Whether the FreeRADIUS supports switch 3Com 5500G-EI ?

[Gennadiy Redko]

Krzysztof Olędzki пишет:
> On 2008-06-10 14:45, Gennadiy Redko wrote:
>> Krzysztof Olędzki ?????:
>>
>>> I guess it works because it is properly configured. 3Com may also 
>>> work if you setup it with (a blind guess):
>>>
>>> domain (...)
>>>  vlan-assignment-mode string
>>>  accounting optional
>>>
>> It is updated firmware up to V3.03.01s56e.
> 
> Any reason you did not select a s168 version?
> 

We do not apply encrypting. Though I too would choose a variant with 
a long key. Probably my colleague - the minimalist...

>> The config under your recommendations is changed.
>> Does not work.
> 
> OK, we absolutely need some more info:
> 
>  - display vlan
>  - display vlan ... (2?)
>  - display interface ... (G7/0/40?)
>  - display port-security interface ... (G7/0/40)

I have opened bugreport:
http://bugs.freeradius.org/show_bug.cgi?id=563
  Here the reference to a full config of the switch:
http://bugs.freeradius.org/showattachment.cgi?attach_id=267
> 
> BTW: There is no need to add and use TMT802, freeradius already comes 
> with all what you need here:
> 
> Tunnel-Type = VLAN
> Tunnel-Medium-Type = IEEE-802
> Tunnel-Private-Group-ID = ...
Tomorrow my colleague will try to apply your remarks and I shall 
inform result. We can give real IP to a stand, for acceleration of 
debugging

Best regards.
Gennadii
> 
> Best regards,
> 
>             Krzysztof Olędzki