PEAP mschapv2 using xp native supplicant
Ryan Setiawan H
ryan.setiawan at banknisp.com
Mon Aug 11 10:18:47 CEST 2008
>> rlm_ldap: Added User-Password = Testing10 in check items
>> ---------------------------------------------------------------
>> clearly freeradius can see the password and also it clear text :)
>> below i also add samba schema that contain LM and NT password
>>
> ...
>
>> -------------------------------------------------------------------
>> mschap module say no clear text pasword and also can't create LM and NT
>> password
>> -------------------------------------------------------------------
>> +- entering group MS-CHAP
>> rlm_mschap: No Cleartext-Password configured. Cannot create LM-Password.
>> rlm_mschap: No Cleartext-Password configured. Cannot create NT-Password.
>>
>
> Please post ALL of the debug output. I suspect that you are doing the
> ldap lookups OUTSIDE of the TLS tunnel rather than INSIDE.
>
> Alan DeKok.
>
definitely my mistake again sorry for your inconvenience
I didn't include all the debug, because it was so large... anyway here
the debug :
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
EAP-Message = 0x0201000c0174657374696e67
Message-Authenticator = 0xb3af6d24481b168d63e57489e22a2458
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 1 length 12
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry DEFAULT at line 183
++[files] returns ok
++- entering redundant-load-balance group redundant-load-balance
rlm_ldap: - authorize
rlm_ldap: performing user authorization for testing
expand: (uid=%u) -> (uid=testing)
expand: ou=dialup,dc=zzz,dc=com -> ou=dialup,dc=zzz,dc=com
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to 192.168.11.7:389, authentication 0
rlm_ldap: bind as memberUid=radius,ou=admin,dc=zzz,dc=com/radiusjuga to
192.168.11.7:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in ou=dialup,dc=zzz,dc=com, with filter
(uid=testing)
rlm_ldap: checking if remote access for testing is allowed by uid
rlm_ldap: Added User-Password = Testing10 in check items
rlm_ldap: looking for check items in directory...
rlm_ldap: LDAP attribute radiusLoginTime as RADIUS attribute Login-Time
== "Wk0800-1800"
rlm_ldap: LDAP attribute ntPassword as RADIUS attribute NT-Password ==
0x54657374696e6731
rlm_ldap: LDAP attribute lmPassword as RADIUS attribute LM-Password ==
0x54657374696e6731
rlm_ldap: LDAP attribute radiusCallingStationId as RADIUS attribute
Calling-Station-Id == "00-16-36-5a-f1-e5"
rlm_ldap: looking for reply items in directory...
rlm_ldap: LDAP attribute radiusTunnelPrivateGroupId as RADIUS attribute
Tunnel-Private-Group-Id:0 = "101"
rlm_ldap: LDAP attribute radiusTunnelMediumType as RADIUS attribute
Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: LDAP attribute radiusTunnelType as RADIUS attribute
Tunnel-Type:0 = VLAN
rlm_ldap: LDAP attribute radiusFramedProtocol as RADIUS attribute
Framed-Protocol = PPP
rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute
Service-Type = Framed-User
rlm_ldap: user testing authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
+++[ldap_instance100] returns ok
++- redundant-load-balance group redundant-load-balance returns ok
++[expiration] returns noop
rlm_logintime: Checking Login-Time: 'Wk0800-1800'
rlm_logintime: timestr returned accept
rlm_logintime: Session-Timeout set to: 14340
++[logintime] returns ok
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Replacing User-Password in config items with
Cleartext-Password. !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Please update your configuration so that the "known
good" !!!
!!! clear text password is in Cleartext-Password, and not in
User-Password. !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
auth: type "EAP"
+- entering group authenticate
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
} # server nispdot1x
Framed-Compression = Van-Jacobson-TCP-IP
Tunnel-Private-Group-Id:0 = "101"
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Type:0 = VLAN
Framed-Protocol = PPP
Service-Type = Framed-User
Session-Timeout = 14340
EAP-Message = 0x0102001604108dedf8c669040a1bcd0115afdf91dbdc
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c11fa52425bd7da50678295fc0
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c11fa52425bd7da50678295fc0
EAP-Message = 0x020200060319
Message-Authenticator = 0x76203b9931bdb50a703f0f50746f7ee3
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry DEFAULT at line 183
++[files] returns ok
++- entering redundant-load-balance group redundant-load-balance
rlm_ldap: - authorize
rlm_ldap: performing user authorization for testing
expand: (uid=%u) -> (uid=testing)
expand: ou=dialup,dc=zzz,dc=com -> ou=dialup,dc=zzz,dc=com
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=dialup,dc=zzz,dc=com, with filter
(uid=testing)
rlm_ldap: checking if remote access for testing is allowed by uid
rlm_ldap: Added User-Password = Testing10 in check items
rlm_ldap: looking for check items in directory...
