radtest seems to fail out of the box

[Dan Gahlinger]

Ok, Al, can you explain or help with this.

just to appease you, I unpacked free radius, out of the box,
changed a single line in "server" as such:
127.0.0.1       testing123             3

ran radtest using a testuser local account:

radtest testuser 1234 127.0.0.1 10 testing123

it failed, radtest shows:
Sending Access-Request of id 90 to 127.0.0.1 port 1812
        User-Name = "testuser"
        User-Password = "1234"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 10
rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=90, length=20

Radiusd -X shows:
/usr/sbin/radiusd -X
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc/raddb/proxy.conf
Config:   including file: /etc/raddb/clients.conf
Config:   including file: /etc/raddb/snmp.conf
Config:   including file: /etc/raddb/eap.conf
Config:   including file: /etc/raddb/sql.conf
 main: prefix = "/usr"
 main: localstatedir = "/var"
 main: logdir = "/var/log/radius"
 main: libdir = "/usr/lib/freeradius"
 main: radacctdir = "/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/radiusd/radiusd.pid"
 main: user = "radiusd"
 main: group = "radiusd"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec 
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec) 
Module: Loaded expr 
Module: Instantiated expr (expr) 
Module: Loaded PAP 
 pap: encryption_scheme = "crypt"
 pap: auto_header = yes
Module: Instantiated pap (pap) 
Module: Loaded CHAP 
Module: Instantiated chap (chap) 
Module: Loaded MS-CHAP 
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap) 
Module: Loaded System 
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix) 
Module: Loaded eap 
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap) 
Module: Loaded preprocess 
 preprocess: huntgroups = "/etc/raddb/huntgroups"
 preprocess: hints = "/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
 preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess) 
Module: Loaded realm 
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix) 
Module: Loaded files 
 files: usersfile = "/etc/raddb/users"
 files: acctusersfile = "/etc/raddb/acct_users"
 files: preproxy_usersfile = "/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files) 
Module: Loaded Acct-Unique-Session-Id 
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique) 
Module: Loaded detail 
 detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail) 
Module: Loaded radutmp 
 radutmp: filename = "/var/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp) 
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:32773, id=90, length=60
        User-Name = "testuser"
        User-Password = "1234"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 10
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched entry DEFAULT at line 155
  modcall[authorize]: module "files" returns ok for request 0
rlm_pap: WARNING! No "known good" password found for the user.  Authentication may fail because of this.
  modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
  rad_check_password:  Found Auth-Type System
auth: type "System"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_unix: [testuser]: invalid password
  modcall[authenticate]: module "unix" returns reject for request 0
modcall: leaving group authenticate (returns reject) for request 0
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 90 to 127.0.0.1 port 32773
Waking up in 4 seconds...

the password is valid, as a local SSH using the same information works.

And one other oddity, when using users with "hardended" passwords like say "test@"
radtest and radiusd -X will show the password as "test2", whether quotes are used or not.

is this normal? and why does the radtest fail?

no other configurations or files where changed. everything is default.

_________________________________________________________________
Are you ready for Windows Live Messenger Beta 8.5 ? Get the latest for free today!
http://entertainment.sympatico.msn.ca/WindowsLiveMessenger
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20071128/03f6e95a/attachment.html>