EAP (PEAP) problem with MS Win XP

[Donny Jekels]

Wayne, hoekom doen jy nie jou EAP-PEAP authentication van 'n linux box af
nie? jy sal jou lewe soveel makliker maak.

On 9/20/07, WAYNE VANDERMERWE <WAYNE.VANDERMERWE at impilo.ecprov.gov.za>
wrote:
>
>  Hi,
>
> I have configure freeradius ver 1.1.5 on an MS XP Box. I need to
> authenticate and
> authorize MS Windows XP clients (people connect to Access Point manage by
> an
> 3Com wireless switch). I have set up the windos box's for EAP-PEAP and
> MSCHAP
>
> Here is the resaults from the debug
>
> Starting - reading configuration files ...
> reread_config:  reading radiusd.conf
> Config:   including file: ../etc/raddb/proxy.conf
> Config:   including file: ../etc/raddb/clients.conf
> Config:   including file: ../etc/raddb/snmp.conf
> Config:   including file: ../etc/raddb/eap.conf
>  main: prefix = ".."
>  main: localstatedir = "../var"
>  main: logdir = "../var/log/radius"
>  main: libdir = "../lib"
>  main: radacctdir = "../var/log/radius/radacct"
>  main: hostname_lookups = no
>  main: max_request_time = 30
>  main: cleanup_delay = 5
>  main: max_requests = 1024
>  main: delete_blocked_requests = 0
>  main: port = 0
>  main: allow_core_dumps = no
>  main: log_stripped_names = yes
>  main: log_file = "../var/log/radius/radius.log"
>  main: log_auth = yes
>  main: log_auth_badpass = yes
>  main: log_auth_goodpass = yes
>  main: pidfile = "../var/run/radiusd/radiusd.pid"
>  main: user = "(null)"
>  main: group = "(null)"
>  main: usercollide = no
>  main: lower_user = "no"
>  main: lower_pass = "no"
>  main: nospace_user = "no"
>  main: nospace_pass = "no"
>  main: checkrad = "../sbin/checkrad"
>  main: proxy_requests = yes
>  proxy: retry_delay = 5
>  proxy: retry_count = 3
>  proxy: synchronous = no
>  proxy: default_fallback = yes
>  proxy: dead_time = 120
>  proxy: post_proxy_authorize = no
>  proxy: wake_all_if_all_dead = no
>  security: max_attributes = 200
>  security: reject_delay = 1
>  security: status_server = no
>  main: debug_level = 0
> read_config_files:  reading dictionary
> read_config_files:  reading naslist
> Using deprecated naslist file.  Support for this will go away soon.
> read_config_files:  reading clients
> read_config_files:  reading realms
> radiusd:  entering modules setup
> Module: Library search path is ../lib
> Module: Loaded exec
>  exec: wait = yes
>  exec: program = "(null)"
>  exec: input_pairs = "request"
>  exec: output_pairs = "(null)"
>  exec: packet_type = "(null)"
> rlm_exec: Wait=yes but no output defined. Did you mean output=none?
