Dot1x on cisco 3560
Omar Lopez Limonta
pollo.es.pollo at gmail.com
Fri Apr 25 08:35:06 CEST 2008
Hi i have problems again with authentication , i trying to use
freeradius and cisco 802.1x.
Windows said authentication error.
This is my users file:
xxxx Cleartext-Password := "PPPPPl"
Service-Type = NAS-Prompt-User,
cisco-avpair = "shell:priv-lvl=15"
yyy User-Password == "KKKK"
DEFAULT Auth-Type := Reject
I´m fallowing this doc
http://security.fi.infn.it/TRIP/802.1x-wired/802.1x-wired.html
This is my freeradius -X -A -d /etc/freeradius
Config: including file: /etc/freeradius/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/freeradius/huntgroups"
preprocess: hints = "/etc/freeradius/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/freeradius/users"
files: acctusersfile = "/etc/freeradius/acct_users"
files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/freeradius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Access-Request packet from host 172.29.11.1:21645, id=60, length=123
User-Name = "omar"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-17-94-97-D9-07"
Calling-Station-Id = "00-1A-92-70-A0-59"
EAP-Message = 0x02020009016f6d6172
Message-Authenticator = 0x549dffe0deb75cea25112692b8e6091e
NAS-Port = 50005
NAS-Port-Type = Ethernet
NAS-IP-Address = 172.29.11.1
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "omar", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 2 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
users: Matched entry omar at line 219
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 60 to 172.29.11.1:21645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x010300160410245db5b7205b11398ead15f567f6ed77
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb307e1b51eedc6cc895b65e64bcd34a3
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.29.11.1:21645, id=60, length=123
Sending duplicate reply to client authenticator-short-name:21645 - ID: 60
Re-sending Access-Challenge of id 60 to 172.29.11.1:21645
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 60 with timestamp 481178e6
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 172.29.11.1:21645, id=60, length=123
User-Name = "omar"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-17-94-97-D9-07"
Calling-Station-Id = "00-1A-92-70-A0-59"
EAP-Message = 0x02020009016f6d6172
Message-Authenticator = 0x549dffe0deb75cea25112692b8e6091e
NAS-Port = 50005
NAS-Port-Type = Ethernet
NAS-IP-Address = 172.29.11.1
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "omar", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 2 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
users: Matched entry omar at line 219
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 60 to 172.29.11.1:21645
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x0103001604100d0ce983971e4ed535cc6e85aa3bfb03
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x823bfbd94e10855a70a8868a41ee4805
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.29.11.1:21645, id=60, length=123
Sending duplicate reply to client authenticator-short-name:21645 - ID: 60
Re-sending Access-Challenge of id 60 to 172.29.11.1:21645
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 60 with timestamp 481178ed
Nothing to do. Sleeping until we see a request.
--
Xgalaga se disfruta más sobre NetBSD sparc64
Content Rules:
/////
\\\///
///\\\ The Duke of Url.
{ O--O }
/ /\ \
\ -- /
[||]
More information about the Freeradius-Users
mailing list