accouting detail

[Guillaume Chartrand]

Here is my debug output

        Message-Authenticator = 0xcdc3f6cb9b506e11e3476d47403cc6c5
        Service-Type = Framed-User
        User-Name = "guillaume\000"
        Framed-MTU = 1488
        State = 0x404778b348a2618bc73c67e1113b0e93
        Called-Station-Id = "00-0F-3D-AB-1C-07:testGuillaume"
        Calling-Station-Id = "00-0E-35-99-F3-E9"
        NAS-Identifier = "D-Link Access Point"
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 54Mbps 802.11g"
        EAP-Message = 0x02e500261900170301001bbb11a33db5048201304fec33b354cbd91bec88a2508b28f74bb154
        NAS-IP-Address = 172.20.50.202
        NAS-Port = 1
        NAS-Port-Id = "STA port # 1"
+- entering group authorize
++[preprocess] returns ok
        expand: %{User-Name} -> guillaume
rlm_sql (sql): sql_set_user escaped user --> 'guillaume'
rlm_sql (sql): Reserving sql socket id: 1
        expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id
query:  SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'guillaume' ORDER BY id
rlm_sql (sql): User found in radcheck table
        expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id
query:  SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'guillaume' ORDER BY id
rlm_sql (sql): Released sql socket id: 1
++[sql] returns ok
++? if (ok)
? Evaluating (ok) -> TRUE
++? if (ok) -> TRUE
++- entering if (ok)
+++[control] returns ok
++- if (ok) returns ok
  rlm_eap: EAP packet type response id 229 length 38
  rlm_eap: Continuing tunnel setup.
++[eap] returns ok
++[expiration] returns noop
++[logintime] returns noop
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Success
  rlm_eap: Freeing handler
++[eap] returns ok
Login OK: [guillaume\000/<via Auth-Type = EAP>] (from client AP1 port 1 cli 00-0E-35-99-F3-E9)
+- entering group post-auth
rlm_sql (sql): Processing sql_postauth
        expand: %{User-Name} -> guillaume
rlm_sql (sql): sql_set_user escaped user --> 'guillaume'
        expand: INSERT INTO radpostauth (username, pass, reply) VALUES ('%{User-Name}','Password','%{reply:Packet-Type}') -> INSERT INTO radpostauth (username, pass, reply) VALUES ('guillaume','Password','Access-Accept')
        expand: /usr/local/var/log/radius/sqltrace.sql -> /usr/local/var/log/radius/sqltrace.sql
rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply) VALUES ('guillaume','Password','Access-Accept')
rlm_sql (sql): Reserving sql socket id: 0
query:  INSERT INTO radpostauth (username, pass, reply) VALUES ('guillaume','Password','Access-Accept')
rlm_sql (sql): Released sql socket id: 0
++[sql] returns ok
        MS-MPPE-Recv-Key = 0x8cd2d85433951c41be7a3c5c9c1faa1fd34514cff327bedeea93cb7b7a6c385a
        MS-MPPE-Send-Key = 0x6997e9a371ce06bd10afc7824352474dc279a8344ccdad092170b654da859e63
        EAP-Message = 0x03e50004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "guillaume"
Finished request 9.

I didn't copy all the debug output because with just one request he made about 1000 lines. If you want all the debug output, I can send it in attached file.
Thank
----------------------------
Guillaume Chartrand
Technicien informatique
Cégep régional de Lanaudière
Centre administratif, Repentigny
(450) 470-0911 poste 7218

-----Message d'origine-----
De : freeradius-users-bounces+guillaume.chartrand=collanaud.qc.ca at lists.freeradius.org [mailto:freeradius-users-bounces+guillaume.chartrand=collanaud.qc.ca at lists.freeradius.org] De la part de Alan DeKok
Envoyé : 17 avril 2008 10:20
À : FreeRadius users mailing list
Objet : Re: accouting detail

Guillaume Chartrand wrote:
> So why he doesn't make accounting. Can it be my AP who's doesn't send accounting packet? For my testing purpose I use a sample D-Link router.

  Yes.

  As always, run it in debugging mode to see what it's doing.

  Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html