freeradius ippool issue

Ivan Kalik tnt at kalik.net
Thu Jul 17 12:16:51 CEST 2008


You have not assigned the IP address via radius. It's assigned by the
dhcp server:

Sending Access-Accept of id 31 to 192.168.1.1 port 40086
        Framed-Protocol := PPP
        Framed-IP-Netmask = 255.255.255.255
        Framed-MTU := 1500
        Framed-Compression := Van-Jacobson-TCP-IP
        Session-Timeout = 14400
        Idle-Timeout = 600
        Port-Limit = 1
        Service-Type := Framed-User

*** No IP address in Access-Accept; Pool-Name or Framed-IP-Address were
not set for this user ***

Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 192.168.1.1 port 34314,
id=32,
length=115
        Acct-Session-Id = "487F15BE052000"
        User-Name = "gogu"
        Acct-Status-Type = Start
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Calling-Station-Id = "00:FF:74:D6:85:27"
        Acct-Authentic = RADIUS
        NAS-Port-Type = Async
        Framed-IP-Address = 10.67.15.34   <== This came from dhcp
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 0
        Acct-Delay-Time = 0

Ivan Kalik
Kalik Informatika ISP




More information about the Freeradius-Users mailing list