rlm_ldap: LDAP attribute radiusLoginTime as RADIUS attribute Login-Time
== "Wk0800-1800"
rlm_ldap: LDAP attribute ntPassword as RADIUS attribute NT-Password ==
0x54657374696e6731
rlm_ldap: LDAP attribute lmPassword as RADIUS attribute LM-Password ==
0x54657374696e6731
rlm_ldap: LDAP attribute radiusCallingStationId as RADIUS attribute
Calling-Station-Id == "00-16-36-5a-f1-e5"
rlm_ldap: looking for reply items in directory...
rlm_ldap: LDAP attribute radiusTunnelPrivateGroupId as RADIUS attribute
Tunnel-Private-Group-Id:0 = "101"
rlm_ldap: LDAP attribute radiusTunnelMediumType as RADIUS attribute
Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: LDAP attribute radiusTunnelType as RADIUS attribute
Tunnel-Type:0 = VLAN
rlm_ldap: LDAP attribute radiusFramedProtocol as RADIUS attribute
Framed-Protocol = PPP
rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute
Service-Type = Framed-User
rlm_ldap: user testing authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
+++[ldap_instance100] returns ok
++- redundant-load-balance group redundant-load-balance returns ok
++[expiration] returns noop
rlm_logintime: Checking Login-Time: 'Wk0800-1800'
rlm_logintime: timestr returned accept
rlm_logintime: Session-Timeout set to: 14340
++[logintime] returns ok
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Replacing User-Password in config items with
Cleartext-Password. !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Please update your configuration so that the "known
good" !!!
!!! clear text password is in Cleartext-Password, and not in
User-Password. !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP NAK
rlm_eap: EAP-NAK asked for EAP-Type/peap
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
++[eap] returns handled
} # server nispdot1x
Framed-Compression = Van-Jacobson-TCP-IP
Tunnel-Private-Group-Id:0 = "101"
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Type:0 = VLAN
Framed-Protocol = PPP
Service-Type = Framed-User
Session-Timeout = 14340
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c11ea43925bd7da50678295fc0
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c11ea43925bd7da50678295fc0
EAP-Message =
0x0203005019800000004616030100410100003d0301489aa4c688ae33dab29d1f856cc286c03cc9db7bf7cad627057407ea7ae7ff7600001600040005000a000900640062000300060013001200630100
Message-Authenticator = 0x281bfb9a23c4dbe800b5e8ddb8a1e450
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 3 length 80
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
TLS Length 70
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 085e], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
++[eap] returns handled
} # server nispdot1x
EAP-Message =
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
EAP-Message =
0x03131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3038303731303038353730335a170d3039303731303038353730335a307c310b3009060355040613024652310f300d0603550408130652616469757331153013060355040a130c4578616d706c6520496e632e312330210603550403131a4578616d706c65205365727665722043657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100ec2f4b59fd990bb3aa49d2754c816072707ecf355f0c386b6912dcdad9ad
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0xe7889fcefb2540ca2a830a91
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c11da33925bd7da50678295fc0
Finished request 6.
Going to the next request
Waking up in 4.8 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c11da33925bd7da50678295fc0
EAP-Message = 0x020400061900
Message-Authenticator = 0x30262688a22da1c1ee098b29dead42c4
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 4 length 6
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
++[eap] returns handled
} # server nispdot1x
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x2f31d1264b04c5b4
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c11ca23925bd7da50678295fc0
Finished request 7.
