Freeradius2.1.3 + Fedora9 + PEAP + AD = problem
Casartello, Thomas
tcasartello at wsc.ma.edu
Fri Feb 13 03:06:50 CET 2009
I have exactly the same problem with Fedora 9 and 10 only. It works
perfectly fine in Fedora 8 with the exact same configuration. I have spent
hours trying to fix this, and could not figure it out.
Thomas E. Casartello, Jr.
Staff Assistant - Wireless Technician/Linux Administrator
Information Technology
Wilson 105A
Westfield State College
Red Hat Certified Technician (RHCT)
-----Original Message-----
From: freeradius-users-bounces+tcasartello=wsc.ma.edu at lists.freeradius.org
[mailto:freeradius-users-bounces+tcasartello=wsc.ma.edu at lists.freeradius.org
] On Behalf Of Andrey.Trubnikov at unicreditgroup.ru
Sent: Thursday, February 12, 2009 8:58 AM
To: freeradius-users at lists.freeradius.org
Subject: Freeradius2.1.3 + Fedora9 + PEAP + AD = problem
Hi
I configure Freeradius 2.1.3 how it describes in
http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWTO
but it doesn't work.
here is debug output:
FreeRADIUS Version 2.1.3, for host i386-redhat-linux-gnu, built on Dec 8
2008 at 16:00:08
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/inner-tunnel
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
client 10.6.0.0/16 {
require_message_authenticator = no
secret = "secret"
shortname = "cisco"
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--domain=%{mschap:NT-Domain} --username=%{mschap:User-Name}
--challenge=%{mschap:Challenge:-00}
--nt-response=%{mschap:NT-Response:-00}"
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
}
}
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=123,
length=155
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message = 0x02020019015350422e494d422e52555c747275626e696b6f76
Message-Authenticator = 0xca609e950b9d1b6e044b7b1e35ece327
NAS-Port-Type = Ethernet
NAS-Port = 50020
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 25
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 123 to 10.6.0.86 port 1645
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f59c899961300b089b526f445b
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=124,
length=228
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message =
0x0203005019800000004616030100410100003d03014994289f6e90304c75136fa081c24849
e67c260665de87b51c9522d501063e5000001600040005000a00090064006200030006001300
1200630100
Message-Authenticator = 0xc5b019218bd1efacc9eb8657720601d4
NAS-Port-Type = Ethernet
NAS-Port = 50020
State = 0x9c8a80f59c899961300b089b526f445b
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 70
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0041], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 002a], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 085e], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 124 to 10.6.0.86 port 1645
EAP-Message =
0x0104040019c00000089b160301002a020000260301499428a3397c48ef2bf058423bf7bdf3
f533b0e82d1d2323c12b36198d9554ff00000400160301085e0b00085a0008570003a6308203
a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
6d706c6520436572746966696361746520417574686f72697479
EAP-Message =
0x301e170d3039303231323132353633385a170d3130303231323132353633385a307c310b30
09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
0100be607ef369a0c5d803e13ed311e4ce6722607bd2b51a05394de4dcaaf45d4b2e0bae9e00
1a76dfac328a9e85beea2a32a40504b3fe3d3b9f51a76eac7999
EAP-Message =
0x457c18dc35beb05d700d0f0149de5709341a4c9b873c1001a74516e6594bf82b1fa72e2e09
b4e32e4e3dc4a420f648506461e877942742347e42ea0d48614badf4866a4226b63fa2fcd8bc
