Problems with the authentication of users and certificates TLS
Martin Silvero
silvero.martin at gmail.com
Wed Sep 3 22:59:00 CEST 2008
alan!!
and install the new version and the probe, probe with radtest and I get
this:
Sending Access-Request of id 236 to 127.0.0.1 port 1812
User-Name = "test"
User-Password = "testing123"
NAS-IP-Address = 10.30.1.104
NAS-Port = 1812
rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=236,
length=20
its ok but...
radiusd -X run and I get this::
FreeRADIUS Version 2.0.5, for host x86_64-unknown-linux-gnu, built on Sep 3
2008 at 17:32:08
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including configuration file /usr/local/etc/raddb/snmp.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/sql.conf
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/default
including dictionary file /usr/local/etc/raddb/dictionary
main {
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/usr/local/var/log/radius"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
}
client 10.0.6.29 {
require_message_authenticator = no
secret = "testing123"
shortname = "ap"
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_check = "none"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
}
Generating a 2048 bit RSA private key
........................................................................................................................................................................................................................................................................................................+++
.....+++
unable to write 'random state'
writing new private key to 'ca.key'
-----
Generating a 2048 bit RSA private key
.......+++
..................................+++
unable to write 'random state'
writing new private key to 'server.key'
-----
Using configuration from ./server.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 1 (0x1)
Validity
Not Before: Sep 3 20:51:16 2008 GMT
Not After : Sep 3 20:51:16 2009 GMT
Subject:
countryName = FR
stateOrProvinceName = Radius
organizationName = Example Inc.
commonName = Example Server Certificate
emailAddress = admin at example.com
X509v3 extensions:
X509v3 Extended Key Usage:
TLS Web Server Authentication
Certificate is to be certified until Sep 3 20:51:16 2009 GMT (365 days)
Write out database with 1 new entries
Data Base Updated
unable to write 'random state'
unable to write 'random state'
MAC verified OK
Generating DH parameters, 1024 bit long safe prime, generator 2
This is going to take a long time
*****************************+*************************+******************************
...
unable to write 'random state'
Exec-Program output: openssl req -new -x509 -keyout ca.key -out ca.pem
-config ./ca.cnf openssl x509 -inform PEM -outform DER -in ca.pem -out
ca.der openssl req -new -out server.csr -keyout server.key -config
./server.cnf openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr
-key `grep output_password ca.cnf | sed 's/.*=//;s/^ *//'` -out server.crt
-extensions xpserver_ext -extfile xpextensions -config ./server.cnf openssl
pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin
pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout
pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl
pkcs12 -in server.p12 -out server.pem -passin pass:`grep output_password
server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password
server.cnf | sed 's/.*=//;s/^ *//'` openssl dhparam -out dh 1024
Exec-Program-Wait: plaintext: openssl req -new -x509 -keyout ca.key -out
ca.pem -config ./ca.cnf openssl x509 -inform PEM -outform DER -in ca.pem
-out ca.der openssl req -new -out server.csr -keyout server.key -config
./server.cnf openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr
-key `grep output_password ca.cnf | sed 's/.*=//;s/^ *//'` -out server.crt
-extensions xpserver_ext -extfile xpextensions -config ./server.cnf openssl
pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin
pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout
pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl
pkcs12 -in server.p12 -out server.pem -passin pass:`grep output_password
server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password
server.cnf | sed 's/.*=//;s/^ *//'` openssl dhparam -out dh 1024
Exec-Program: returned: 0
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
}
}
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
ERROR: Failed to open socket: cannot bind socket: Address already in use
/usr/local/etc/raddb/radiusd.conf[236]: Error binding to port for
0.0.0.0port 1812
¿a que se debe este error?
Why is this wrong?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080903/81c52337/attachment.html>
More information about the Freeradius-Users
mailing list