rpmbuld errors 2.0.1

[Andrew Long]

OK, can you give me the explicit code here. Here is the file as it exists:

$ cat .rpmmacros
%_topdir %(echo $HOME)/rpmbuild

- Andrew


On Jan 28, 2008 9:13 AM, Joe Vieira <jvieira at clarku.edu> wrote:
> that's why i sent my second email telling you to make sure $_incdir is
> defined in your .rpmmacros file. =)
>
>
> Joe Vieira
> UNIX Systems Administrator
> Clark University - ITS
>
>
>
> Andrew Long wrote:
> > Well, not so lucky after all. Looks like the build get 99% completed
> > and we get an error:
> >
> > + RADDB=/var/tmp/freeradius-root/etc/raddb
> > + perl -i -pe 's/^#user =.*$/user = radiusd/'
> > /var/tmp/freeradius-root/etc/raddb/radiusd.conf
> > + perl -i -pe 's/^#group =.*$/group = radiusd/'
> > /var/tmp/freeradius-root/etc/raddb/radiusd.conf
> > + perl -i -pe 's/#      shadow =/shadow =/'
> > /var/tmp/freeradius-root/etc/raddb/radiusd.conf
> > + rm -f /var/tmp/freeradius-root/usr/share/man/man8/builddbm.8
> > + rm -f /var/tmp/freeradius-root/usr/sbin/rc.radiusd
> > + install -m 0644 CREDITS
> > /var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
> > + install -m 0644 COPYRIGHT
> > /var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
> > + install -m 0644 LICENSE
> > /var/tmp/freeradius-root/usr/share/doc/freeradius-2.0.1
> > + cd redhat
> > + install -m 755 rc.radiusd-redhat
> > /var/tmp/freeradius-root/etc/rc.d/init.d/radiusd
> > + install -m 644 radiusd-logrotate
> > /var/tmp/freeradius-root/etc/logrotate.d/radiusd
> > + install -m 644 radiusd-pam /var/tmp/freeradius-root/etc/pam.d/radius
> > + cd ..
> > + /usr/lib/rpm/brp-compress
> > + /usr/lib/rpm/brp-strip
> > + /usr/lib/rpm/brp-strip-static-archive
> > strip: Unable to recognise the format of the input file
> > `/var/tmp/freeradius-root/usr/lib/rlm_perl.a(DynaLoader.a)'
> > strip: Unable to recognise the format of the input file
> > `/var/tmp/freeradius-root/usr/lib/rlm_perl.a(DynaLoader.a)'
> > + /usr/lib/rpm/brp-strip-comment-note
> > Processing files: freeradius-2.0.1-0
> > error: File must begin with "/": %{_incdir}/freeradius/*
> >
> >
> > RPM build errors:
> >     File must begin with "/": %{_incdir}/freeradius/*
> >
> > Any hints?
> >
> > - Andrew
> >
> > On Jan 28, 2008 8:55 AM, Joe Vieira <jvieira at clarku.edu> wrote:
> >
> >> you'll need to either rename everything in the spec file to be
> >> "freeradius-server"
> >> or just open the tar.gz rename the directory INSIDE IT (which is also
> >> freeradius-server) to freeradius-2.0.1... then zip it all back up and
> >> run your spec again and it will work.
> >>
> >> Joe Vieira
> >> UNIX Systems Administrator
> >> Clark University - ITS
> >>
> >>
> >>
> >>
> >> Andrew Long wrote:
> >>
> >>> Hello:
> >>> I am trying to build the rpm for 2.0.1 on CentOS 5. The first oddity
> >>> is that the source now comes as freeradius-server-2.0.1.tar.gz;
> >>> starting the rpmbuild with $ rpmbuild -bb freeradius.spec yields an
> >>> error that SOURCES/freeradius-2.0.1.tar.gz does not exist. I tried
> >>> renaming freeradius-server-2.0.1.tar.gz to freeradius-2.0.1.tar.gz,
> >>> and now the build starts, but it always ends with the following error:
> >>>
> >>> + STATUS=0
> >>> + '[' 0 -ne 0 ']'
> >>> + cd freeradius-2.0.1
> >>> /var/tmp/rpm-tmp.71302: line 29: cd: freeradius-2.0.1: No such file or directory
> >>> error: Bad exit status from /var/tmp/rpm-tmp.71302 (%prep)
> >>>
> >>> Here is the block from the rpm-tmp file:
> >>>   set -x
> >>>   umask 022
> >>>   cd /home/along/rpmbuild/BUILD
> >>> cd /home/along/rpmbuild/BUILD
> >>> rm -rf freeradius-2.0.1
> >>> /bin/gzip -dc /home/along/rpmbuild/SOURCES/freeradius-2.0.1.tar.gz | tar -xvvf -
> >>> STATUS=$?
> >>> if [ $STATUS -ne 0 ]; then
> >>>   exit $STATUS
> >>> fi
> >>> cd freeradius-2.0.1 <----------------------------------------------LINE 29
> >>> [ `/usr/bin/id -u` = '0' ] && /bin/chown -Rhf root .
> >>> [ `/usr/bin/id -u` = '0' ] && /bin/chgrp -Rhf root .
> >>> /bin/chmod -Rf a+rX,u+w,g-w,o-w .
> >>>
> >>> I am not an expert with rpmbuild, so I apologize if this is a bit
> >>> off-topic. I preceded the build with
> >>> $ rpmbuild --clean freeradius.spec as I had previously build 1.1.7 on
> >>> the same host.
> >>>
> >>> - Andrew
> >>> -
> >>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >>>
> >>>
> >> -
> >> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >>
> >>
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>