> Module: Instantiated exec (exec)
> Module: Loaded expr
> Module: Instantiated expr (expr)
> Module: Loaded PAP
>  pap: encryption_scheme = "crypt"
>  pap: auto_header = yes
> Module: Instantiated pap (pap)
> Module: Loaded CHAP
> Module: Instantiated chap (chap)
> Module: Loaded MS-CHAP
>  mschap: use_mppe = yes
>  mschap: require_encryption = no
>  mschap: require_strong = no
>  mschap: with_ntdomain_hack = yes
>  mschap: passwd = "(null)"
>  mschap: ntlm_auth = "(null)"
> Module: Instantiated mschap (mschap)
> Module: Loaded System
>  unix: cache = no
>  unix: passwd = "(null)"
>  unix: shadow = "(null)"
>  unix: group = "(null)"
>  unix: radwtmp = "../var/log/radius/radwtmp"
>  unix: usegroup = no
>  unix: cache_reload = 600
> Module: Instantiated unix (unix)
> Module: Loaded eap
>  eap: default_eap_type = "tls"
>  eap: timer_expire = 60
>  eap: ignore_unknown_eap_types = no
>  eap: cisco_accounting_username_bug = no
> rlm_eap: Loaded and initialized type md5
> rlm_eap: Loaded and initialized type leap
>  gtc: challenge = "Password: "
>  gtc: auth_type = "PAP"
> rlm_eap: Loaded and initialized type gtc
>  tls: rsa_key_exchange = no
>  tls: dh_key_exchange = yes
>  tls: rsa_key_length = 512
>  tls: dh_key_length = 512
>  tls: verify_depth = 0
>  tls: CA_path = "(null)"
>  tls: pem_file_type = yes
>  tls: private_key_file =
> "../etc/raddb/certs/FreeRADIUS.net/DemoCerts/FreeRADIUS.net-Server.pem"
>  tls: certificate_file =
> "../etc/raddb/certs/FreeRADIUS.net/DemoCerts/FreeRADIUS.net-Server.crt"
>  tls: CA_file =
> "../etc/raddb/certs/FreeRADIUS.net/DemoCerts/FreeRADIUS.net-CA.crt"
>  tls: private_key_password = "demo"
>  tls: dh_file = "../etc/raddb/certs/FreeRADIUS.net/DemoCerts/dh"
>  tls: random_file = "../etc/raddb/certs/FreeRADIUS.net/DemoCerts/random"
>  tls: fragment_size = 1024
>  tls: include_length = yes
>  tls: check_crl = no
>  tls: check_cert_cn = "%{User-Name}"
>  tls: cipher_list = "(null)"
>  tls: check_cert_issuer = "(null)"
> rlm_eap_tls: Loading the certificate file as a chain
> rlm_eap: Loaded and initialized type tls
>  ttls: default_eap_type = "md5"
>  ttls: copy_request_to_tunnel = yes
>  ttls: use_tunneled_reply = yes
> rlm_eap: Loaded and initialized type ttls
>  peap: default_eap_type = "mschapv2"
>  peap: copy_request_to_tunnel = no
>  peap: use_tunneled_reply = no
>  peap: proxy_tunneled_request_as_eap = yes
> rlm_eap: Loaded and initialized type peap
>  mschapv2: with_ntdomain_hack = no
> rlm_eap: Loaded and initialized type mschapv2
> Module: Instantiated eap (eap)
> Module: Loaded preprocess
>  preprocess: huntgroups = "../etc/raddb/huntgroups"
>  preprocess: hints = "../etc/raddb/hints"
>  preprocess: with_ascend_hack = no
>  preprocess: ascend_channels_per_line = 23
>  preprocess: with_ntdomain_hack = yes
>  preprocess: with_specialix_jetstream_hack = no
>  preprocess: with_cisco_vsa_hack = no
>  preprocess: with_alvarion_vsa_hack = no
> Module: Instantiated preprocess (preprocess)
> Module: Loaded detail
>  detail: detailfile =
> "../var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d.log"
>  detail: detailperm = 511
>  detail: dirperm = 493
>  detail: locking = no
> Module: Instantiated detail (auth_log)
> Module: Loaded realm
>  realm: format = "suffix"
>  realm: delimiter = "@"
>  realm: ignore_default = no
>  realm: ignore_null = no
> Module: Instantiated realm (suffix)
> Module: Loaded files
>  files: usersfile = "../etc/raddb/users"
>  files: acctusersfile = "../etc/raddb/acct_users"
>  files: preproxy_usersfile = "../etc/raddb/preproxy_users"
>  files: compat = "no"
> Module: Instantiated files (files)
> Module: Loaded Acct-Unique-Session-Id
>  acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
> Client-IP-Address, NAS-Port"
> Module: Instantiated acct_unique (acct_unique)
>  detail: detailfile =
> "../var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d.log"
>  detail: detailperm = 511
>  detail: dirperm = 493
>  detail: locking = no
> Module: Instantiated detail (detail)
> Module: Loaded Counter
>  counter: filename = "../etc/raddb/db.daily"
>  counter: key = "User-Name"
>  counter: reset = "daily"
