NTLM_auth active directory - what is wrong?
Syed Anwarul Hasan
syedanwarulhasan2007 at gmail.com
Tue Oct 7 15:20:45 CEST 2008
Hi Santiago,
I would suggest you to first try with radtest to see ntlm_auth BIND AS
USER is working or not.
Have a User entry in Users file with Auth-Type := ntlm_auth
Add *ntlm_auth* in Authenticate section of default and inner-tunnel files in
/sites-enabled directory.
Then if radtest returns NT Success Ok or ntlm_auth is being done by Server.
Then Try for RADIUS requests from actual NAS.
I have done this way as of now to check ntlm_auth Bind.
The Experts can show you more light in your problem.
Regards,
SYED
On Tue, Oct 7, 2008 at 2:36 PM, Santiago Matiz V <santimatiz at yahoo.com>wrote:
>
> Hi all
> I follow the instructions of Alan :
>
> <http://deployingradius.com/documents/configuration/active_directory.html>
>
> to authenticate ntlm_auth with radius but appers the following message:
>
> " WARNING: Unknown value specified for Auth-Type. Cannot perform requested
> action.
> auth: Failed to validate the user."
>
> what is wrong?
>
> Please help.
> Santiago
>
>
> FreeRADIUS Version 2.0.5, for host i686-pc-linux-gnu, built on Sep 3 2008
> at 15:55:02
> Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE.
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License v2.
> Starting - reading configuration files ...
> including configuration file /usr/local/etc/raddb/radiusd.conf
> including configuration file /usr/local/etc/raddb/proxy.conf
> including configuration file /usr/local/etc/raddb/clients.conf
> including configuration file /usr/local/etc/raddb/snmp.conf
> including configuration file /usr/local/etc/raddb/eap.conf
> including dictionary file /usr/local/etc/raddb/dictionary
> main {
> prefix = "/usr/local"
> localstatedir = "/var"
> logdir = "/var/log/radius"
> libdir = "/usr/local/lib"
> radacctdir = "/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 1024
> allow_core_dumps = no
> pidfile = "/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/local/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log_auth = yes
> log_auth_badpass = no
> log_auth_goodpass = no
> log_stripped_names = no
> }
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = "testing123"
> nastype = "other"
> }
> client 192.100.16.11 {
> require_message_authenticator = no
> secret = "123"
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = "testing123"
> response_window = 20
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_check = "none"
> ping_interval = 30
> check_interval = 30
> num_answers_to_alive = 3
> num_pings_to_alive = 3
> revive_interval = 120
> status_check_timeout = 4
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> realm DOMAIN.LOC {
> authhost = LOCAL
> accthost = LOCAL
> }
> realm DOMAIN {
> authhost = LOCAL
> accthost = LOCAL
> }
> radiusd: #### Instantiating modules ####
> instantiate {
> Module: Linked to module rlm_expr
> Module: Instantiating expr
> }
> radiusd: #### Loading Virtual Servers ####
> server {
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Linked to module rlm_mschap
> Module: Instantiating mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> --domain=%{mschap:NT-Domain:-DOMAIN}
> --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00}
> --nt-response=%{mschap:NT-Response:-00}"
> }
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_preprocess
> Module: Instantiating preprocess
> preprocess {
> huntgroups = "/usr/local/etc/raddb/huntgroups"
> hints = "/usr/local/etc/raddb/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> Module: Linked to module rlm_realm
> Module: Instantiating realmslash
> realm realmslash {
> format = "prefix"
> delimiter = "\"
> ignore_default = no
> ignore_null = no
> }
> Module: Instantiating suffix
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> Module: Linked to module rlm_eap
> Module: Instantiating eap
> eap {
> default_eap_type = "peap"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> }
> Module: Linked to sub-module rlm_eap_md5
> Module: Instantiating eap-md5
> Module: Linked to sub-module rlm_eap_leap
