Compiling git-2.1.1 on debian

[Alexandre Chapellon]

try compiling using bundled libtools
remove "--with-system-libtool" from debian/rules
then relaunch dpkg-builpackages

Le 05.11.2008 09:53, rgreiner a écrit :
> Hi,
>
> I'm trying to compile 2.1.1 on debian using the git version (the
> standard package stops at the beginning due to the problem with the
> patches for debian), and in the middle of the checking part it stopped
> with a message about "INSTALL_LTDL"not being definded (full output
> below). Could someone please give me a help? A quick googling didn't
> come up with anyting useable....
>
> Thanks,
>
> Roberto
>
> dpkg-buildpackage: source package is freeradius
> dpkg-buildpackage: source version is 2.1.1-0
> dpkg-buildpackage: source changed by Alan DeKok <aland at freeradius.org>
> dpkg-buildpackage: host architecture i386
> dpkg-buildpackage: source version without epoch 2.1.1-0
>  debian/rules clean
> dpatch  deapply-all 
> 02-dialupadmin-help not applied to ./ .
> 01-radiusd-to-freeradius not applied to ./ .
> rm -rf patch-stamp patch-stampT debian/patched
> dh_testdir
> dh_clean
> rm -f build-arch-stamp build-indep-stamp libltdl/stamp-h1
> rm -f install-arch-stamp install-indep-stamp configure-stamp
> [ -f Make.inc ] && make distclean || true
> # The make clean forgets to remove this build directory
> [ -d src/modules/lib ] && rm -fr src/modules/lib || true
> # Put the original autotools files back in place
> [ -f config.sub.dist ] && rm config.sub && mv config.sub.dist config.sub
> || true
> [ -f config.guess.dist ] && rm config.guess && mv config.guess.dist
> config.guess || true
>  debian/rules build
> test -d debian/patched || install -d debian/patched
> dpatch  apply-all 
> applying patch 01-radiusd-to-freeradius to ./ ... ok.
> applying patch 02-dialupadmin-help to ./ ... ok.
> dpatch  cat-all  >>patch-stampT
> mv -f patch-stampT patch-stamp
> dh_testdir
> # Update the autotools files if necessary
> # Force Build-Depends on autotools-dev for /usr/share/misc/config.*
> if [ -e config.sub.dist ]; then rm config.sub; else mv config.sub
> config.sub.dist; fi
> if [ -e config.guess.dist ]; then rm config.guess; else mv config.guess
> config.guess.dist; fi
> ln -s /usr/share/misc/config.sub config.sub
> ln -s /usr/share/misc/config.guess config.guess
> ./configure \
>                 --build i486-linux-gnu \
>                 --config-cache \
>                 --prefix=/usr \
>                 --exec-prefix=/usr \
>                 --mandir=/usr/share/man \
>                 --sysconfdir=/etc \
>                 --libdir=/usr/lib/freeradius \
>                 --datadir=/usr/share \
>                 --localstatedir=/var \
>                 --with-raddbdir=/etc/freeradius \
>                 --with-logdir=/var/log/freeradius \
>                 --with-system-libtool --disable-ltdl-install \
>                 --with-large-files --with-udpfromto --with-edir \
>                 --enable-developer \
>                 --with-rlm-sql-postgresql-lib-dir=`pg_config --libdir` \
>                 --with-rlm-sql-postgresql-include-dir=`pg_config
> --includedir`
> configure: creating cache config.cache
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking for g++... no
> checking for c++... no
> checking for gpp... no
> checking for aCC... no
> checking for CC... no
> checking for cxx... no
> checking for cc++... no
> checking for cl.exe... no
> checking for FCC... no
> checking for KCC... no
> checking for RCC... no
> checking for xlC_r... no
> checking for xlC... no
> checking whether we are using the GNU C++ compiler... no
> checking whether g++ accepts -g... no
> checking how to run the C preprocessor... gcc -E
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for AIX... no
> checking whether gcc needs -traditional... no
> checking whether we are using SUNPro C... no
> checking for special C compiler options needed for large files... no
> checking for _FILE_OFFSET_BITS value needed for large files... 64
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking whether byte ordering is bigendian... no
> checking for gmake... no
> checking for make... /usr/bin/make
> checking for lt_dlinit in -lltdl... yes
> configure: WARNING: not overwriting libltdl at /usr, force with
> `--enable-ltdl-install'
> checking build system type... i486-pc-linux-gnu
> checking host system type... i486-pc-linux-gnu
> checking for a sed that does not truncate output... /bin/sed
> checking for fgrep... /bin/grep -F
> checking for ld used by gcc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... 98304
> checking whether the shell understands some XSI constructs... yes
> checking whether the shell understands "+="... yes
> checking for /usr/bin/ld option to reload object files... -r
> checking how to recognize dependent libraries... pass_all
> checking for ar... ar
> checking for strip... strip
> checking for ranlib... ranlib
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for dlfcn.h... yes
> checking whether we are using the GNU C++ compiler... (cached) no
> checking whether g++ accepts -g... (cached) no
> checking which extension is used for runtime loadable modules...
