FreeRadius & Heimdal Kerberos: I'm lost!

[Ronni Feldt]

On Tue, 2008-10-21 at 10:54 +0100, tnt at kalik.net wrote:
>>    users: Matched entry DEFAULT at line 158
>>  modcall[authorize]: module "files" returns ok for request 2
>>rlm_pap: WARNING! No "known good" password found for the user.
>>Authentication may fail because of this.
>>  modcall[authorize]: module "pap" returns noop for request 2
>>modcall: leaving group authorize (returns ok) for request 2
>>  rad_check_password:  Found Auth-Type System
>>auth: type "System"

>You are setting Auth-Type System not Kerberos in users file.


Okey, I had missed that one. I changed /etc/freeradius/users and added
the lines:

DEFAULT Auth-Type = Kerberos
        Fall-Through = 1

I also tried to replace "DEFAULT Auth-Type = System" with "DEFAULT
Auth-Type Kerberos" with the same result.

Both gives me a 'Segmentation fault' ?

Here's the output from freeradius start -X

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc/freeradius/proxy.conf
Config:   including file: /etc/freeradius/clients.conf
Config:   including file: /etc/freeradius/snmp.conf
Config:   including file: /etc/freeradius/eap.conf
Config:   including file: /etc/freeradius/sql.conf
 main: prefix = "/usr"
 main: localstatedir = "/var"
 main: logdir = "/var/log/freeradius"
 main: libdir = "/usr/lib/freeradius"
 main: radacctdir = "/var/log/freeradius/radacct"
 main: hostname_lookups = no
 main: snmp = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/freeradius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/freeradius/freeradius.pid"
 main: user = "freerad"
 main: group = "freerad"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec 
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec) 
Module: Loaded expr 
Module: Instantiated expr (expr) 
Module: Loaded Kerberos 
 krb5: keytab = "/etc/krb5.keytab"
 krb5: service_principal = "radius/rofe.one.com"
rlm_krb5: krb5_init ok
Module: Instantiated krb5 (krb5) 
Module: Loaded PAP 
 pap: encryption_scheme = "crypt"
 pap: auto_header = yes
Module: Instantiated pap (pap) 
Module: Loaded CHAP 
Module: Instantiated chap (chap) 
Module: Loaded MS-CHAP 
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap) 
Module: Loaded System 
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "/etc/shadow"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/freeradius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix) 
Module: Loaded eap 
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap) 
Module: Loaded preprocess 
 preprocess: huntgroups = "/etc/freeradius/huntgroups"
 preprocess: hints = "/etc/freeradius/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
 preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess) 
Module: Loaded realm 
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix) 
Module: Loaded files 
 files: usersfile = "/etc/freeradius/users"
 files: acctusersfile = "/etc/freeradius/acct_users"
 files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files) 
Module: Loaded Acct-Unique-Session-Id 
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique) 
Module: Loaded detail 
 detail: detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail) 
Module: Loaded radutmp 
 radutmp: filename = "/var/log/freeradius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp) 
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.

rad_recv: Access-Request packet from host 192.168.212.4:2841, id=74,
length=103
	User-Name = "ronni at one.com"
	User-Password = "123456"
	NAS-IP-Address = 192.168.212.4
	NAS-Identifier = "ProCurve2650"
	NAS-Port-Type = Virtual
	Service-Type = NAS-Prompt-User
	Message-Authenticator = 0x7acd8c12717744815500f03f07dab8c5
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: Looking up realm "one.com" for User-Name =
"ronni at one.com"
    rlm_realm: No such realm "one.com"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 159
  modcall[authorize]: module "files" returns ok for request 0
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
  modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
  rad_check_password:  Found Auth-Type Kerberos
auth: type "Kerberos"
  Processing the authenticate section of radiusd.conf
modcall: entering group Kerberos for request 0
Segmentation fault



It still cant find my realm.
    rlm_realm: Looking up realm "one.com" for User-Name =
"ronni at one.com"
    rlm_realm: No such realm "one.com"


It's the same when I try:
radtest ronni at one.com 123456 localhost 0 testing123 


- Ronni