Force user disconnect on NAS

Arran Cudbard-Bell A.Cudbard-Bell at sussex.ac.uk
Thu Feb 28 00:13:05 CET 2008


J-P Raymond wrote:
>   Ok I'll look at it thanks but
>  
> what about Disconnect message ?
>  
> I pull this info from my log
>  
>         User-Name = xxx at xxxx.com <mailto:xxx at xxxx.com>
>         Acct-Status-Type = Start
>         Acct-Session-Id = "12345678.90.123"
>         NAS-Identifier = "router"
>         NAS-IP-Address = 200.10.50.100
>         NAS-Port-Type = Virtual
>         Framed-IP-Address = 200.10.50.1
>         Acct-Delay-Time = 0
>         Client-IP-Address = 200.10.50.100
>         Acct-Unique-Session-Id = "8d120506b2972302"
>  
> I put this in packet.txt
>  
> I tried :
> cat packet.txt | radclient -x 200.10.50.100:3799 disconnect mysecret
> // 
> But radclient keep retrying and it doesn't seams to work !
>  
> on the web site it mentioned I need disconnect enabled Nas ?
>  
> Someone already tried this ?

http://www.ieee802.org/1/files/public/MIBs/802-1x-2004-mib.txt

>  
> Thanks
> 
> 
> 
> 
>  > Date: Wed, 27 Feb 2008 21:31:06 +0000
>  > To: freeradius-users at lists.freeradius.org
>  > Subject: Re: Force user disconnect on NAS
>  > From: A.Cudbard-Bell at sussex.ac.uk
>  >
>  > J-P Raymond wrote:
>  > >
>  > > Question,
>  > >
>  > > Is it possible from the radius server to force a user to disconnect ?
>  > >
>  > > If yes what do I need to do that ?
>  > >
>  > > Normal
>  > > Client --> NAS --> Radius server
>  > >
>  > > I would like to send a request
>  > > Radius server --> NAS X Client
>  > >
>  > > Thanks for your time
>  > >
>  > >
>  > >
>  > >
>  > > 
> ------------------------------------------------------------------------
>  > >
>  > > -
>  > > List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html
>  > Yes but your NAS needs to support CoA (Change of Authorisation) , and
>  > your RADIUS server needs to support it too; currently FR doesn't.
>  >
>  > Your best bet is to use the standard 802.1x mib and force
>  > re-authentication using SNMP. Most NAS implement this MIB just people
>  > seem to overlook it...
>  >
>  > Regards,
>  > Arran
>  >
>  >
>  > --
>  > Arran Cudbard-Bell (A.Cudbard-Bell at sussex.ac.uk)
>  > Authentication, Authorisation and Accounting Officer
>  > Infrastructure Services | ENG1 E1-1-08
>  > University Of Sussex, Brighton
>  > EXT:01273 873900 | INT: 3900
>  >
>  > -
>  > List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html
> 
> 
> 
> ------------------------------------------------------------------------
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html




More information about the Freeradius-Users mailing list