NAS table

[JDL]

 >insert into nas (nasname, shortname, secret) values ("client 
127.0.0.1","localhost","passwordradius");

The word "client" is part of the configuration file, not be part of the 
nasname. It should have been.

insert into nas (nasname, shortname, secret) values 
("127.0.0.1","localhost","passwordradius");

Jim L.


Nizar Zulmi wrote:
> this is result of
> freeradius -X
> reread_config:  reading radiusd.conf
> Config:   including file: /etc/freeradius/proxy.conf
> Config:   including file: /etc/freeradius/clients.conf
> Config:   including file: /etc/freeradius/snmp.conf
> Config:   including file: /etc/freeradius/eap.conf
> Config:   including file: /etc/freeradius/sql.conf
>  main: prefix = "/usr"
>  main: localstatedir = "/var"
>  main: logdir = "/var/log/freeradius"
>  main: libdir = "/usr/lib/freeradius"
>  main: radacctdir = "/var/log/freeradius/radacct"
>  main: hostname_lookups = no
>  main: max_request_time = 30
>  main: cleanup_delay = 5
>  main: max_requests = 1024
>  main: delete_blocked_requests = 0
>  main: port = 0
>  main: allow_core_dumps = no
>  main: log_stripped_names = no
>  main: log_file = "/var/log/freeradius/radius.log"
>  main: log_auth = no
>  main: log_auth_badpass = no
>  main: log_auth_goodpass = no
>  main: pidfile = "/var/run/freeradius/freeradius.pid"
>  main: user = "freerad"
>  main: group = "freerad"
>  main: usercollide = no
>  main: lower_user = "no"
>  main: lower_pass = "no"
>  main: nospace_user = "no"
>  main: nospace_pass = "no"
>  main: checkrad = "/usr/sbin/checkrad"
>  main: proxy_requests = yes
>  proxy: retry_delay = 5
>  proxy: retry_count = 3
>  proxy: synchronous = no
>  proxy: default_fallback = yes
>  proxy: dead_time = 120
>  proxy: post_proxy_authorize = no
>  proxy: wake_all_if_all_dead = no
>  security: max_attributes = 200
>  security: reject_delay = 1
>  security: status_server = no
>  main: debug_level = 0
> read_config_files:  reading dictionary
> read_config_files:  reading naslist
> Using deprecated naslist file.  Support for this will go away soon.
> read_config_files:  reading clients
>
> but if i uncommnet this on clients.conf
> client 127.0.0.1 {
>        secret          = passwordradius
>        shortname       = localhost
>        nastype     = other     # localhost isn't usually a NAS...
> }
>
> the radius is running well and reply access-accept on radtest
>
> where do i make missconfiguration.
> clue please.
>
> *From:* Ivan Kalik <tnt at kalik.net>
> *To:* FreeRadius users mailing list 
> <freeradius-users at lists.freeradius.org>
> *Sent:* Tuesday, April 14, 2009 7:25:02 PM
> *Subject:* RE: NAS table
>
> Post radiusd -X output of server startup. Is sql enabled anywhere in 
> the configuration? It isn't by default.
>  
> Ivan Kalik
> Kalik Informatika ISP
>
>     -----Original Message-----
>     *From:*
>     freeradius-users-bounces+tnt=kalik.net at lists.freeradius.org
>     [mailto:freeradius-users-bounces+tnt=kalik.net at lists.freeradius.org]
>     *On Behalf Of *Nizar Zulmi
>     *Sent:* 14 April 2009 08:00
>     *To:* FreeRadius users mailing list
>     *Subject:* Re: NAS table
>
>     i comment out this on clients.conf
>     #client 127.0.0.1 {
>     #       secret          = passwordradius
>     #       shortname       = localhost
>     #       nastype     = other     # localhost isn't usually a NAS...
>     #}
>     and i add this to NAS table on radius database.
>     insert into nas (nasname, shortname, secret) values ("client
>     127.0.0.1","localhost","passwordradius");
>
>     i restart the mysql server and then i perform test using radtest
>     and got this message:
>     radtest Nizar 123456 localhost 1812 passwordradius
>     Sending Access-Request of id 104 to 127.0.0.1 port 1812
>             User-Name = "Nizar"
>             User-Password = "123456"
>             NAS-IP-Address = 255.255.255.255
>             NAS-Port = 1812
>     ....
>     Re-sending Access-Request of id 104 to 127.0.0.1 port 1812
>             User-Name = "Nizar"
>             User-Password = "123456"
>             NAS-IP-Address = 255.255.255.255
>             NAS-Port = 1812
>     radclient: no response from server for ID 104
>
>     why its still dosn't work..??
>     clue plase...
>
>     --- On *Tue, 4/14/09, JDL /<JDL at imaginenet.net>/* wrote:
>
>
>         From: JDL <JDL at imaginenet.net>
>         Subject: Re: NAS table
>         To: "FreeRadius users mailing list"
>         <freeradius-users at lists.freeradius.org>
>         Date: Tuesday, April 14, 2009, 11:42 AM
>
>         Nizar Zulmi wrote:
>         > i enable this on sql.conf
>         > readclients = yes
>         >
>         > do i have to remove this :
>         > client 127.0.0.1 {
>         Do you have a "127.0.0.1" client in your the nas table? If so,
>         then yes, you will need to remove it or else you will end up
>         with a duplicate. If this client is not in your nas table,
>         then you can just leave the 127.0.0.1 client in the
>         clients.conf file.
>
>         BTW, I think the 127.0.0.1 client is just there for testing
>         purposes. I do not believe it will break anything if it is
>         completely removed (unless, of course, you are running also
>         running some sort of radius client on the same server as
>         FreeRADIUS).
>
>         Jim L.
>         -
>         List info/subscribe/unsubscribe? See
>         http://www.freeradius.org/list/users.html
>
>
>     No virus found in this incoming message.
>     Checked by AVG - www.avg.com <http://www.avg.com>
>     Version: 8.0.238 / Virus Database: 270.11.53/2054 - Release Date:
>     04/11/09 10:51:00
>
>
> ------------------------------------------------------------------------
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html