freeradius 2.0.1 and xtradius

[John Joe]

Hy, 

I am trying to proxy with freeradius 2.0.1 the requests to an xtradius. The problem is that it doesn't  works how it should.


 rad_recv: Access-Request packet from host 127.0.0.1 port 35640, id=136, length=67
        User-Name = "aol123"
        User-Password = "test"
        NAS-IP-Address = 10.0.0.2
        NAS-Port = 10
        Framed-Protocol = PPP
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
    rlm_realm: No '@' in User-Name = "aol123", looking up realm NULL
    rlm_realm: No such realm "NULL"
++[suffix] returns noop
++[unix] returns notfound
        expand: %{User-Name} -> aol123
    users: Matched entry DEFAULT at line 136
++[files] returns ok
++[pap] returns noop
Sending Access-Request of id 201 to 9.0.0.2 port 1812
        User-Name = "aol123"
        User-Password = "test"
        NAS-IP-Address = 10.0.0.2
        NAS-Port = 10
        Framed-Protocol = PPP
        Service-Type = Framed-User
        Proxy-State = 0x313336
Proxying request 3 to home server 9.0.0.2 port 1812
Sending Access-Request of id 201 to 9.0.0.2 port 1812
        User-Name = "aol123"
        User-Password = "test"
        NAS-IP-Address = 10.0.0.2
        NAS-Port = 10
        Framed-Protocol = PPP
        Service-Type = Framed-User
        Realm = "AOL"
        Proxy-State = 0x313336
Going to the next request
Waking up in 0.9 seconds.
WARNING: Insecure packet from host 213.157.176.7:  Packet does not contain required Message-Authenticator attribute
Waking up in 0.8 seconds.
Waking up in 13.9 seconds.


After this the client is authentificated by xtradius but I don't get the output of what the xtradius server says(the attributes.), and radtest give me this:

rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=136, length=20

The auth and acct on the xtradius are some scripts made in  phyton.

This give's me if I radtest directly the xtradius server:



radtest aol123 test  9.0.0.2 10 testing1232 19 10.0.0.2
Sending Access-Request of id 80 to 9.0.0.2 port 1812
        User-Name = "aol123"
        User-Password = "test"
        NAS-IP-Address = 10.0.0.2
        NAS-Port = 10
        Framed-Protocol = PPP
radclient: received bad packet: WARNING: Insecure packet from host 9.0.0.2:  Packet does not contain required Message-Authenticator attribute
Sending Access-Request of id 80 to 9.0.0.2 port 1812
        User-Name = "aol123"
        User-Password = "test"
        NAS-IP-Address = 10.0.0.2
        NAS-Port = 10
        Framed-Protocol = PPP
radclient: received bad packet: WARNING: Insecure packet from host 9.0.0.2 :  Packet does not contain required Message-Authenticator attribute

And also I don't get the attributes. I must say that i haven't try to authentificate thru freeradius with a real client only with radtest it is posible to work even if I get thoes warnings  and no attribute displayed?





       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080123/cc9574b4/attachment.html>