> Module: Instantiating eap-leap
> Module: Linked to sub-module rlm_eap_gtc
> Module: Instantiating eap-gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> Module: Linked to sub-module rlm_eap_tls
> Module: Instantiating eap-tls
> tls {
> rsa_key_exchange = no
> dh_key_exchange = yes
> rsa_key_length = 512
> dh_key_length = 512
> verify_depth = 0
> pem_file_type = yes
> private_key_file = "/usr/local/etc/raddb/certs/server.pem"
> certificate_file = "/usr/local/etc/raddb/certs/server.pem"
> CA_file = "/usr/local/etc/raddb/certs/ca.pem"
> private_key_password = "whatever"
> dh_file = "/usr/local/etc/raddb/certs/dh"
> random_file = "/usr/local/etc/raddb/certs/random"
> fragment_size = 1024
> include_length = yes
> check_crl = no
> cipher_list = "DEFAULT"
> make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
> }
> Module: Linked to sub-module rlm_eap_ttls
> Module: Instantiating eap-ttls
> ttls {
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> }
> Module: Linked to sub-module rlm_eap_peap
> Module: Instantiating eap-peap
> peap {
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> }
> Module: Linked to module rlm_files
> Module: Instantiating files
> files {
> usersfile = "/usr/local/etc/raddb/users"
> acctusersfile = "/usr/local/etc/raddb/acct_users"
> compat = "no"
> }
> Module: Checking preacct {...} for more modules to load
> Module: Checking accounting {...} for more modules to load
> Module: Linked to module rlm_acct_unique
> Module: Instantiating acct_unique
> acct_unique {
> key = "User-Name, Acct-Session-Id, NAS-IP-Address,
> Client-IP-Address, NAS-Port-Id"
> }
> Module: Linked to module rlm_detail
> Module: Instantiating detail
> detail {
> detailfile =
> "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
> header = "%t"
> detailperm = 384
> dirperm = 493
> locking = no
> log_packet_header = no
> }
> Module: Linked to module rlm_radutmp
> Module: Instantiating radutmp
> radutmp {
> filename = "/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> perm = 384
> callerid = yes
> }
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> }
> }
> radiusd: #### Opening IP addresses and Ports ####
> bind_address = *
> WARNING: The directive 'bind_adress' is deprecated, and will be removed in
> future versions of FreeRADIUS. Please edit the configuration files to use
> the directive 'listen'.
> Listening on authentication address * port 1812
> Listening on accounting address * port 1813
> Listening on proxy address * port 1814
> Ready to process requests.
> rad_recv: Access-Request packet from host 192.100.16.11 port 1308, id=0,
> length=217
> Message-Authenticator = 0x92d1b860b93a1c6d28f08eaa37697101
> Service-Type = Framed-User
> User-Name = "DOMAIN\\user\000"
> Framed-MTU = 1488
> Called-Station-Id = "00-16-E0-04-FE-44:pcountry"
> Calling-Station-Id = "00-1B-77-4D-1A-74"
> NAS-Identifier = "PISO 7 UG SISTEMAS"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message = 0x0200001601434c49434f554e5452595c736d6174697a
> NAS-IP-Address = 192.100.16.11
> NAS-Port = 1
> NAS-Port-Id = "STA port # 1"
> +- entering group authorize
> ++[preprocess] returns ok
> ++[mschap] returns noop
> rlm_realm: Looking up realm "DOMAIN" for User-Name = "DOMAIN\user"
> rlm_realm: Found realm "DOMAIN"
> rlm_realm: Adding Stripped-User-Name = "user"
> rlm_realm: Adding Realm = "DOMAIN"
> rlm_realm: Authentication realm is LOCAL.
> ++[realmslash] returns ok
> rlm_realm: Request already proxied. Ignoring.
> ++[suffix] returns ok
> rlm_eap: EAP packet type response id 0 length 22
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> ++[eap] returns updated
> users: Matched entry user at line 178
> ++[files] returns ok
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> WARNING: Unknown value specified for Auth-Type. Cannot perform requested
> action.
> auth: Failed to validate the user.
> Login incorrect: [DOMAIN\\user\000] (from client 192.100.16.11 port 1 cli
> 00-1B-77-4D-1A-74)
> Sending Access-Reject of id 0 to 192.100.16.11 port 1308
> Finished request 0.
> Going to the next request
> Waking up in 4.9 seconds.
