rpmbuld errors 2.0.1

[Joe Vieira]

also make sure $_incdir is defined in your .rpmmacros

Joe Vieira
UNIX Systems Administrator
Clark University - ITS



Joe Vieira wrote:
> you'll need to either rename everything in the spec file to be
> "freeradius-server"
> or just open the tar.gz rename the directory INSIDE IT (which is also
> freeradius-server) to freeradius-2.0.1... then zip it all back up and
> run your spec again and it will work.
>
> Joe Vieira
> UNIX Systems Administrator
> Clark University - ITS
>
>
>
> Andrew Long wrote:
>   
>> Hello:
>> I am trying to build the rpm for 2.0.1 on CentOS 5. The first oddity
>> is that the source now comes as freeradius-server-2.0.1.tar.gz;
>> starting the rpmbuild with $ rpmbuild -bb freeradius.spec yields an
>> error that SOURCES/freeradius-2.0.1.tar.gz does not exist. I tried
>> renaming freeradius-server-2.0.1.tar.gz to freeradius-2.0.1.tar.gz,
>> and now the build starts, but it always ends with the following error:
>>
>> + STATUS=0
>> + '[' 0 -ne 0 ']'
>> + cd freeradius-2.0.1
>> /var/tmp/rpm-tmp.71302: line 29: cd: freeradius-2.0.1: No such file or directory
>> error: Bad exit status from /var/tmp/rpm-tmp.71302 (%prep)
>>
>> Here is the block from the rpm-tmp file:
>>   set -x
>>   umask 022
>>   cd /home/along/rpmbuild/BUILD
>> cd /home/along/rpmbuild/BUILD
>> rm -rf freeradius-2.0.1
>> /bin/gzip -dc /home/along/rpmbuild/SOURCES/freeradius-2.0.1.tar.gz | tar -xvvf -
>> STATUS=$?
>> if [ $STATUS -ne 0 ]; then
>>   exit $STATUS
>> fi
>> cd freeradius-2.0.1 <----------------------------------------------LINE 29
>> [ `/usr/bin/id -u` = '0' ] && /bin/chown -Rhf root .
>> [ `/usr/bin/id -u` = '0' ] && /bin/chgrp -Rhf root .
>> /bin/chmod -Rf a+rX,u+w,g-w,o-w .
>>
>> I am not an expert with rpmbuild, so I apologize if this is a bit
>> off-topic. I preceded the build with
>> $ rpmbuild --clean freeradius.spec as I had previously build 1.1.7 on
>> the same host.
>>
>> - Andrew
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>>     
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>