But whats the Problem of radiusd? It connects to DB, but cannot insert when
accounting-Data comes in!? I do not know where else to look at. Please help
me!
--
View this message in context: http://www.nabble.com/Freeradius-1.1.7-no-DB-handles-tf4757305.html#a13604314
Sent from the FreeRadius - User mailing list archive at Nabble.com.
More information about the Freeradius-Users
mailing list