Going to the next request
Waking up in 4.8 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c11ca23925bd7da50678295fc0
EAP-Message = 0x020500061900
Message-Authenticator = 0x59d74248b0aadbf3119dbb3eeb19b42e
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 5 length 6
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
++[eap] returns handled
} # server nispdot1x
EAP-Message =
0x010600d51900845e93ce9ffc5452e73f653e704f16f3a5687176926863d49558a742cb84f6aeb016521bf6b5b28bfa804c0aea2719ac3a3df6629264b273d9498374bb2b5716c95c2db2c5a64b857c7f07e6f84c629730b2aceb3dddf4d50d7d549da3b9d5e03639b6881d7f75a86afbf799407cacee9100d670506bf5084ffe2d7ef5ff9c8f6d4b586d7ec9dc16f5c67e84f1a1817faff565ffc1642463ff7fdb1ecc13e9f87b9ce19d4715a693750e56ad468a453462abce15950da8ad436016bbd394128e09c47accf10816030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c11ba13925bd7da50678295fc0
Finished request 8.
Going to the next request
Waking up in 4.8 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c11ba13925bd7da50678295fc0
EAP-Message =
0x02060140198000000136160301010610000102010068ae16d861e6d0176177801ef590398287377ea6ae9a1cfd9e0b3f4e625327a010a5d554c73483273a477798edc6bd1eaa432232961de9e7075661ff9e90fb678fd8e9a6687c44d19ff9449be9b7336779175b780d08f3c9fa16c7defe05e2c42d480d633f375406c53486a487caa06358e52d72ab25fabfd960bff9271db83261783b026b500d2a14191890487de5bb545b8fe9be3aa055f3a516928cd891b9362090b986037ed516866ffafb8d14dae8baa94ab96ee893290a624b62d9f856dd3b7c4e0357a02998b1837aa538849aa0177846cee6b5f0f149ffe1cb6f5ce1866c3a325d65509b
EAP-Message =
0x74c24b32e27592aae4cf5f300d2c0ff6d2270d6d517e354a14030100010116030100200893d8c86f803d129370aa7f4d74ed825f64654040243375124d284762011ac7
Message-Authenticator = 0x3b0313d80ad2d14931da58b07de881c8
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 6 length 253
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
TLS Length 310
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
TLS_accept: SSLv3 read client key exchange A
rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls:
<<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read
finished A
rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept:
SSLv3 write change cipher spec A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 write finished A
TLS_accept: SSLv3 flush data
(other): SSL negotiation finished successfully
SSL Connection Established
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
++[eap] returns handled
} # server nispdot1x
EAP-Message =
0x0107003119001403010001011603010020ad9ae7e64760bfd2d6f845bb0d3bbc2d52fd692106a9eb9ed4cb34064db2b864
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c11aa03925bd7da50678295fc0
Finished request 9.
Going to the next request
Waking up in 4.7 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c11aa03925bd7da50678295fc0
EAP-Message = 0x020700061900
Message-Authenticator = 0x11836c23f609b5c4d3211d9b1f1f27f7
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 7 length 6
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake is finished
eaptls_verify returned 3
eaptls_process returned 3
rlm_eap_peap: EAPTLS_SUCCESS
++[eap] returns handled
} # server nispdot1x
EAP-Message =
0x0108002019001703010015f4ce316d1638ae01c009d50bcc9ebce4724655b215
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c119af3925bd7da50678295fc0
Finished request 10.
Going to the next request
Waking up in 4.7 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c119af3925bd7da50678295fc0
EAP-Message =
0x0208002319001703010018a04db0485b87de4eb7d2eddc7a5ce6a50d14325deef1bd91
Message-Authenticator = 0x2debf67f813086666dc007c59a814494
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 8 length 35
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Identity - testing
PEAP: Got tunneled identity of testing
PEAP: Setting default EAP type for tunneled EAP session.
PEAP: Setting User-Name to testing
+- entering group authorize
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
rlm_eap: EAP packet type response id 8 length 12
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
WARNING: You set Proxy-To-Realm = LOCAL, but it is a LOCAL realm!
Cancelling invalid proxy request.
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: EAP Identity
rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
PEAP: Got tunneled Access-Challenge
++[eap] returns handled
} # server nispdot1x
EAP-Message =
0x010900381900170301002d93de421ad659f0beec711c64baecd2841ee70b243fb51b315798646770e2eb873dcc3fe78aa54d2094030f54c2
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c118ae3925bd7da50678295fc0
Finished request 11.