>  counter: count-attribute = "Acct-Session-Time"
>  counter: counter-name = "Daily-Session-Time"
>  counter: check-name = "Max-Daily-Session"
>  counter: allowed-servicetype = "Framed-User"
>  counter: cache-size = 5000
> rlm_counter: Counter attribute Daily-Session-Time is number 1830
> rlm_counter: Current Time: 1190188203 [2007-09-19 09:50:03], Next reset
> 1190239200 [2007-09-20 00:00:00]
> Module: Instantiated counter (daily)
> Module: Loaded radutmp
>  radutmp: filename = "../var/log/radius/radutmp"
>  radutmp: username = "%{User-Name}"
>  radutmp: case_sensitive = yes
>  radutmp: check_with_nas = yes
>  radutmp: perm = 511
>  radutmp: callerid = yes
> Module: Instantiated radutmp (radutmp)
>  detail: detailfile =
> "../var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d.log"
>  detail: detailperm = 511
>  detail: dirperm = 493
>  detail: locking = no
> Module: Instantiated detail (pre_proxy_log)
>  detail: detailfile =
> "../var/log/radius/radacct/%{Client-IP-Address}/post-proxy-detail-%Y%m%d.log"
>  detail: detailperm = 511
>  detail: dirperm = 493
>  detail: locking = no
> Module: Instantiated detail (post_proxy_log)
>  detail: detailfile =
> "../var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d.log"
>  detail: detailperm = 511
>  detail: dirperm = 493
>  detail: locking = no
> Module: Instantiated detail (reply_log)
> Listening on authentication *:1812
> Listening on accounting *:1813
> Ready to process requests.
>
>
> rad_recv: Access-Request packet from host 10.219.157.232:20000, id=63,
> length=149
>  NAS-Port-Id = "2/1"
>  Calling-Station-Id = "00-0F-CB-FA-D4-63"
>  Called-Station-Id = "00-18-6E-95-A2-C0:ELHC"
>  Service-Type = Framed-User
>  EAP-Message = 0x0201001401434e393030305c3533393836303637
>  User-Name = "CN9000\\53986067"
>  NAS-Port-Type = Wireless-802.11
>  NAS-Identifier = "3Com"
>  NAS-IP-Address = 10.219.157.232
>  Message-Authenticator = 0x9e21864de4c626d3cfdac3077ceda7bb
>   Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
>   modcall[authorize]: module "preprocess" returns ok for request 0
> radius_xlat:  '../var/log/radius/radacct/10.219.157.232/auth-
> detail-20070919.log'
> rlm_detail:
> ../var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d.log
> expands to ../var/log/radius/radacct/10.219.157.232/auth-
> detail-20070919.log
>   modcall[authorize]: module "auth_log" returns ok for request 0
>   modcall[authorize]: module "chap" returns noop for request 0
>   modcall[authorize]: module "mschap" returns noop for request 0
>     rlm_realm: No '@' <%27@%27> in User-Name = "53986067", looking up
> realm NULL
>     rlm_realm: No such realm "NULL"
>   modcall[authorize]: module "suffix" returns noop for request 0
>   rlm_eap: EAP packet type response id 1 length 20
>   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
>   modcall[authorize]: module "eap" returns updated for request 0
>     users: Matched entry 53986067 at line 84
>   modcall[authorize]: module "files" returns ok for request 0
> rlm_pap: Found existing Auth-Type, not changing it.
>   modcall[authorize]: module "pap" returns noop for request 0
> modcall: leaving group authorize (returns updated) for request 0
>   rad_check_password:  Found Auth-Type EAP
> auth: type "EAP"
>   Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 0
> rlm_eap: Identity does not match User-Name, setting from EAP Identity.
>   rlm_eap: Failed in handler
>   modcall[authenticate]: module "eap" returns invalid for request 0
> modcall: leaving group authenticate (returns invalid) for request 0
> auth: Failed to validate the user.
> Login incorrect: [53986067/<no User-Password attribute>] (from client
> elhc-network port 0 cli 00-0F-CB-FA-D4-63)
> Delaying request 0 for 1 seconds
> Finished request 0
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Sending Access-Reject of id 63 to 10.219.157.232 port 20000
> Waking up in 4 seconds...
> --- Walking the entire request list ---
> Cleaning up request 0 ID 63 with timestamp 46f0d4b4
> Nothing to do.  Sleeping until we see a request.
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070920/472bf8f4/attachment.html>