EAP/TTLS on LDAP with freeradius 2.0.1

[Thierry CHICH]

Le mercredi 06 février 2008, Alan DeKok a écrit :
> Thierry CHICH wrote:
> > However, it the accounting is always done with the outer identity
>
> ...
>
> > Login OK: [thierry.chich at ac-clermont.fr/xxxxxxxx] (from client
> > ap-rectorat02 port 0)
> > +- entering group post-auth
> >         expand: %{request.User-Name} ->
>
>   That's a typo.  It should be ... "%{request:User-Name}"
>
>   i.e. ':', not '.'.


You are right. I think this typo is in the original file inner-tunnel included 
in the distrib, but it work better - but not as I want. Now, I have a good 
Access-Accept packet, but it is seems that the accounting-request following 
don't care. Snifff.


Sending Access-Accept of id 20 to 172.30.87.66 port 4365
        User-Name = "thierry.chich at ac-clermont.fr"
        MS-MPPE-Recv-Key = 
0xca8629ba7a784c91e5e5f3bd9c9079e982db2881ce6f7de5d07fa32c07ae3850
        MS-MPPE-Send-Key = 
0x599f371c29d6ad682cd2a016f834166ec37c4ec1bc105f6a47425fde3b25a253
        EAP-Message = 0x03140004
        Message-Authenticator = 0x00000000000000000000000000000000
Finished request 6.
Going to the next request
Waking up in 0.8 seconds.
rad_recv: Accounting-Request packet from host 172.30.87.66 port 4366, id=144, 
length=159
        Acct-Status-Type = Start
        Acct-Session-Id = "00186E8FA2C0-000E3571040C-585099434"
        NAS-IP-Address = 172.30.87.66
        Acct-Input-Octets = 0
        Acct-Output-Octets = 0
        Acct-Input-Packets = 0
        Acct-Output-Packets = 0
        User-Name = "anonymous at ac-clermont.fr\000"
        Vendor-Specific = 0x564c414e2049442069733a20333032
        Vendor-Specific = 0x61632d636c65726d6f6e742e6672
        Acct-Session-Time = 4294967