> rad_recv: Access-Request packet from host 192.100.16.11 port 1310, id=0,
> length=217
> Message-Authenticator = 0xf829fc414e9407ab04ede033d5a60941
> Service-Type = Framed-User
> User-Name = "DOMAIN\\user\000"
> Framed-MTU = 1488
> Called-Station-Id = "00-16-E0-04-FE-44:pcountry"
> Calling-Station-Id = "00-1B-77-4D-1A-74"
> NAS-Identifier = "PISO 7 UG SISTEMAS"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message = 0x0200001601434c49434f554e5452595c736d6174697a
> NAS-IP-Address = 192.100.16.11
> NAS-Port = 1
> NAS-Port-Id = "STA port # 1"
> +- entering group authorize
> ++[preprocess] returns ok
> ++[mschap] returns noop
> rlm_realm: Looking up realm "DOMAIN" for User-Name = "DOMAIN\user"
> rlm_realm: Found realm "DOMAIN"
> rlm_realm: Adding Stripped-User-Name = "user"
> rlm_realm: Adding Realm = "DOMAIN"
> rlm_realm: Authentication realm is LOCAL.
> ++[realmslash] returns ok
> rlm_realm: Request already proxied. Ignoring.
> ++[suffix] returns ok
> rlm_eap: EAP packet type response id 0 length 22
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> ++[eap] returns updated
> users: Matched entry user at line 178
> ++[files] returns ok
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> WARNING: Unknown value specified for Auth-Type. Cannot perform requested
> action.
> auth: Failed to validate the user.
> Login incorrect: [DOMAIN\\user\000] (from client 192.100.16.11 port 1 cli
> 00-1B-77-4D-1A-74)
> Sending Access-Reject of id 0 to 192.100.16.11 port 1310
> Finished request 1.
> Going to the next request
> Waking up in 4.7 seconds.
> rad_recv: Access-Request packet from host 192.100.16.11 port 1312, id=0,
> length=217
> Message-Authenticator = 0xef8314925f34ccf891d91ca6fa18857d
> Service-Type = Framed-User
> User-Name = "DOMAIN\\user\000"
> Framed-MTU = 1488
> Called-Station-Id = "00-16-E0-04-FE-44:pcountry"
> Calling-Station-Id = "00-1B-77-4D-1A-74"
> NAS-Identifier = "PISO 7 UG SISTEMAS"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message = 0x0200001601434c49434f554e5452595c736d6174697a
> NAS-IP-Address = 192.100.16.11
> NAS-Port = 1
> NAS-Port-Id = "STA port # 1"
> +- entering group authorize
> ++[preprocess] returns ok
> ++[mschap] returns noop
> rlm_realm: Looking up realm "DOMAIN" for User-Name = "DOMAIN\user"
> rlm_realm: Found realm "DOMAIN"
> rlm_realm: Adding Stripped-User-Name = "user"
> rlm_realm: Adding Realm = "DOMAIN"
> rlm_realm: Authentication realm is LOCAL.
> ++[realmslash] returns ok
> rlm_realm: Request already proxied. Ignoring.
> ++[suffix] returns ok
> rlm_eap: EAP packet type response id 0 length 22
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> ++[eap] returns updated
> users: Matched entry user at line 178
> ++[files] returns ok
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> WARNING: Unknown value specified for Auth-Type. Cannot perform requested
> action.
> auth: Failed to validate the user.
> Login incorrect: [DOMAIN\\user\000] (from client 192.100.16.11 port 1 cli
> 00-1B-77-4D-1A-74)
> Sending Access-Reject of id 0 to 192.100.16.11 port 1312
> Finished request 2.
> Going to the next request
> Waking up in 4.4 seconds.
> Cleaning up request 0 ID 0 with timestamp +113
> Waking up in 0.2 seconds.
> Cleaning up request 1 ID 0 with timestamp +113
> Waking up in 0.2 seconds.
> Cleaning up request 2 ID 0 with timestamp +114
> Ready to process requests.
>
> Santiago Matiz (santimatiz at yahoo.com)
> Systems Engineer
> Bogotá, Colombia (South America)
>
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20081007/4a8c1361/attachment.html>
More information about the Freeradius-Users
mailing list