> checking which variable specifies run-time module search path...
> checking for the default library search path...
> checking for library containing dlopen... -ldl
> checking for dlerror... yes
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dld_link in -ldld... no
> checking for _ prefix in compiled symbols... no
> checking whether deplibs are loaded by dlopen... yes
> checking for argz.h... yes
> checking for error_t... yes
> checking for argz_add... yes
> checking for argz_append... yes
> checking for argz_count... yes
> checking for argz_create_sep... yes
> checking for argz_insert... yes
> checking for argz_next... yes
> checking for argz_stringify... yes
> checking if argz actually works... yes
> checking whether libtool supports -dlopen/-dlpreopen... yes
> checking for libtool... /usr/bin/libtool
> checking docdir... ${datadir}/doc/freeradius
> checking logdir... /var/log/freeradius
> checking radacctdir... ${logdir}/radacct
> checking raddbdir... /etc/freeradius
> checking for perl... /usr/bin/perl
> checking for snmpget... /usr/bin/snmpget
> checking for snmpwalk... /usr/bin/snmpwalk
> checking for rusers... /usr/bin/rusers
> checking for locate... /usr/bin/locate
> checking for dirname... /usr/bin/dirname
> checking for grep... (cached) /bin/grep
> checking pthread.h usability... yes
> checking pthread.h presence... yes
> checking for pthread.h... yes
> checking for pthread_create in -lpthread... yes
> checking for library containing sem_init... none required
> checking for getsockname in -lsocket... no
> checking for inet_aton in -lresolv... yes
> checking for inet_ntoa in -lnsl... yes
> checking for DH_new in -lcrypto... yes
> checking for SSL_new in -lssl... yes
> checking for htonl in -lws2_32... no
> checking for pcap_open_live in -lpcap... yes
> checking for a readline compatible library... no
> checking for dirent.h that defines DIR... yes
> checking for library containing opendir... none required
> checking for ANSI C header files... (cached) yes
> checking whether time.h and sys/time.h may both be included... yes
> checking for sys/wait.h that is POSIX.1 compatible... yes
> checking for unistd.h... (cached) yes
> checking crypt.h usability... yes
> checking crypt.h presence... yes
> checking for crypt.h... yes
> checking errno.h usability... yes
> checking errno.h presence... yes
> checking for errno.h... yes
> checking resource.h usability... no
> checking resource.h presence... no
> checking for resource.h... no
> checking sys/resource.h usability... yes
> checking sys/resource.h presence... yes
> checking for sys/resource.h... yes
> checking getopt.h usability... yes
> checking getopt.h presence... yes
> checking for getopt.h... yes
> checking malloc.h usability... yes
> checking malloc.h presence... yes
> checking for malloc.h... yes
> checking utmp.h usability... yes
> checking utmp.h presence... yes
> checking for utmp.h... yes
> checking utmpx.h usability... yes
> checking utmpx.h presence... yes
> checking for utmpx.h... yes
> checking signal.h usability... yes
> checking signal.h presence... yes
> checking for signal.h... yes
> checking sys/select.h usability... yes
> checking sys/select.h presence... yes
> checking for sys/select.h... yes
> checking syslog.h usability... yes
> checking syslog.h presence... yes
> checking for syslog.h... yes
> checking for inttypes.h... (cached) yes
> checking for stdint.h... (cached) yes
> checking stdio.h usability... yes
> checking stdio.h presence... yes
> checking for stdio.h... yes
> checking netdb.h usability... yes
> checking netdb.h presence... yes
> checking for netdb.h... yes
> checking semaphore.h usability... yes
> checking semaphore.h presence... yes
> checking for semaphore.h... yes
> checking arpa/inet.h usability... yes
> checking arpa/inet.h presence... yes
> checking for arpa/inet.h... yes
> checking netinet/in.h usability... yes
> checking netinet/in.h presence... yes
> checking for netinet/in.h... yes
> checking for sys/types.h... (cached) yes
> checking sys/socket.h usability... yes
> checking sys/socket.h presence... yes
> checking for sys/socket.h... yes
> checking winsock.h usability... no
> checking winsock.h presence... no
> checking for winsock.h... no
> checking sys/time.h usability... yes
> checking sys/time.h presence... yes
> checking for sys/time.h... yes
> checking for sys/wait.h... (cached) yes
> checking sys/security.h usability... no
> checking sys/security.h presence... no
> checking for sys/security.h... no
> checking fcntl.h usability... yes
> checking fcntl.h presence... yes
