Intel Proset Wireless Client does not process RFC3580 Attributes.

[tnt at kalik.co.yu]

Read instructions in eap.conf. You most likely need to set:

use_tunneled_reply = yes

in peap section.

Ivan Kalik
Kalik Informatika ISP


Dana 18/9/2007, "Terry Pelley" <Terry.Pelley at ocdsb.ca> piše:

>FreeRADIUS Version 1.1.3-r0.1.2 (Upgrade to 1.1.7 is Pending)
>
>
>I am running FreeRADIUS to authenticate wireless users on a bunch of Cisco
>AP1231's. My wireless supplicants are running a combination of the
>standard Windows XP client which works fine and the Intel Proset Client
>which is causing problems.
>
>The Radius setup is for PEAP/MSChapv2 and each user has the following
>attributes assigned.
>
>Tunnel-Type = "VLAN"
>Tunnel-Medium-Type = "IEEE-802"
>Tunnel-Private-Group-ID = "X" (Where X is the assigned VLAN Number)
>
>The Proset Clients do manage to eventually authenticate, but the above
>attributes do not appear to get processed.  I think this is happening
>because the Proset Client sends the User-Name as "anonymous" and as there
>is no "anonymous" user defined, the attributes do not get applied.
>
>How do I get the User-Name to be sent correctly?
>
>Thanks in advance.
>
>
>Terry Pelley
>Network Analyst
>Business and Learning Technologies
>Ottawa-Carleton District School Board
>
>terry.pelley at ocdsb.ca
>
>
>