Cisco AVpairs again.

[David Bell]

Actually there was nothing wrong with that part of the config.

Had a look at this from a sideways perspective and tried to telnet to it
rather than use the Console.

Works perfectly

So looks like I just need to tell the Cisco how to behave properly when the
request is not via a telnet session.

-----Original Message-----
From: Ivan Kalik [mailto:tnt at kalik.net]
Sent: 04 March 2008 12:36
To: FreeRadius users mailing list
Subject: RE: Cisco AVpairs again.


Cisco documentation. It will say how to log into the device.

Ivan Kalik
Kalik Informatika ISP

Dana 4/3/2008, "David Bell" <David.Bell at dxi.net> piše:

>Ahh so something very fundimental then
>
>How do I chage the request type?
>
>-----Original Message-----
>From: Ivan Kalik [mailto:tnt at kalik.net]
>Sent: 04 March 2008 11:32
>To: FreeRadius users mailing list
>Subject: RE: Cisco AVpairs again.
>
>
>>rad_recv: Access-Request packet from host 212.95.252.25 port 49365, id=20,
>>length=73
>>        NAS-IP-Address = 10.10.11.78
>>        NAS-Port = 0
>>        Cisco-NAS-Port = "tty0"
>>        NAS-Port-Type = Async
>>        User-Name = "tom"
>>        User-Password = "pass1"
>
>This is a dialin not login request.
>
>Ivan Kalik
>Kalik Informatika ISP
>
>-
>List info/subscribe/unsubscribe? See
>http://www.freeradius.org/list/users.html
>
>
>
>-
>List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
>

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html