> checking for fcntl.h... yes
> checking sys/fcntl.h usability... yes
> checking sys/fcntl.h presence... yes
> checking for sys/fcntl.h... yes
> checking sys/prctl.h usability... yes
> checking sys/prctl.h presence... yes
> checking for sys/prctl.h... yes
> checking sys/un.h usability... yes
> checking sys/un.h presence... yes
> checking for sys/un.h... yes
> checking glob.h usability... yes
> checking glob.h presence... yes
> checking for glob.h... yes
> checking prot.h usability... no
> checking prot.h presence... no
> checking for prot.h... no
> checking pwd.h usability... yes
> checking pwd.h presence... yes
> checking for pwd.h... yes
> checking grp.h usability... yes
> checking grp.h presence... yes
> checking for grp.h... yes
> checking sia.h usability... no
> checking sia.h presence... no
> checking for sia.h... no
> checking siad.h usability... no
> checking siad.h presence... no
> checking for siad.h... no
> checking for net/if.h... yes
> checking regex.h usability... yes
> checking regex.h presence... yes
> checking for regex.h... yes
> checking openssl/ssl.h usability... yes
> checking openssl/ssl.h presence... yes
> checking for openssl/ssl.h... yes
> checking openssl/crypto.h usability... yes
> checking openssl/crypto.h presence... yes
> checking for openssl/crypto.h... yes
> checking openssl/err.h usability... yes
> checking openssl/err.h presence... yes
> checking for openssl/err.h... yes
> checking openssl/evp.h usability... yes
> checking openssl/evp.h presence... yes
> checking for openssl/evp.h... yes
> checking openssl/engine.h usability... yes
> checking openssl/engine.h presence... yes
> checking for openssl/engine.h... yes
> checking for OpenSSL version >= 0.9.7... yes
> checking pcap.h usability... yes
> checking pcap.h presence... yes
> checking for pcap.h... yes
> checking for off_t... yes
> checking for pid_t... yes
> checking for size_t... yes
> checking for uid_t in sys/types.h... yes
> checking for socklen_t... yes
> checking for uint8_t... yes
> checking for uint16_t... yes
> checking for uint32_t... yes
> checking for struct in6_addr... yes
> checking for struct sockaddr_storage... yes
> checking for struct sockaddr_in6... yes
> checking for struct addrinfo... yes
> checking for getopt_long... yes
> checking for lockf... yes
> checking for strsignal... yes
> checking for sigaction... yes
> checking for sigprocmask... yes
> checking for pthread_sigmask... yes
> checking for snprintf... yes
> checking for vsnprintf... yes
> checking for setsid... yes
> checking for strncasecmp... yes
> checking for strcasecmp... yes
> checking for localtime_r... yes
> checking for ctime_r... yes
> checking for gmtime_r... yes
> checking for strsep... yes
> checking for inet_aton... yes
> checking for inet_pton... yes
> checking for inet_ntop... yes
> checking for setlinebuf... yes
> checking for setvbuf... yes
> checking for getusershell... yes
> checking for initgroups... yes
> checking for getaddrinfo... yes
> checking for getnameinfo... yes
> checking for closefrom... no
> checking for gettimeofday... yes
> checking for getpeereid... no
> checking for strlcat... no
> checking for strlcpy... no
> checking whether crypt must be declared... no
> checking whether strncasecmp must be declared... no
> checking whether strcasecmp must be declared... no
> checking whether inet_aton must be declared... no
> checking whether setlinebuf must be declared... no
> checking whether getusershell must be declared... no
> checking whether endusershell must be declared... no
> checking return type of signal handlers... void
> checking for ut_xtime in struct utmpx... no
> checking for ipi_addr in struct in_pktinfo... yes
> checking for ipi6_addr in struct in6_pktinfo... yes
> checking for an ANSI C-conforming const... yes
> checking type of OS... Linux
> checking for developer gcc flags... yes.  Using -g -Wshadow
> -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings
> -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations
> -Wnested-externs -W -Wredundant-decls -Wundef
> checking for TLS... yes
> checking for crypt in -lcrypt... yes
> checking for setkey in -lcipher... no
> checking gethostbyaddr_r() syntax... GNU-style
> checking gethostbyname_r() syntax... GNU-style
> checking ctime_r() syntax... POSIX-style
> top_builddir=/root/radiusd
> configure: updating cache config.cache
> configure: error: conditional "INSTALL_LTDL" was never defined.
> Usually this means the macro was only invoked conditionally.
> make: *** [configure-stamp] Error 1
>
>
>