NAS-Post in Netgear Accounting-Packet

[Wolfgang Burger]

Hi list,

please have a look at this Accounting-Request.
It was sent by a netgear WG102 WLAN-Access-Point:

rad_recv: Accounting-Request packet from host 192.168.1.133 port 1033, 
id=48, length=194
         Service-Type = Framed-User
         Acct-Status-Type = Stop
         User-Name = "burgerw"
         Framed-MTU = 1488
         Acct-Session-Id = "       2"
         Acct-Authentic = RADIUS
         Acct-Session-Time = 159
         Acct-Terminate-Cause = User-Request
         Acct-Delay-Time = 0
         Called-Station-Id = "061B2F76F3B6:MPIIB-Guests"
         Calling-Station-Id = "0019E3D7B020"
         Framed-IP-Address = 192.168.20.34
         NAS-Identifier = "netgear3"
         NAS-Port-Type = Wireless-802.11
         Connect-Info = "CONNECT 54Mbps 802.11g"
         NAS-IP-Address = 192.168.1.133
         NAS-Port = 0
         NAS-Port-Id = "STA port # 0"

The output of "radwho -R":
	User-Name = "burgerw"
	Acct-Session-Id = "       2"
	NAS-IP-Address = 192.168.1.133
	NAS-Port = 1
	Service-type = Login-User
	Framed-IP-Address =
	Acct-Session-Time = 359
	Calling-Station-Id = "0019E3D7B020"

The error:
	rlm_radutmp: Logout for NAS netgear3 port 0, but no Login record
	

Is the Access-Point sending the wrong NAS-Port?	
If so, I would contact Netgear. I just want to confirm what`s the 
problem.

Thanks and best regards

Wolfgang Burger



Mit freundlichen Grüßen


Wolfgang Burger <burgerw at immunbio.mpg.de>

Max-Planck-Institut fuer Immunbiologie
Scientific Data Processing Unit
(+00 49) 761 / 5108 461
Stuebeweg 51
D-79108 Freiburg
Germany