user-Password required for ldap radius

[Basant Agarwal]

Hello,  I am trying to authenticate wifi users for wireless network ... for
this i am using freeradius with ldap...
 When we run radtest on localhost, it is able to get authorised and
authenticated .. it works fine but when i try from laptop(windows ) then it
rejects the same user...
please let me know what to do ...??


here is the debug output ..

Ready to process requests.
rad_recv: Access-Request packet from host 172.16.1.80:1122, id=0, length=204
    Message-Authenticator = 0x3f459af06e42a2a0b7cf9c1d80092e31
    Service-Type = Framed-User
    User-Name = "testap"
    Framed-MTU = 1488
    Called-Station-Id = "00-15-E9-C9-F3-80:MNIT-DC-AP"
    Calling-Station-Id = "00-16-6F-7C-DB-2D"
    NAS-Identifier = "D-link Corp. Access Point"
    NAS-Port-Type = Wireless-802.11
    Connect-Info = "CONNECT 54Mbps 802.11g"
    EAP-Message = 0x0200000b01746573746170
    NAS-IP-Address = 172.16.1.80
    NAS-Port = 1
    NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "testap", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 0 length 11
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    users: Matched entry DEFAULT at line 153
    users: Matched entry DEFAULT at line 159
    users: Matched entry DEFAULT at line 177
  modcall[authorize]: module "files" returns ok for request 0
rlm_ldap: - authorize
rlm_ldap: performing user authorization for testap
radius_xlat:  '(uid=testap)'
radius_xlat:  'dc=mnit,dc=ac,dc=in'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to 172.16.1.20:389, authentication 0
rlm_ldap: bind as uid=admin,ou=people,dc=mnit,dc=ac,dc=in/system to
172.16.1.20:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=mnit,dc=ac,dc=in, with filter
(uid=testap)
rlm_ldap: looking for check items in directory...
rlm_ldap: looking for reply items in directory...
rlm_ldap: user testap authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
  modcall[authorize]: module "ldap" returns ok for request 0
rlm_pap: WARNING! No "known good" password found for the user.
Authentication may fail because of this.
  modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type ldap
auth: type "LDAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group LDAP for request 0
rlm_ldap: - authenticate
rlm_ldap: Attribute "User-Password" is required for authentication.
  modcall[authenticate]: module "ldap" returns invalid for request 0
modcall: leaving group LDAP (returns invalid) for request 0
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 0 to 172.16.1.80  <http://172.16.1.80/>port 1122
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 46b1b8cb
Nothing to do.  Sleeping until we see a request.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090403/b89acae5/attachment.html>