0f980544c4d04405ee96e5e656041e720eb92483ee20c26b2b82b840c3c33e6b05b9ba947e94
0e7a5a0efd802a9046d67232300932bd7eeaa16e6887768c4836819d0dba80eed0612cdeeb28
2c680df57f65cc27ab9f56dd53420b9219d72d0f735e9a97d8aa755b7bf3402bfcc011ec6cc2
76fbf125db0203010001a317301530130603551d25040c300a06082b06010505070301300d06
092a864886f70d0101040500038201010086ca73bda33dac167f
EAP-Message =
0x80bc8fd2e714597d56198a94b45dcecbe3bd868c88fe759344759cf4a200205eeaedc66355
0feb4d86c7856d1cf6de9c8d87e2e35abd54eb2056b8c6c52e16ec95d4b58ff41bdbdcd85157
c0bcafb01db3bab55e704d8a4bb3a23db7bde2721b3145ad4a0375616b008cf3cfb3f44eb8a8
b2e3988c7a003f925f5fb3265b94844486254b2a6fe9e116e06a45a7b8c7e43a141dbbad2b91
c0d767de58cc82bfa86f648d47049f4ac425137e83cfb8af113e12dcd0e9ac4c7f41d8d61c9e
3b9cc5249d173c308c56d09c0fb504590e2fc4fdfa45f57703738925c24ba72feb69d05e4f4d
be0491c3c2216bd8fe7540b4a490cf2ed4f13f360004ab308204
EAP-Message = 0xa73082038fa0030201020209
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f59d8e9961300b089b526f445b
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=125,
length=154
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message = 0x020400061900
Message-Authenticator = 0x0e848ffd6bb8351f5ef907ebde5b7874
NAS-Port-Type = Ethernet
NAS-Port = 50020
State = 0x9c8a80f59d8e9961300b089b526f445b
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 125 to 10.6.0.86 port 1645
EAP-Message =
0x010503fc194000adc70b5be0044ad3300d06092a864886f70d0101050500308193310b3009
060355040613024652310f300d06035504081306526164697573311230100603550407130953
6f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a
864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d
4578616d706c6520436572746966696361746520417574686f72697479301e170d3039303231
323132353633385a170d3130303231323132353633385a308193310b30090603550406130246
52310f300d060355040813065261646975733112301006035504
EAP-Message =
0x071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120
301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603
550403131d4578616d706c6520436572746966696361746520417574686f7269747930820122
300d06092a864886f70d01010105000382010f003082010a0282010100d597421324695f36aa
e1a4ae9647c315c17da1da6caaa82a1028db432f0951f98af8947a591c0f77cfb99dd948e217
f540840d7b9a1bfd31059173f700f582d017b9da6ff4f0b4c168def0b87dec3281d066ed8a67
11431b92fe65234f5dfab96205f8f933b107fb283c79e4530e9f
EAP-Message =
0x2db2999043968b3d4d1081804b5896d30be16a0bc958a3b9d91aeff3075d36aa8d93758bfd
86770e6647af75f60600b95e675eaffdb0b55c8e08aa5b56f970d6120ee85db50ae37b5c020e
ee094f81e8c8b25c9ee5e817365a7c88173b46479bd45b42896894321e147b319e9cac56cebc
7e0c883a44d8662842068281cedf9f2226d45fb9551ff7eac9231c9e0647e8a50203010001a3
81fb3081f8301d0603551d0e0416041455460e5d2216933d47b1213dcba48130590f3f803081
c80603551d230481c03081bd801455460e5d2216933d47b1213dcba48130590f3f80a18199a4
8196308193310b3009060355040613024652310f300d06035504
EAP-Message =
0x0813065261646975733112301006035504071309536f6d6577686572653115301306035504
0a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e40
6578616d706c652e636f6d312630240603550403131d4578616d706c65204365727469666963
61746520417574686f72697479820900adc70b5be0044ad3300c0603551d13040530030101ff
300d06092a864886f70d010105050003820101000ca4fa0b2aeffd6f41b81c005b44979fb69b
b157f76d01da7df39102b54c920862d6e184047adde5178e98f2b8d635dd9be7eae5e2b39640
a7d5164cbd3f2cb1f080ea6b8b852b39e603151bb38ab0d744eb
EAP-Message = 0xa0d53927f55728a7
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f59e8f9961300b089b526f445b
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=126,
