probs with accounting Attribute Client-IP-Address was not
orion
meshkruaj at gmail.com
Sat Jan 12 11:03:34 CET 2008
after replacing the rlm_acct_unique.c my debug tells :
rad_recv: Accounting-Request packet from host 192.168.2.225 port 1025,
id=94, length=137
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 48
NAS-Port-Type = Ethernet
User-Name = "user"
Calling-Station-Id = "00:D0:59:D9:13:61"
Called-Station-Id = "service1"
NAS-Port-Id = "ether3"
Acct-Session-Id = "81000000"
Framed-IP-Address = 10.254.254.254
Acct-Authentic = RADIUS
Acct-Status-Type = Start
NAS-Identifier = "MikroTik"
NAS-IP-Address = 192.168.2.225
Acct-Delay-Time = 0
+- entering group preacct
++[preprocess] returns ok
rlm_acct_unique: Hashing 'NAS-Port = 48,Client-IP-Address <INVALID-TOKEN>
192.168.2.225,NAS-IP-Address = 192.168.2.225,Acct-Session-Id =
"81000000",User-Name = "user"'
now it says "INVALID-TOKEN".
should i replace only that file or are other files ( maybe entire package )
to be replaced ?!
thanx
On 12/01/2008, Alan DeKok <aland at deployingradius.com> wrote:
>
> orion wrote:
> > hi to all.
> > im using FR 2.0.0 with default config.
> > in debug mode i get
> >
> > *rlm_acct_unique*: *WARNING*: *Attribute* *Client *-*IP*-*Address* was
> > not found in
> > request, unique ID MAY be inconsistent
>
> Good point. The way that attribute is handled was changed in 2.0.
>
> I've committed a fix that should enable your existing configuration to
> work in 2.0. You can grab CVS head, and replace the rlm_acct_unique.c
> file in 2.0.0 with the version from CVS. Re-build, re-install, and it
> should now work.
>
> Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080112/bb258674/attachment.html>
More information about the Freeradius-Users
mailing list