post-auth and ippool

[Ivan Kalik]

Pool-Name :=

Ivan Kalik
Kalik Informatika ISP


Dana 17/6/2008, "Frank James Wilson" <frank at xfactor.no> piše:

>Hey,
>
>I'm trying to set up freeradius with our ISP's APN (mobile network) service.
>I've been using freeradius for sometime,and it works no problems.
>
>I'm using the system authentication module, and again,no problems here.
>
>My problem occurs when I want to use the 'dhcp' or ippool module.
>
>Here's my error;
>-----------------------------------------------------------------------------------
>radiusd -x
>Starting - reading configuration files ...
>Using deprecated naslist file.  Support for this will go away soon.
>Module: Loaded exec
>rlm_exec: Wait=yes but no output defined. Did you mean output=none?
>Module: Instantiated exec (exec)
>Module: Loaded expr
>Module: Instantiated expr (expr)
>Module: Loaded PAP
>Module: Instantiated pap (pap)
>Module: Loaded CHAP
>Module: Instantiated chap (chap)
>Module: Loaded MS-CHAP
>Module: Instantiated mschap (mschap)
>Module: Loaded System
>Module: Instantiated unix (unix)
>Module: Loaded eap
>rlm_eap: Loaded and initialized type md5
>rlm_eap: Loaded and initialized type leap
>rlm_eap: Loaded and initialized type gtc
>rlm_eap: Loaded and initialized type mschapv2
>Module: Instantiated eap (eap)
>Module: Loaded preprocess
>Module: Instantiated preprocess (preprocess)
>Module: Loaded realm
>Module: Instantiated realm (suffix)
>Module: Loaded files
>Module: Instantiated files (files)
>Module: Loaded Acct-Unique-Session-Id
>Module: Instantiated acct_unique (acct_unique)
>Module: Loaded detail
>Module: Instantiated detail (detail)
>Module: Loaded radutmp
>Module: Instantiated radutmp (radutmp)
>Module: Loaded IPPOOL
>Module: Instantiated ippool (mobile)
>Initializing the thread pool...
>Listening on authentication *:1645
>Listening on accounting *:1646
>Listening on authentication *:1812
>Ready to process requests.
>rad_recv: Access-Request packet from host 172.20.0.1:1812, id=122,
>length=122
>    NAS-Identifier = "ggsn3"
>    User-Name = "mobile"
>    User-Password = "xxxxxxxxx"
>    NAS-IP-Address = 172.20.0.1
>    NAS-Port-Type = Virtual
>    Called-Station-Id = "mdaxxxx"
>    Calling-Station-Id = "474000xxxx"
>    Acct-Session-Id = "d4118d7924abecce"
>    Acct-Multi-Session-Id = "d4118d7900003472"
>Login OK: [mobile/Bama4ever] (from client ggsn3 port 0 cli 4740008077)
>rlm_ippool: Could not find Pool-Name attribute.
>Sending Access-Accept of id 122 to 172.20.0.1 port 1812
>--------------------------------------------------------------------------------------
>Now as you can see I get the error saying:
>
>rlm_ippool: Could not find Pool-Name attribute.
>
>Which I can't understand, since it is defined;
>
>radiusd.conf:
>---------------------------------------------------------------------------------------
>ippool mobile {
>
>                name = mobile
>                range-start = 172.20.0.2
>                range-stop = 172.20.7.250
>
>                netmask = 255.255.248.0
>
>                cache-size = 800
>
>                session-db = ${raddbdir}/db.ippool
>
>                ip-index = ${raddbdir}/db.ipindex
>
>                override = no
>
>                maximum-timeout = 0
>
>                #key = "172.20.0.1:1813"
>        }
>----------------------------------------------------------------------------------------------
>
>And also in the users file:
>
>-----------------------------------------------------------------------------------------------
>mobile          Auth-Type = System, Pool-Name = mobile
>                Service-Type == Login-User,
>                Framed-Protocol = PPP,
>                Fall-Through = Yes
>------------------------------------------------------------------------------------------------
>
>What am I doing wrong?
>
>Please advice..
>
>best,
>
>Frank James Wilson
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>