length=154
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message = 0x020500061900
Message-Authenticator = 0x16385baf4cb2818e88325444881d1247
NAS-Port-Type = Ethernet
NAS-Port = 50020
State = 0x9c8a80f59e8f9961300b089b526f445b
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 126 to 10.6.0.86 port 1645
EAP-Message =
0x010600b51900aa0831430c97a13773e7deac05ec51fcbd0f3d4126c04ed338ec3d6213a156
682ba77e3840cbd0b30bbcb2e14c5e2103a1b6bfa11381916245226510c11d083385ac4f08c3
7e80267304e623ad73a104b26a124f324eff7d42ef6cf02f8bfd456664c793bd4cf1e2e8cda3
f565a40decd9f9ba557d9f6933cf5d710a395e11e0d6654a5da345c48f4e91eeab7174a64912
a5495e04a0b82daf07bbb9af7db00c0f5452738d1616030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f59f8c9961300b089b526f445b
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=127,
length=470
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message =
0x02060140198000000136160301010610000102010078a20bd953aea703502943c0e100284b
5c866240b1d05afbf17f5c83411c651a86d18f15491f2b28be61f0fc2ca5ae927f11607777fe
d0c96e089fc07acf3f31ac8add249b45fafc690a0e4fb6cea1aad9041c188e602fa171ee2a50
54ff7a0d38ba2d06dc5766d04f1b16f7bfd5c886a424b2298b745098be9446996003741f308d
a494612bc0f0cedc9d8c472390a2a3d90d3ba9495a9d2c2776de2badbf9cfcfa5a2e4262d3ed
54094bec0b61a83912fa6134ed1b22ec63fa039f6c93b976df06dad786cf1a38164cdb645ce0
7d75a640d2f49da9c5987f1deafd07ac91c3722cecdea9459600
EAP-Message =
0x29d5d86f8e2440200273e63839ac3a263bdd90dc7aa1005d1403010001011603010020face
fc49020de52c0a23b0d8fdbbe5912ab3268be088aa6c4dea17a9c8e91ab9
Message-Authenticator = 0xf6aecb8339699f0c4fe8e16a5e63ead0
NAS-Port-Type = Ethernet
NAS-Port = 50020
State = 0x9c8a80f59f8c9961300b089b526f445b
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 310
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
[peap] TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap] TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 write finished A
[peap] TLS_accept: SSLv3 flush data
[peap] (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 127 to 10.6.0.86 port 1645
EAP-Message =
0x0107003119001403010001011603010020e49a8d4b1fd41d9c02ec41a3b101afe07da0b4e9
635fde3e11cb6b0c9c979c07
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f5988d9961300b089b526f445b
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=128,
length=154
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message = 0x020700061900
Message-Authenticator = 0x0db67edd1af97688be40d5c86c800a5e
NAS-Port-Type = Ethernet
NAS-Port = 50020
State = 0x9c8a80f5988d9961300b089b526f445b
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 128 to 10.6.0.86 port 1645
EAP-Message =
0x0108002019001703010015a20163ee50d59c13086db8efb27fdb8847cd1ba680
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f599829961300b089b526f445b
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=129,
length=196
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message =
0x020800301900170301002522a3717e23f4deab80a11045682aca6e40f14811082939e96a5a
fde4c52730cb4fc2263852
Message-Authenticator = 0xc32ec3ed44e0fd447b981ddffff6cf5c
NAS-Port-Type = Ethernet
NAS-Port = 50020
State = 0x9c8a80f599829961300b089b526f445b
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 48
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] Identity - SPB.IMB.RU\trubnikov
[peap] Got tunneled request
EAP-Message = 0x02080019015350422e494d422e52555c747275626e696b6f76
server {
PEAP: Got tunneled identity of SPB.IMB.RU\trubnikov
PEAP: Setting default EAP type for tunneled EAP session.
