NAS-Group? - different replies to different NASes?

[Adrian]

Hello Ivan,

Can you point me in the right direction with doing separate requests based
on the NAS-IP-Address Attribute?  Do I do this in the radius.conf file or in
the mysql DB somehow under the groups?

Currently I use the nas list from the flat file and the DB for everything
else including groups.

Thanks
Adrian

-----Original Message-----
From: freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org
[mailto:freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org] On
Behalf Of Ivan Kalik
Sent: Friday, February 22, 2008 10:22 AM
To: FreeRadius users mailing list
Subject: RE: NAS-Group? - different replies to different NASes?

NAS-IP-Address should be different in LAC and LNS requests. And unlang
works in version 2.0 not 1.1.x (later post).

Ivan Kalik
Kalik Informatika ISP


Dana 22/2/2008, "Adrian" <adrian at dsl4u.ca> piše:

>Hello Ivan,
>
>The Telco wants me to send those parameters to them.  I have no choice in
>that.  I'm confused because with every other Telco the setup was straight
>forward, I setup a tunnel/vpnd-group+virtual template from our LNS to the
>Telco's LAC and the requests for the user authentication comes from their
>LAC through my LNS all the time.  With this Telco,  I see the same request
>twice.  Once from their Radius and then from my LNS.  The problem is
>distinguishing between them and answering differently.
>
>Maybe I don't even have to do that, is just that I'm not sure how to do it
>otherwise.
>
>For now I'll do some reading on "unlang" as per Alan's request and see how
>that goes.
>
>Thanks
>Adrian
>
>-----Original Message-----
>From: freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org
>[mailto:freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org] On
>Behalf Of Ivan Kalik
>Sent: Friday, February 22, 2008 6:32 AM
>To: FreeRadius users mailing list
>Subject: RE: NAS-Group? - different replies to different NASes?
>
>>4. Our radius sends the Tunnel information back to Telco Radius
>
>Why? It will be the same every time for every user. Configure tunnel
>parametars on the (virtual) interface.
>
>Ivan Kalik
>Kalik Informatika ISP
>
>-
>List info/subscribe/unsubscribe? See
>http://www.freeradius.org/list/users.html
>
>-
>List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
>

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html