Problems in TLS

[Martin Silvero]

Good day.

After testing several options, I got this error:

Does anyone have any suggestions?

thank you very much.





rad_recv: Access-Request packet from host 10.0.31.40 port 1645, id=1,
length=136
        User-Name = "user"
        Framed-MTU = 1400
        Called-Station-Id = "0019.2fdb.9e00"
        Calling-Station-Id = "001f.3c22.44c5"
        Service-Type = Login-User
        Message-Authenticator = 0xd3be97c3a6d121a5d734f193b7bf3870
        EAP-Message = 0x020100090163657274
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 257
        NAS-IP-Address = 10.8.31.40
        NAS-Identifier = "ap-p"
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
    rlm_realm: No '@' in User-Name = "user", looking up realm NULL
    rlm_realm: No such realm "NULL"
++[suffix] returns noop
  rlm_eap: EAP packet type response id 1 length 9
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
    users: Matched entry cert at line 76
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
 rlm_eap_tls: Requiring client certificate
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 1 to 10.0.31.40 port 1645
        EAP-Message = 0x010200060d20
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x6fe46b926fe66623314da1f26c728696
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 1 with timestamp +152067
Ready to process requests.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20081120/960b5c08/attachment.html>