PEAP: Setting User-Name to SPB.IMB.RU\trubnikov
Sending tunneled request
EAP-Message = 0x02080019015350422e494d422e52555c747275626e696b6f76
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "SPB.IMB.RU\\trubnikov"
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 8 length 25
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
EAP-Message =
0x0109002e1a0109002910ecbf829566172500625bf7620a4f36795350422e494d422e52555c
747275626e696b6f76
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x49749f5a497d85df4b8501b130a3e04c
[peap] Got tunneled reply RADIUS code 11
EAP-Message =
0x0109002e1a0109002910ecbf829566172500625bf7620a4f36795350422e494d422e52555c
747275626e696b6f76
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x49749f5a497d85df4b8501b130a3e04c
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 129 to 10.6.0.86 port 1645
EAP-Message =
0x010900451900170301003ae178bf20a442a8ff436523b002959ace4150be491e8556ec798a
439ef98a4b92c28e69dd1717e1e27fbe0081f057d5adc31304e15be33f58af79
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f59a839961300b089b526f445b
Finished request 6.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 10.6.0.86 port 1645, id=130,
length=250
User-Name = "SPB.IMB.RU\\trubnikov"
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = "00-13-C3-81-2A-16"
Calling-Station-Id = "00-11-25-45-BB-9A"
EAP-Message =
0x020900661900170301005b17cfadd420103a62807796ebc81cccc17ba868a0b32728ff8bd1
be18aecfc4f8ee7032778a54581ecd13584dba8f36928343485c3718fbe3d96aba19ba1b9ece
6a082e8a44ae4d9633e5ee1a2b24a4804836cfcc5f49c7456b9fd4
Message-Authenticator = 0x42701fb6beac1b74efafc2943d30f102
NAS-Port-Type = Ethernet
NAS-Port = 50020
State = 0x9c8a80f59a839961300b089b526f445b
NAS-IP-Address = 10.6.0.86
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 9 length 102
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] EAP type mschapv2
[peap] Got tunneled request
EAP-Message =
0x0209004f1a0209004a3183289583fd8f07645a9e0b401989b0aa00000000000000005b2390
610fbbb0a33313369bf434352cf94105042703b5e0005350422e494d422e52555c747275626e
696b6f76
server {
PEAP: Setting User-Name to SPB.IMB.RU\trubnikov
Sending tunneled request
EAP-Message =
0x0209004f1a0209004a3183289583fd8f07645a9e0b401989b0aa00000000000000005b2390
610fbbb0a33313369bf434352cf94105042703b5e0005350422e494d422e52555c747275626e
696b6f76
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "SPB.IMB.RU\\trubnikov"
State = 0x49749f5a497d85df4b8501b130a3e04c
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "SPB.IMB.RU\trubnikov", looking up realm
NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 9 length 79
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured. Cannot create LM-Password.
[mschap] No Cleartext-Password configured. Cannot create NT-Password.
[mschap] Told to do MS-CHAPv2 for trubnikov with NT-Password
[mschap] expand: --domain=%{mschap:NT-Domain} -> --domain=SPB.IMB.RU
[mschap] expand: --username=%{mschap:User-Name} ->
--username=trubnikov
[mschap] mschap2: ec
[mschap] expand: --challenge=%{mschap:Challenge:-00} ->
--challenge=9bb858a0208cb30a
[mschap] expand: --nt-response=%{mschap:NT-Response:-00} ->
--nt-response=5b2390610fbbb0a33313369bf434352cf94105042703b5e0
Exec-Program output: NT_KEY: E5E69707F927B4D612960B8BE48C7887
Exec-Program-Wait: plaintext: NT_KEY: E5E69707F927B4D612960B8BE48C7887
Exec-Program: returned: 0
[mschap] adding MS-CHAPv2 MPPE keys
++[mschap] returns ok
MSCHAP Success
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
EAP-Message =
0x010a00331a0309002e533d4542393639383845463231373142353038303237333732443544
4239463534333937393336394337
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x49749f5a487e85df4b8501b130a3e04c
[peap] Got tunneled reply RADIUS code 11
EAP-Message =
0x010a00331a0309002e533d4542393639383845463231373142353038303237333732443544
4239463534333937393336394337
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x49749f5a487e85df4b8501b130a3e04c
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 130 to 10.6.0.86 port 1645
EAP-Message =
0x010a004a1900170301003f7201bd50ad95ad02eed7b8c10e950ce1d0858a8d2e64401635f1
f270813682833ee111b5a1eb2db22fd25daf6a8fea82236d0ff920182b9e3325150deefeeb
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9c8a80f59b809961300b089b526f445b
Finished request 7.
Going to the next request
Waking up in 4.8 seconds.
Cleaning up request 0 ID 123 with timestamp +51
Cleaning up request 1 ID 124 with timestamp +51
Cleaning up request 2 ID 125 with timestamp +51
Cleaning up request 3 ID 126 with timestamp +51
Cleaning up request 4 ID 127 with timestamp +51
Cleaning up request 5 ID 128 with timestamp +51
Cleaning up request 6 ID 129 with timestamp +51
Cleaning up request 7 ID 130 with timestamp +51
Ready to process requests.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3169 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090212/066ab4ad/attachment.bin>
More information about the Freeradius-Users
mailing list