rpmbuld errors 2.0.1

[Andrew Long]

Well, not so lucky after all. Looks like the build get 99% completed
and we get an error:

+ RADDB=/var/tmp/freeradius-root/etc/raddb
+ perl -i -pe 's/^#user =.*$/user = radiusd/'
/var/tmp/freeradius-root/etc/raddb/radiusd.conf
+ perl -i -pe 's/^#group =.*$/group = radiusd/'
/var/tmp/freeradius-root/etc/raddb/radiusd.conf
+ perl -i -pe 's/#      shadow =/shadow =/'
/var/tmp/freeradius-root/etc/raddb/radiusd.conf
+ rm -f /var/tmp/freeradius-root/usr/share/man/man8/builddbm.8
+ rm -f /var/tmp/freeradius-root/usr/sbin/rc.radiusd
+ install -m 0644 CREDITS
/var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
+ install -m 0644 COPYRIGHT
/var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
+ install -m 0644 LICENSE
/var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
+ cd redhat
+ install -m 755 rc.radiusd-redhat
/var/tmp/freeradius-root/etc/rc.d/init.d/radiusd
+ install -m 644 radiusd-logrotate
/var/tmp/freeradius-root/etc/logrotate.d/radiusd
+ install -m 644 radiusd-pam /var/tmp/freeradius-root/etc/pam.d/radius
+ cd ..
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip
+ /usr/lib/rpm/brp-strip-static-archive
strip: Unable to recognise the format of the input file
`/var/tmp/freeradius-root/usr/lib/rlm_perl.a(DynaLoader.a)'
strip: Unable to recognise the format of the input file
`/var/tmp/freeradius-root/usr/lib/rlm_perl.a(DynaLoader.a)'
+ /usr/lib/rpm/brp-strip-comment-note
Processing files: freeradius-2.0.1-0
error: File must begin with "/": %{_incdir}/freeradius/*


RPM build errors:
    File must begin with "/": %{_incdir}/freeradius/*

Any hints?

- Andrew

On Jan 28, 2008 8:55 AM, Joe Vieira <jvieira at clarku.edu> wrote:
> you'll need to either rename everything in the spec file to be
> "freeradius-server"
> or just open the tar.gz rename the directory INSIDE IT (which is also
> freeradius-server) to freeradius-2.0.1... then zip it all back up and
> run your spec again and it will work.
>
> Joe Vieira
> UNIX Systems Administrator
> Clark University - ITS
>
>
>
>
> Andrew Long wrote:
> > Hello:
> > I am trying to build the rpm for 2.0.1 on CentOS 5. The first oddity
> > is that the source now comes as freeradius-server-2.0.1.tar.gz;
> > starting the rpmbuild with $ rpmbuild -bb freeradius.spec yields an
> > error that SOURCES/freeradius-2.0.1.tar.gz does not exist. I tried
> > renaming freeradius-server-2.0.1.tar.gz to freeradius-2.0.1.tar.gz,
> > and now the build starts, but it always ends with the following error:
> >
> > + STATUS=0
> > + '[' 0 -ne 0 ']'
> > + cd freeradius-2.0.1
> > /var/tmp/rpm-tmp.71302: line 29: cd: freeradius-2.0.1: No such file or directory
> > error: Bad exit status from /var/tmp/rpm-tmp.71302 (%prep)
> >
> > Here is the block from the rpm-tmp file:
> >   set -x
> >   umask 022
> >   cd /home/along/rpmbuild/BUILD
> > cd /home/along/rpmbuild/BUILD
> > rm -rf freeradius-2.0.1
> > /bin/gzip -dc /home/along/rpmbuild/SOURCES/freeradius-2.0.1.tar.gz | tar -xvvf -
> > STATUS=$?
> > if [ $STATUS -ne 0 ]; then
> >   exit $STATUS
> > fi
> > cd freeradius-2.0.1 <----------------------------------------------LINE 29
> > [ `/usr/bin/id -u` = '0' ] && /bin/chown -Rhf root .
> > [ `/usr/bin/id -u` = '0' ] && /bin/chgrp -Rhf root .
> > /bin/chmod -Rf a+rX,u+w,g-w,o-w .
> >
> > I am not an expert with rpmbuild, so I apologize if this is a bit
> > off-topic. I preceded the build with
> > $ rpmbuild --clean freeradius.spec as I had previously build 1.1.7 on
> > the same host.
> >
> > - Andrew
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>