Windows XP caches uid and password

[Sergio Belkin]

Hi,
I have this problem, I have a radiusd configured with eap-ttls. It
worked fine with windows clients when uses "radius plain users" (not
from unix nor ldap). When I enable ldap, Windows insists in using the
test user i.e. it doesnt show me the login dialog box again. I tried
rebooting windows and restarting freeradius para it doesn't worked
yet. is there a way from radius for force to windows to renegotiate
session?

Debugging output:

Cleaning up request 3 ID 149 with timestamp 470f75f1
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 10.30.1.151:1030, id=150, length=98
        User-Name = "test"
        Calling-Station-Id = "00-0e-35-bf-51-18"
        EAP-Message = 0x020100090174657374
        Framed-MTU = 1287
        NAS-IP-Address = 192.168.1.1
        NAS-Port = 0
        NAS-Port-Type = Wireless-802.11
        Message-Authenticator = 0x0ed6c4d76237da8d14c7a6fab645acb0
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
  modcall[authorize]: module "preprocess" returns ok for request 4
  modcall[authorize]: module "chap" returns noop for request 4
  modcall[authorize]: module "mschap" returns noop for request 4
    rlm_realm: No '@' in User-Name = "test", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 4
  rlm_eap: EAP packet type response id 1 length 9
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 4
  modcall[authorize]: module "files" returns notfound for request 4
rlm_ldap: - authorize
rlm_ldap: performing user authorization for test
radius_xlat:  '(uid=test)'
radius_xlat:  'ou=people,dc=palermo,dc=edu'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=people,dc=palermo,dc=edu, with
filter (uid=test)
request done: ld 0x5555557c9300 msgid 6
rlm_ldap: object not found or got ambiguous search result
rlm_ldap: search failed
rlm_ldap: ldap_release_conn: Release Id: 0
  modcall[authorize]: module "ldap" returns notfound for request 4
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
  modcall[authorize]: module "pap" returns noop for request 4
modcall: leaving group authorize (returns updated) for request 4
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 4
modcall: leaving group authenticate (returns handled) for request 4
Sending Access-Challenge of id 150 to 10.30.1.151 port 1030
        EAP-Message = 0x010200061520
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x512563ac40f384cfa352c98a7960069d
Finished request 4
Going to the next request


Thanks in advance!

-- 
--
Sergio Belkin -