Problem in connecting to switch on telnet

[Guk Viktor]

By thanks for help, I was dismantled. But another problem arose.

Radius answers:
modcall: entering group authenticate for request 0
 HASH: user admin found in hashtable bucket 45083
 modcall[authenticate]: module "unix" returns ok for request 0
modcall: leaving group authenticate (returns ok) for request 0
Login OK: [admin/admin] (from client 10.0.1.2 port 117616641 cli 
0000-0000-0000)
Sending Access-Accept of id 19 to 10.0.1.2 port 5007
    3Com-User-Access-Level = Administrator
Finished request 0

But I cannot be connected on telnet. Now switch(3com 5500-EI) answers 
that incorrect password:
Username:admin
Password:
% Login failed!
> Prompt, what to make in that case. In the file /etc/passwd there is
> >this line of " admin:x:500:500::/home/admin:/bin/bash ". How it
> >is necessary to assign password?
> >
> >  
> >Message: 4
> >Date: Tue, 17 Jun 2008 09:33:31 +0100
> >From: "Ivan Kalik" <tnt at kalik.net>
> >Subject: Re: Problem in connecting to switch on telnet
> >To: "FreeRadius users mailing list"
> >	<freeradius-users at lists.freeradius.org>
> >Message-ID: <JBqwPney.1213691611.8437380.tnt at kalik.co.yu>
> >Content-Type: text/plain; charset=ISO-8859-2
> >
> >You have deleted the part of the debug which tells how is Auth-Type set.
> >Post the whole thing. BTW, now you do have admin account in /etc/passwd
> >but the password is wrong. It's still not using password from the users
> >file.
> >
> >Ivan Kalik
> >Kalik Informatika ISP
> >
> >
> >Dana 17/6/2008, "Guk Viktor" <v.guk at zaz.zp.ua> pi?e:
> >
> >  
> >  
> >    It tried without Auth-Type = System, also tried Auth-Type = Local.
> >
> >Processing the authenticate section of radius.conf
> >modcall: entering group authenticate for request 0
> >rlm_unix: [admin]: invalid password
> >modcall[authenticate]: module "unix" returns reject for request 0
> >modcall: leaving group authenticate (returns reject) for request 0
> >auth: Failed to validate the user.
> >Login incorrect: [admin/admin] (from client 10.0.1.2 port 117612545 cli
> >0000-0000-0000)
> >    
> >    
> >      Message: 4 Date: Fri, 13 Jun 2008 15:38:57 +0100 From: "Ivan Kalik"
> ><tnt at kalik.net> Subject: Re: Problem in connecting to switch on telnet
> >To: "FreeRadius users mailing list"
> ><freeradius-users at lists.freeradius.org> Message-ID:
> ><wbdeeigX.1213367937.5098900.tnt at kalik.co.yu> Content-Type:
> >text/plain; charset=ISO-8859-2 You are setting up the wrong
> >authentication type. Remove Auth-Type =System from user configuration.
> >1.1.3 is old. I am not sure do you need to set Auth-Type there. If it
> >doesn't work without it set Auth-Type = Local. Ivan Kalik Kalik
> >Informatika ISP Dana 13/6/2008, "Guk Viktor" <v.guk at zaz.zp.ua> pi?e:
> >      
> >      
> >        
> >          
> >
> >
> >
> >
> >Hello,
> >
> >I have freeradius-1.1.3 and 3com switch 5500-EI. On the
> >switch is disposed the access of users into the network through
> >freeradius. Arose problem in
> >connecting to switch on telnet. In the log freeradius it is indicated
> >that the incorrect password (however password I introduce correctly).
> >
> >rad_recv: Access-Request packet from host 10.0.1.2:5007, id=1,
> >length=203
> >??????? User-Name = "admin"
> >??????? User-Password = "admin"
> >??????? NAS-IP-Address = 10.0.1.2
> >??????? NAS-Identifier = "001ac1d4ee42"
> >??????? NAS-Port = 117612545
> >??????? NAS-Port-Id = "unit=7;subslot=0;port=42;vlanid=1"
> >??????? NAS-Port-Type = Ethernet
> >??????? Service-Type = Login-User
> >??????? Login-IP-Host = 10.0.1.2
> >??????? Calling-Station-Id = "0000-0000-0000"
> >??????? Framed-IP-Address = 10.0.1.100
> >??????? Vendor-25506-Attr-26 = 0x00000003
> >??????? Vendor-25506-Attr-255 = 0x353530302d4549
> >??????? Vendor-25506-Attr-60 =
> >0x31302e302e312e3130302030303a30303a30303a30303a30303a3030
> >??????? Vendor-25506-Attr-59 = 0x38e68c68
> >? Processing the authorize section of radiusd.conf
> >modcall: entering group authorize for request 0
> >? modcall[authorize]: module "mschap" returns noop for request 0
> >??? rlm_realm: No '\' in User-Name = "admin", looking up realm NULL
> >??? rlm_realm: No such realm "NULL"
> >? modcall[authorize]: module "ntdomain" returns noop for request 0
> >? rlm_eap: No EAP-Message, not doing EAP
> >? modcall[authorize]: module "eap" returns noop for request 0
> >??? users: Matched entry DEFAULT at line 152
> >??? users: Matched entry admin at line 216
> >? modcall[authorize]: module "files" returns ok for request 0
> >modcall: leaving group authorize (returns ok) for request 0
> >? rad_check_password:? Found Auth-Type System
> >auth: type "System"
> >? Processing the authenticate section of
> >radiusd.conf
> >modcall: entering group authenticate for request 0
> >? modcall[authenticate]: module "unix" returns notfound for request 0
> >modcall: leaving group authenticate (returns notfound) for request 0
> >auth: Failed to validate the user.
> >Login incorrect: [admin/admin] (from
> >client 10.0.1.2 port 117612545 cli 0000-0000-0000)
> >Delaying request 0 for 1 seconds
> >Finished request 0
> >
> >Users:
> >admin?? Auth-Type = System, User-Password == "admin"
> >??? ?? 3Com-User-Access-Level = Administrator
> >
> >eap.conf:
> >eap{
> >??? default_eap_type = peap
> >??? timer_expire = 60
> >??? ignore_unknown_eap_type = no
> >??? cisco_accounting_username_bug = no
> >???
> >??? md5{
> >??? ?? }
> >
> >??? leap{
> >??? ?? }
> >
> >??? gtc{
> >??? ?? auth_type = PAP
> >??? ?? }
> >
> >??? peap{
> >??? ?? default_eap_type = mschapv2
> >??? ?? use_tunneled_reply = yes
> >??? ?? }
> >
> >??? mschapv2{
> >??? ?? }
> >??? }
> >
> >It can possibly use a local authorization to switch on telnet,
> >without freeradius.
> >
> >Viktor Guk