Beating a dead horse, or freeradius 2.1.1 and active directory
Ben Little
BLittle at skylight.com
Thu Dec 4 01:48:52 CET 2008
Sure thing, here's the entire debug:
Rupert had mentioned in this thread that the switch is sending a PAP request and that it isn't being forwarded to the ntlm_auth module because of that, which makes sense I suppose. I am wondering though is there a way to configure the radius server to forward (or proxy) authentication requests to the KDC for authentication? I think what I'm doing is a little outside of the how-to that has been referenced.
FreeRADIUS Version 2.1.1, for host i386-redhat-linux-gnu, built on Nov 24 2008 at 10:30:21
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/control-socket
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 192.168.0.200 {
require_message_authenticator = no
secret = "@K3Y4r at d"
nastype = "cisco"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = yes
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
}
}
modules {
Module: Checking authenticate {...} for more modules to load
Module: Instantiating ntlm_auth
exec ntlm_auth {
wait = yes
program = "/usr/bin/ntlm_auth ntlm_auth --request-nt-key --domain=SKYLIGHT --username=%{mschap:User-Name} --password=%{User-Password}"
input_pairs = "request"
shell_escape = yes
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
Ready to process requests.
rad_recv: Access-Request packet from host <switch> port 1645, id=46, length=84
User-Name = "rtest"
User-Password = "<omitted>"
NAS-Port = 2
NAS-Port-Id = "tty2"
NAS-Port-Type = Virtual
Calling-Station-Id = "<omitted>"
NAS-IP-Address = +- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "rtest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry rtest at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = Local
WARNING: Please update your configuration, and remove 'Auth-Type = Local'
WARNING: Use the PAP or CHAP modules instead.
No "known good" password was configured for the user.
As a result, we cannot authenticate the user.
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> rtest
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 1 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 1
Sending Access-Reject of id 46 to <switch> port 1645
Waking up in 4.9 seconds.
> -----Original Message-----
> From:
> freeradius-users-bounces+blittle=skylight.com at lists.freeradius
> .org
> [mailto:freeradius-users-bounces+blittle=skylight.com at lists.fr
> eeradius.org] On Behalf Of tnt at kalik.net
> Sent: Wednesday, December 03, 2008 4:37 PM
> To: FreeRadius users mailing list
> Subject: RE: Beating a dead horse, or freeradius 2.1.1 and
> active directory
>
> >Just so you know I'm *NOT* trying to configure 802.1x
> suplicant authentication here, I'm trying to configure radius
> authentication for administrative access to the vty lines of
> the cisco equipment in question. I've followed the "how-to"
> twice now, to the letter of the how-to and it's not working.
> Did you see the response that suggested that it may not be
> possible for this to work since the mschap implementation
> from Cisco is not supported in freeradius?
> >
>
> Plain mschap from Cisco works fine. That relates to Cisco
> implementation of EAP-MSCHAPv2. So, what "is not working"?
> Can you post the debug (radiusd -X) of the failed request.
>
> Ivan Kalik
> Kalik Informatika ISP
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list