eap authentication problem
Mike Zoeteweij
mikezoeteweij at xs4all.nl
Tue Jan 29 22:05:52 CET 2008
Can anyone tell me what I'm doing wrong here?
trying to auth. a wireless user with freeradius. I'm not sure if the
mistake is in the certificates of the radius config.
authebtication process gets stuck in "attempting to authenticate"
EAP-Message = 0x064d5a2d6166740e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x55a44efe0a103d2b2a24bb8f72998edc
Finished request 6
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.100.5:4855, id=3,
length=191
Message-Authenticator = 0xfab5bbc4d21c025b436d243b9579b617
Service-Type = Framed-User
User-Name = "wireless"
Framed-MTU = 1488
State = 0x55a44efe0a103d2b2a24bb8f72998edc
Called-Station-Id = "00-18-F8-F5-87-53:mikiemike"
Calling-Station-Id = "00-13-E8-94-F3-B5"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020300060d00
NAS-IP-Address = 192.168.100.5
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "chap" returns noop for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "wireless", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched DEFAULT at 152
users: Matched DEFAULT at 171
users: Matched wireless at 231
modcall[authorize]: module "files" returns ok for request 7
modcall: group authorize returns updated for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 7
modcall: group authenticate returns handled for request 7
Sending Access-Challenge of id 3 to 192.168.100.5:4855
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x0104000a0d8000000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xbf025c40824435e386c6a8b6a1ad5735
Finished request 7
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 4 ID 0 with timestamp 479f9369
Cleaning up request 5 ID 1 with timestamp 479f9369
Cleaning up request 6 ID 2 with timestamp 479f9369
Cleaning up request 7 ID 3 with timestamp 479f936
thanks a lot in advance for any help.
reg. Mike
More information about the Freeradius-Users
mailing list