Re: Ayuda (en español)

[gera]

I'm not sure if spanish help is accepted on the list. If not, please
indicate.


Diego, estás usando EAP para autenticar? Si no es asi, deshabilita las
opciones de eap en los archivos de configuración. ¿A qué te refieres con que
funciona en local?

Haría falta conocer mas detalles sobre lo que intentas. Archivos de
configuración sin comentarios sería bastante útil.

Saludos.

2009/12/15 Diego Chovares Moreno <dmasalaves at gmail.com>

> Hola, a ver si hay alguien que hable español y me pueda ayudar. Tengo un
> freeradius instalado sobre un ubuntu server y en local me funciona, pero
> cuando quiero conectarme por wifi mediante un punto de acceso me sale:
>
> rad_recv: Access-Request packet from host 192.168.1.1 port 1084, id=1,
> length=206
> Message-Authenticator = 0x789bf39c8f59de88701888fc6ed3a2f2
> Service-Type = Framed-User
> User-Name = "diego\000"
> Framed-MTU = 1488
> State = 0x734ffec0734ee45437bb08e87fc6420c
> Called-Station-Id = "00-15-E9-A3-01-CE:radius"
> Calling-Station-Id = "00-15-AF-9F-8D-E0"
> NAS-Identifier = "D-Link Access Point"
> NAS-Port-Type = Wireless-802.11
> Connect-Info = "CONNECT 54Mbps 802.11g"
> EAP-Message = 0x020100060319
> NAS-IP-Address = 192.168.1.1
> NAS-Port = 1
> NAS-Port-Id = "STA port # 1"
> +- entering group authorize {...}
> ++[preprocess] returns ok
> ++[mschap] returns noop
> [suffix] No '@' in User-Name = "diego", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] EAP packet type response id 1 length 6
> [eap] No EAP Start, assuming it's an on-going EAP conversation
> ++[eap] returns updated
> ++[unix] returns notfound
> ++[files] returns noop
> expand: %{User-Name} -> diego
> [sql] sql_set_user escaped user --> 'diego'
> rlm_sql (sql): Reserving sql socket id: 3
> expand: SELECT id, username, attribute, value, op FROM radcheck WHERE
> username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute,
> value, op FROM radcheck WHERE username = 'diego' ORDER BY id
> [sql] User found in radcheck table
> expand: SELECT id, username, attribute, value, op FROM radreply WHERE
> username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute,
> value, op FROM radreply WHERE username = 'diego' ORDER BY id
> expand: SELECT groupname FROM radusergroup WHERE username =
> '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup
> WHERE username = 'diego' ORDER BY priority
> rlm_sql (sql): Released sql socket id: 3
> ++[sql] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> [pap] Found existing Auth-Type, not changing it.
> ++[pap] returns noop
> Found Auth-Type = EAP
> +- entering group authenticate {...}
> [eap] Request found, released from the list
> [eap] EAP NAK
> [eap] NAK asked for unsupported type 25
> [eap] No common EAP types found.
> [eap] Failed in EAP select
> ++[eap] returns invalid
> Failed to authenticate the user.
> Using Post-Auth-Type Reject
> +- entering group REJECT {...}
> expand: %{User-Name} -> diego
> [sql] sql_set_user escaped user --> 'diego'
> expand: %{User-Password} ->
> expand: %{Chap-Password} ->
> expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES (
> '%{User-Name}', '%{%{User-Password}[image: Silbando despreocupadamente]%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass,
> reply, authdate) VALUES ( 'diego', '', 'Access-Reject', '2009-11-27
> 17:33:06')
> rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username,
> pass, reply, authdate) VALUES ( 'diego', '', 'Access-Reject', '2009-11-27
> 17:33:06')
> rlm_sql (sql): Reserving sql socket id: 2
> rlm_sql (sql): Released sql socket id: 2
> ++[sql] returns ok
> expand: %{User-Name} -> diego
> attr_filter: Matched entry DEFAULT at line 11
> ++[attr_filter.access_reject] returns updated
> Delaying reject of request 1 for 1 seconds
> Going to the next request
> Waking up in 0.9 seconds.
> Sending delayed reject for request 1
> Sending Access-Reject of id 1 to 192.168.1.1 port 1084
> EAP-Message = 0x04010004
> Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.9 seconds.
> Cleaning up request 0 ID 0 with timestamp +53
> Waking up in 0.9 seconds.
> Cleaning up request 1 ID 1 with timestamp +53
> Ready to process requests.
>
> No se porque me pasa esto:
> [eap] Request found, released from the list
> [eap] EAP NAK
> [eap] NAK asked for unsupported type 25
> [eap] No common EAP types found.
> [eap] Failed in EAP select
>
> La gente me dice que es porque no tengo librerias ssl instaladas, pero e
> instalado todas las que he encontrado, pero sigue sin funcionarme.... estoy
> desesperado.
> Gracias y saludos
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20091215/de23c2bd/attachment.html>