Going to the next request
Waking up in 4.7 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c118ae3925bd7da50678295fc0
EAP-Message =
0x020900591900170301004eed1ff2effc4e1752902dee5fd3d3f56281045c8aea4fd46077f8f2f1afff31459f86f4a8fbb3e149d7ea91ce2bacd815be3a82d279f0533b969fe6383bdbbc520661151b64e5d073ebe9d0ed7258
Message-Authenticator = 0xea29d99ebda12bc8cee708264041d3a1
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 9 length 89
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: EAP type mschapv2
PEAP: Setting User-Name to testing
+- entering group authorize
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
rlm_eap: EAP packet type response id 9 length 66
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
WARNING: You set Proxy-To-Realm = LOCAL, but it is a LOCAL realm!
Cancelling invalid proxy request.
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/mschapv2
rlm_eap: processing type mschapv2
+- entering group MS-CHAP
rlm_mschap: No Cleartext-Password configured. Cannot create LM-Password.
rlm_mschap: No Cleartext-Password configured. Cannot create NT-Password.
rlm_mschap: Told to do MS-CHAPv2 for testing with NT-Password
rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication.
rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
rlm_eap: Freeing handler
++[eap] returns reject
auth: Failed to validate the user.
Login incorrect: [testing/<via Auth-Type = EAP>] (from client dotix port 0)
PEAP: Tunneled authentication was rejected.
rlm_eap_peap: FAILURE
++[eap] returns handled
} # server nispdot1x
EAP-Message =
0x010a00261900170301001bf310bdd3b5003f17e6b384f8d72a7a9c7a874b3b2ae817450b07cd
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1fa720c117ad3925bd7da50678295fc0
Finished request 12.
Going to the next request
Waking up in 4.6 seconds.
Framed-MTU = 1480
NAS-IP-Address = 192.168.12.130
NAS-Identifier = "ProCurve Switch 2650"
User-Name = "testing"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-1c-2e-73-85-00"
Calling-Station-Id = "00-16-36-5a-f1-e4"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "1"
State = 0x1fa720c117ad3925bd7da50678295fc0
EAP-Message =
0x020a00261900170301001bc69a12bf5d23b5dedc2c6c8d537f8577436b7bded7dee8eb290178
Message-Authenticator = 0x2a7e10fb4deef91301ba11f38f970f39
server nispdot1x {
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "testing", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 10 length 38
rlm_eap: Continuing tunnel setup.
++[eap] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Received EAP-TLV response.
rlm_eap_peap: Had sent TLV failure. User was rejected earlier in this
session.
rlm_eap: Handler failed in EAP/peap
rlm_eap: Failed in EAP select
++[eap] returns invalid
auth: Failed to validate the user.
Login incorrect: [testing/<via Auth-Type = EAP>] (from client dotix port
1 cli 00-16-36-5a-f1-e4)
} # server nispdot1x
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} -> testing
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 13 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 13
EAP-Message = 0x040a0004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.6 seconds.
Cleaning up request 4 ID 9 with timestamp +540
Cleaning up request 5 ID 10 with timestamp +540
Waking up in 0.1 seconds.
Cleaning up request 6 ID 11 with timestamp +540
Cleaning up request 7 ID 12 with timestamp +540
Cleaning up request 8 ID 13 with timestamp +540
Cleaning up request 9 ID 14 with timestamp +540
Cleaning up request 10 ID 15 with timestamp +540
Cleaning up request 11 ID 16 with timestamp +540
Cleaning up request 12 ID 17 with timestamp +540
Waking up in 1.0 seconds.
Cleaning up request 13 ID 18 with timestamp +540
Ready to process requests.
Thank You
Ryan Setiawan H
--
DISCLAIMER:
The contents of this email and attachments are confidential and may be subject to legal privilege. Any unauthorized use, copying, disclosure or communicating any part of it to others is strictly prohibited and may be unlawful. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately to the sender or notify us and delete the email and any attachments from your system. We cannot accept liability for loss or damage resulting from computer viruses. The integrity of email across the Internet cannot be guaranteed and PT BANK NISP, Tbk. will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to PT BANK NISP, Tbk.
More information about the Freeradius-Users
mailing list